[erledigt] - kein Gleisplan und keine Lokomotiven

[erledigt] - kein Gleisplan und keine Lokomotiven

Postby Peter Mueller » 31.01.2016, 21:04

- Anfängerfrage und gerne nur ein Link, wo ich weiter nachlesen kann -

Ich habe Rocweb eingerichtet, die Seite "Rocweb" mit der Kopfzeile und dem Menü bekomme ich auch angezeigt, aber kein Gleisplan und keine Lokomotiven. Irgendjemand eine Idee, wo mein Fehler liegt oder wo ich nachschauen kann?
Last edited by Peter Mueller on 01.02.2016, 13:53, edited 1 time in total.
Sincerely, Peter


I like the active participation in patchwork model railroading, layouts that are built up by several teammates quickly for a short time.
Peter Mueller
 

Re: kein Gleisplan und keine Lokomotiven

Postby hermannk » 31.01.2016, 21:15

Moin Peter,
im Wiki findest du die Details, wie Rocrail zu konfigurieren ist, damit man Rocweb einsetzen kann:
siehe http://wiki.rocrail.net/doku.php?id=rocweb:rocweb-de
Es grüßt von der Ostsee der Hermann
[Spur N] [Mac OS X] [Raspberry Pi 2 B] [OpenDCC GBM-Master, GBM16T] [OneControl + BiDiBone] [Rocweb]
hermannk
 

Re: kein Gleisplan und keine Lokomotiven

Postby YellowFlash » 31.01.2016, 21:16

Spur N, GBM von fichtelbahn mit Rocrail auf Win7
YellowFlash
 

Re: kein Gleisplan und keine Lokomotiven

Postby hermannk » 31.01.2016, 21:21

Moin Peter,
noch ein Nachtrag: wenn auf dem Web-Browser sich keine Änderungen anzeigen, obwohl man doch die Konfiguration geändert hat, dann liegt es gerne an dem Cache des Web-Browsers. Ich musste nach jeder Konfigurations-Änderung den Cache von Safari auf meinem Mac löschen. Das sparte Frust.
Wenn alles richtig konfiguriert ist, macht es Spass mit Rocweb zu arbeiten.
Es grüßt von der Ostsee der Hermann
[Spur N] [Mac OS X] [Raspberry Pi 2 B] [OpenDCC GBM-Master, GBM16T] [OneControl + BiDiBone] [Rocweb]
hermannk
 

Re: kein Gleisplan und keine Lokomotiven

Postby Schorse » 31.01.2016, 21:39

Hallo Peter,

besitzt Du einen gültigen Lizenzschlüssel?

Gerd
Viele Grüße Gerd
Schorse
 

Re: kein Gleisplan und keine Lokomotiven

Postby Peter Mueller » 31.01.2016, 22:06

Schorse wrote:besitzt Du einen gültigen Lizenzschlüssel?

Erhalten bereits am 7.5.2012, und vier Jahre bis zum 8.5.2016 gültig. Aber wenn ich das hier so lese, liegt es eventuell doch am Lizenzschlüssel:

Dachboden_2016-01-31a1.png


Denn Rocweb erkennt nicht meine RocRail-Version (10635).



An die übrigen Schreiber auch vielen Dank. Aber wenn mein Tablet bereits die Rocweb-Oberfläche anzeigt, besteht zumindest schon mal Kontakt zum RocRail-Server. Die grundsätzliche Einrichtung sollte geklappt haben, nur ein paar Details sind noch nicht so wie sie sein sollten.
You do not have the required permissions to view the files attached to this post.
Sincerely, Peter


I like the active participation in patchwork model railroading, layouts that are built up by several teammates quickly for a short time.
Peter Mueller
 

Re: kein Gleisplan und keine Lokomotiven

Postby Peter Mueller » 31.01.2016, 23:40

Hier noch eine RocRail-Trace-Datei:
Code: Select all
--------------------------------------------------
                                            lll   
                                        iii lll   
                                            lll   
 rrrrrr   ooooo   ccccc rrrrrr   aaaaaa iii lll   
 rrr rrr ooo ooo ccc    rrr rrr aaa aaa iii lll   
 rrr     ooo ooo ccc    rrr     aaa aaa iii lll   
 rrr      ooooo   ccccc rrr      aaaaaa iii  lll 
--------------------------------------------------
 TM and Copyright 2002-2016 Robert Jan Versluis.
 All Rights Reserved.
   r.j.versluis@rocrail.net
   http://www.rocrail.net
--------------------------------------------------
 Rocrail 10635 [8435165bad3b40c026ff69afa0976da0ac01524b]
 Build: Jan 31 2016 04:09:36
 librocs 2.0-0 build Jan 31 2016 04:09:11
 processid = 2085
       mac = 000D60FBC24E0000
--------------------------------------------------
20160131.223027.764 r9999I main     OSystem  0564 expdate = 08-05-2016
The license expires in 98 days.
20160131.223027.765 r9999I main     OApp     0987 dpIID = []
20160131.223027.765 r9999I main     OApp     0988 ptIID = []
20160131.223027.766 r9999I main     OApp     0989 svIID = []
20160131.223027.766 r9999I main     OApp     0990 lcIID = []
20160131.223027.796 r9999I main     OModel   0443 parsePlan file: /home/peter/rocrail/aktuell.xml
20160131.223027.859 r9999I main     OModel   0471 merge locos from file [/home/peter/rocrail/loco.xml]
20160131.223027.859 r9999I main     OModPlan 0148 parse file: /home/peter/rocrail/loco.xml
20160131.223027.968 r9999I main     OAnalyse 11124 MRD[100] ExtChk: basic[1]c[0] block[1]c[0] route[1]c[0] action[1]c[0]
20160131.223027.969 r9999I main     OAnalyse 8659 checking plan health...
20160131.223027.973 r9999W main     OAnalyse 8875 WARNING: signal 202b(main) GREEN uses same address 0-9999-0 as 202b(main) (aMapKey=0-9999-0-0-1-Tams-0-)
20160131.223027.974 r9999W main     OAnalyse 8852 WARNING: signal 202a(main) RED uses same address 0-9999-0 as 202b(main) (aMapKey=0-9999-0-0-1-Tams-0-)
20160131.223027.974 r9999W main     OAnalyse 8875 WARNING: signal 202a(main) GREEN uses same address 0-9999-0 as 202b(main) (aMapKey=0-9999-0-0-1-Tams-0-)
20160131.223027.975 r9999W main     OAnalyse 8852 WARNING: signal 201a(main) RED uses same address 0-9999-0 as 202b(main) (aMapKey=0-9999-0-0-1-Tams-0-)
20160131.223027.975 r9999W main     OAnalyse 8875 WARNING: signal 201a(main) GREEN uses same address 0-9999-0 as 202b(main) (aMapKey=0-9999-0-0-1-Tams-0-)
20160131.223027.975 r9999W main     OAnalyse 8852 WARNING: signal 201b(main) RED uses same address 0-9999-0 as 202b(main) (aMapKey=0-9999-0-0-1-Tams-0-)
20160131.223027.976 r9999W main     OAnalyse 8875 WARNING: signal 201b(main) GREEN uses same address 0-9999-0 as 202b(main) (aMapKey=0-9999-0-0-1-Tams-0-)
20160131.223027.981 r9999I main     OAnalyse 4124 mod x: 0 y: 0
20160131.223028.007 r9999I main     OAnalyse 9109 Starting zlevel check
20160131.223028.008 r9999I main     OAnalyse 3740 zlevel check: 83 items
20160131.223028.009 r9999I main     OAnalyse 9131 INFO: object [tx] with id [B4 "PM2"] at [13,23,0] is the most far away object in the plan
20160131.223028.009 r9999I main     OAnalyse 9142 INFO: analyser: max connector distance is 23 (def/min=10)
20160131.223028.009 r9999I main     OAnalyse 9143 INFO: analyser: min z-level is 0 , max z-level is 0
20160131.223028.009 r9999I main     OAnalyse 9157 Plan is healthy
20160131.223028.010 r9999I main     OAnalyse 0192 cleaning up the ANALYSER...
20160131.223028.010 r9999I main     OAnalyse 0259 ANALYSER is cleaned up
20160131.223028.010 r9999I main     OModel   0509 parsePlan title: Ebene0.xml
20160131.223028.010 r9999I main     OModel   3925 init clearingMaps...
20160131.223028.011 r9999I main     OModel   3951 init creatingMaps...
20160131.223028.018 r9999I main     OModel   3955 init creatingFbAddrMap...
20160131.223028.019 r9999I main     OModel   2708 createFbAddrMap: size=0.
20160131.223028.039 r9999I main     OLoc     4639 no restore wanted: reset speed for loco [061. BR 101]
20160131.223028.090 r9999I main     OLcDrive 0721 LcDriver 2.0.0 loaded for 061. BR 101
20160131.223028.090 r9999I main     OLoc     4669 loco [061. BR 101] enterside=[+]
20160131.223028.090 r9999I main     OLoc     4639 no restore wanted: reset speed for loco [065. BR 403]
20160131.223028.091 r9999I main     OLcDrive 0721 LcDriver 2.0.0 loaded for 065. BR 403
20160131.223028.091 r9999I main     OLoc     4669 loco [065. BR 403] enterside=[+]
20160131.223028.092 r9999I main     OLoc     4639 no restore wanted: reset speed for loco [062. BR 185]
20160131.223028.092 r9999I main     OLoc     4643 no restore wanted: reset functions for loco [062. BR 185]
20160131.223028.092 r9999I main     OLcDrive 0721 LcDriver 2.0.0 loaded for 062. BR 185
20160131.223028.092 r9999I main     OLoc     4669 loco [062. BR 185] enterside=[+]
20160131.223028.093 r9999I main     OLoc     4639 no restore wanted: reset speed for loco [669. BR 146]
20160131.223028.093 r9999I main     OLoc     4643 no restore wanted: reset functions for loco [669. BR 146]
20160131.223028.093 r9999I main     OLcDrive 0721 LcDriver 2.0.0 loaded for 669. BR 146
20160131.223028.094 r9999I main     OLoc     4669 loco [669. BR 146] enterside=[+]
20160131.223028.094 r9999I main     OLoc     4639 no restore wanted: reset speed for loco [673. BR 103]
20160131.223028.094 r9999I main     OLoc     4643 no restore wanted: reset functions for loco [673. BR 103]
20160131.223028.095 r9999I main     OLcDrive 0721 LcDriver 2.0.0 loaded for 673. BR 103
20160131.223028.095 r9999I main     OLoc     4669 loco [673. BR 103] enterside=[+]
20160131.223028.095 r9999I main     OLoc     4639 no restore wanted: reset speed for loco [668. BR 141]
20160131.223028.096 r9999I main     OLoc     4643 no restore wanted: reset functions for loco [668. BR 141]
20160131.223028.096 r9999I main     OLcDrive 0721 LcDriver 2.0.0 loaded for 668. BR 141
20160131.223028.097 r9999I main     OLoc     4669 loco [668. BR 141] enterside=[+]
20160131.223028.097 r9999I main     OLoc     4639 no restore wanted: reset speed for loco [066. RE 482 RAG]
20160131.223028.097 r9999I main     OLoc     4643 no restore wanted: reset functions for loco [066. RE 482 RAG]
20160131.223028.098 r9999I main     OLcDrive 0721 LcDriver 2.0.0 loaded for 066. RE 482 RAG
20160131.223028.098 r9999I main     OLoc     4669 loco [066. RE 482 RAG] enterside=[+]
20160131.223028.098 r9999I main     OLoc     4639 no restore wanted: reset speed for loco [674. BR 216]
20160131.223028.098 r9999I main     OLoc     4643 no restore wanted: reset functions for loco [674. BR 216]
20160131.223028.099 r9999I main     OLcDrive 0721 LcDriver 2.0.0 loaded for 674. BR 216
20160131.223028.099 r9999I main     OLoc     4669 loco [674. BR 216] enterside=[+]
20160131.223028.100 r9999I main     OLoc     4639 no restore wanted: reset speed for loco [664. BR 220]
20160131.223028.100 r9999I main     OLoc     4643 no restore wanted: reset functions for loco [664. BR 220]
20160131.223028.100 r9999I main     OLcDrive 0721 LcDriver 2.0.0 loaded for 664. BR 220
20160131.223028.100 r9999I main     OLoc     4669 loco [664. BR 220] enterside=[+]
20160131.223028.101 r9999I main     OLoc     4639 no restore wanted: reset speed for loco [064. BR 044]
20160131.223028.101 r9999I main     OLoc     4643 no restore wanted: reset functions for loco [064. BR 044]
20160131.223028.101 r9999I main     OLcDrive 0721 LcDriver 2.0.0 loaded for 064. BR 044
20160131.223028.102 r9999I main     OLoc     4669 loco [064. BR 044] enterside=[+]
20160131.223028.102 r9999I main     OLoc     4639 no restore wanted: reset speed for loco [070. BDn738]
20160131.223028.102 r9999I main     OLoc     4643 no restore wanted: reset functions for loco [070. BDn738]
20160131.223028.103 r9999I main     OLcDrive 0721 LcDriver 2.0.0 loaded for 070. BDn738
20160131.223028.103 r9999I main     OLoc     4669 loco [070. BDn738] enterside=[+]
20160131.223028.103 r9999I main     OLoc     4639 no restore wanted: reset speed for loco [073. BR 212]
20160131.223028.104 r9999I main     OLcDrive 0721 LcDriver 2.0.0 loaded for 073. BR 212
20160131.223028.104 r9999I main     OLoc     4669 loco [073. BR 212] enterside=[+]
20160131.223028.105 r9999I main     OLoc     4639 no restore wanted: reset speed for loco [670. BR 515]
20160131.223028.105 r9999I main     OLcDrive 0721 LcDriver 2.0.0 loaded for 670. BR 515
20160131.223028.105 r9999I main     OLoc     4669 loco [670. BR 515] enterside=[+]
20160131.223028.106 r9999I main     OLoc     4639 no restore wanted: reset speed for loco [075. BR 442]
20160131.223028.106 r9999I main     OLcDrive 0721 LcDriver 2.0.0 loaded for 075. BR 442
20160131.223028.106 r9999I main     OLoc     4669 loco [075. BR 442] enterside=[+]
20160131.223028.107 r9999I main     OLoc     4639 no restore wanted: reset speed for loco [076. Thalys]
20160131.223028.107 r9999I main     OLcDrive 0721 LcDriver 2.0.0 loaded for 076. Thalys
20160131.223028.107 r9999I main     OLoc     4669 loco [076. Thalys] enterside=[+]
20160131.223028.108 r9999I main     OLoc     4639 no restore wanted: reset speed for loco [078. Duewag GT8]
20160131.223028.108 r9999I main     OLoc     4643 no restore wanted: reset functions for loco [078. Duewag GT8]
20160131.223028.109 r9999I main     OLcDrive 0721 LcDriver 2.0.0 loaded for 078. Duewag GT8
20160131.223028.109 r9999I main     OLoc     4669 loco [078. Duewag GT8] enterside=[+]
20160131.223028.109 r9999I main     OLoc     4639 no restore wanted: reset speed for loco [666. EMD F7]
20160131.223028.109 r9999I main     OLoc     4643 no restore wanted: reset functions for loco [666. EMD F7]
20160131.223028.110 r9999I main     OLcDrive 0721 LcDriver 2.0.0 loaded for 666. EMD F7
20160131.223028.110 r9999I main     OLoc     4669 loco [666. EMD F7] enterside=[+]
20160131.223028.110 r9999I main     OLoc     4639 no restore wanted: reset speed for loco [077. Staubsaugerwagen]
20160131.223028.111 r9999I main     OLoc     4643 no restore wanted: reset functions for loco [077. Staubsaugerwagen]
20160131.223028.111 r9999I main     OLcDrive 0721 LcDriver 2.0.0 loaded for 077. Staubsaugerwagen
20160131.223028.111 r9999I main     OLoc     4669 loco [077. Staubsaugerwagen] enterside=[+]
20160131.223028.112 r9999I main     OLoc     4639 no restore wanted: reset speed for loco [663. BT2]
20160131.223028.112 r9999I main     OLoc     4643 no restore wanted: reset functions for loco [663. BT2]
20160131.223028.113 r9999I main     OLcDrive 0721 LcDriver 2.0.0 loaded for 663. BT2
20160131.223028.113 r9999I main     OLoc     4669 loco [663. BT2] enterside=[+]
20160131.223028.113 r9999I main     OLoc     4639 no restore wanted: reset speed for loco [063. RE 482 Cargo]
20160131.223028.113 r9999I main     OLoc     4643 no restore wanted: reset functions for loco [063. RE 482 Cargo]
20160131.223028.114 r9999I main     OLcDrive 0721 LcDriver 2.0.0 loaded for 063. RE 482 Cargo
20160131.223028.114 r9999I main     OLoc     4669 loco [063. RE 482 Cargo] enterside=[+]
20160131.223028.115 r9999I main     OLoc     4639 no restore wanted: reset speed for loco [068. BR 420]
20160131.223028.115 r9999I main     OLoc     4643 no restore wanted: reset functions for loco [068. BR 420]
20160131.223028.116 r9999I main     OLcDrive 0721 LcDriver 2.0.0 loaded for 068. BR 420
20160131.223028.116 r9999I main     OLoc     4669 loco [068. BR 420] enterside=[+]
20160131.223028.116 r9999I main     OLoc     4639 no restore wanted: reset speed for loco [662. G1206 E+H 543]
20160131.223028.116 r9999I main     OLoc     4643 no restore wanted: reset functions for loco [662. G1206 E+H 543]
20160131.223028.117 r9999I main     OLcDrive 0721 LcDriver 2.0.0 loaded for 662. G1206 E+H 543
20160131.223028.117 r9999I main     OLoc     4669 loco [662. G1206 E+H 543] enterside=[+]
20160131.223028.118 r9999I main     OLoc     4639 no restore wanted: reset speed for loco [670. BR 815]
20160131.223028.118 r9999I main     OLoc     4643 no restore wanted: reset functions for loco [670. BR 815]
20160131.223028.118 r9999I main     OLcDrive 0721 LcDriver 2.0.0 loaded for 670. BR 815
20160131.223028.118 r9999I main     OLoc     4669 loco [670. BR 815] enterside=[+]
20160131.223028.119 r9999I main     OLoc     4639 no restore wanted: reset speed for loco [074. BR 185]
20160131.223028.119 r9999I main     OLoc     4643 no restore wanted: reset functions for loco [074. BR 185]
20160131.223028.120 r9999I main     OLcDrive 0721 LcDriver 2.0.0 loaded for 074. BR 185
20160131.223028.120 r9999I main     OLoc     4669 loco [074. BR 185] enterside=[+]
20160131.223028.120 r9999I main     OLoc     4639 no restore wanted: reset speed for loco [661. G1206 E+H 542]
20160131.223028.120 r9999I main     OLoc     4643 no restore wanted: reset functions for loco [661. G1206 E+H 542]
20160131.223028.121 r9999I main     OLcDrive 0721 LcDriver 2.0.0 loaded for 661. G1206 E+H 542
20160131.223028.121 r9999I main     OLoc     4669 loco [661. G1206 E+H 542] enterside=[+]
20160131.223028.122 r9999I main     OLoc     4639 no restore wanted: reset speed for loco [667. G1206 E+H 549]
20160131.223028.122 r9999I main     OLoc     4643 no restore wanted: reset functions for loco [667. G1206 E+H 549]
20160131.223028.122 r9999I main     OLcDrive 0721 LcDriver 2.0.0 loaded for 667. G1206 E+H 549
20160131.223028.123 r9999I main     OLoc     4669 loco [667. G1206 E+H 549] enterside=[+]
20160131.223028.123 r9999I main     OLoc     4639 no restore wanted: reset speed for loco [064. BR 044 II]
20160131.223028.123 r9999I main     OLoc     4643 no restore wanted: reset functions for loco [064. BR 044 II]
20160131.223028.124 r9999I main     OLcDrive 0721 LcDriver 2.0.0 loaded for 064. BR 044 II
20160131.223028.124 r9999I main     OLoc     4669 loco [064. BR 044 II] enterside=[+]
20160131.223028.124 r9999I main     OLoc     4639 no restore wanted: reset speed for loco [068. BR 420 II]
20160131.223028.125 r9999I main     OLoc     4643 no restore wanted: reset functions for loco [068. BR 420 II]
20160131.223028.125 r9999I main     OLcDrive 0721 LcDriver 2.0.0 loaded for 068. BR 420 II
20160131.223028.125 r9999I main     OLoc     4669 loco [068. BR 420 II] enterside=[+]
20160131.223028.126 r9999I main     OLoc     4639 no restore wanted: reset speed for loco [660. G1206 E+H 541]
20160131.223028.126 r9999I main     OLoc     4643 no restore wanted: reset functions for loco [660. G1206 E+H 541]
20160131.223028.126 r9999I main     OLcDrive 0721 LcDriver 2.0.0 loaded for 660. G1206 E+H 541
20160131.223028.127 r9999I main     OLoc     4669 loco [660. G1206 E+H 541] enterside=[+]
20160131.223028.127 r9999I main     OLoc     4639 no restore wanted: reset speed for loco [665. G1206 E+H 546]
20160131.223028.127 r9999I main     OLoc     4643 no restore wanted: reset functions for loco [665. G1206 E+H 546]
20160131.223028.128 r9999I main     OLcDrive 0721 LcDriver 2.0.0 loaded for 665. G1206 E+H 546
20160131.223028.128 r9999I main     OLoc     4669 loco [665. G1206 E+H 546] enterside=[+]
20160131.223028.128 r9999I main     OModel   3980 init creatingFbAddrMap...
20160131.223028.129 r9999I main     OModel   2730 createSwAddrMap: size=23.
20160131.223028.129 r9999I main     OModel   2751 createCoAddrMap: size=2.
20160131.223028.129 r9999I main     OModel   5882 loading occupancy file [occ.xml]
20160131.223028.148 r9999I main     OModel   3985 init blocks...
20160131.223028.150 r9999I main     OSerial  0222 open rc=0 read=0 write=0 [0] [OK]
20160131.223028.150 r9999I main     OSerial  0227 blocking[1] directIO[0]
20160131.223028.150 r9999I main     OSerial  0287 set bps to 600 (requested=0)
20160131.223028.150 r9999I main     OSerial  0222 open rc=2 read=-1 write=-1 [2] [No such file or directory]
20160131.223028.151 r9999I main     OSerial  0222 open rc=0 read=0 write=0 [0] [OK]
20160131.223028.151 r9999I main     OSerial  0227 blocking[1] directIO[0]
20160131.223028.151 r9999I main     OSerial  0287 set bps to 600 (requested=0)
20160131.223028.151 r9999I main     OSerial  0222 open rc=2 read=-1 write=-1 [2] [No such file or directory]
20160131.223028.152 r9999I main     OControl 2215 devices: "/dev/ttyS0,/dev/ttyS1,/dev/ttyUSB0"
20160131.223028.153 r9999I main     OControl 1782 initDigInts lib="tamsmc" idd="Tams"
20160131.223028.206 r9999I main     OTamsMC  0370 ----------------------------------------
20160131.223028.206 r9999I main     OTamsMC  0371 tamsmc 2.0.99
20160131.223028.207 r9999I main     OTamsMC  0372 iid    = Tams
20160131.223028.207 r9999I main     OTamsMC  0373 ----------------------------------------
20160131.223028.207 r9999I main     OTamsMC  0382 try to load [/opt/rocrail/p50x]
20160131.223028.254 r9999I main     OP50x    1831 ----------------------------------------
20160131.223028.254 r9999I main     OP50x    1832 p50x 2.0.0
20160131.223028.254 r9999I main     OP50x    1833 ----------------------------------------
20160131.223028.255 r9999I main     OP50x    1835 iOP50x[Tams]: /dev/ttyUSB0,57600,none,8,2,cts
20160131.223028.255 r9999I main     OP50x    1839 p50x timeout=1000
20160131.223028.255 r9999I main     OP50x    1840 p50x ctsretry=1000
20160131.223028.255 r9999I main     OP50x    1841 p50x readbidi=0
20160131.223028.255 r9999I main     OP50x    1842 p50x readfb=1
20160131.223028.256 r9999I main     OP50x    1843 p50x fbmod=0
20160131.223028.256 r9999I main     OP50x    1844 p50x poll sleep=200
20160131.223028.256 r9999I main     OP50x    1845 p50x swtime=250
20160131.223028.256 r9999I main     OP50x    1846 ----------------------------------------
20160131.223028.263 r9999I main     OSerial  0222 open rc=0 read=0 write=0 [0] [OK]
20160131.223028.263 r9999I main     OSerial  0227 blocking[1] directIO[0]
20160131.223028.263 r9999I main     OSerial  0254 set CRTSCTS
20160131.223028.264 r9999I main     OSerial  0287 set bps to 57600 (requested=57600)
20160131.223028.269 r9999I main     OControl 1859 initDigInts OK
20160131.223028.269 r9999I main     OPowerMa 0558 Power Manager instantiated.
20160131.223028.270 r9999I main     OControl 0179 Init short circuit sensor...
20160131.223028.270 r9999I checker  OControl 2139 Checker started.
20160131.223028.270 r9999I clocktic OControl 2055 ClockTicker started.
20160131.223028.271 r9999I main     OClntCon 0640 ClientConnection started on port 8051.
20160131.223028.271 r9999I main     OSystem  0564 expdate = 08-05-2016
20160131.223028.272 r9999I statread OP50x    1376 Status reader started.
20160131.223028.272 r9999I broadcas OClntCon 0519 Broadcaster started.
20160131.223028.272 r9999I phtm0981 OHttp    0325 Rocweb manager started on 8088.
20160131.223028.272 r9999I phts0981 OHttp    0193 Rocweb service started on 8088.
20160131.223028.273 r9999I cconmngr OClntCon 0400 Manager started.
20160131.223028.273 r9999I lightrun OLightCt 0098 light control started...
20160131.223028.273 r9999I evtreade OP50x    1085 PTevent reader started.
20160131.223028.274 r9999I makeWeat OWeather 0817 make weather started...
20160131.223028.286 r9999I main     OSystem  0564 expdate = 08-05-2016
20160131.223028.286 r9999I main     OArchive 0504 ------------------------------------------------------------
20160131.223028.286 r9999I main     OArchive 0505 @Box
20160131.223028.287 r9999I main     OArchive 0506   home     = [abox]
20160131.223028.287 r9999I main     OArchive 0507   readonly = [false]
20160131.223028.287 r9999I main     OArchive 0508   Copyright (c) 2002-2016 Robert Jan Versluis, Rocrail.net
20160131.223028.287 r9999I main     OArchive 0509   All rights reserved.
20160131.223028.287 r9999I main     OArchive 0510 ------------------------------------------------------------
20160131.223028.288 r9999I main     OArchive 0397 read ini [abox/rocabox.ini]
20160131.223028.305 r9999I main     OArchive 0415 categories = []
20160131.223028.306 r9999I main     OModel   2163 Checking all Loco's for V=0...
20160131.223028.372 r9999I statread OP50x    0637 Sending XNOP...
20160131.223028.595 r9999I 065. BR  OLoc     2124 Runner for "065. BR 403" started.
20160131.223028.596 r9999I 062. BR  OLoc     2124 Runner for "062. BR 185" started.
20160131.223028.596 r9999I 061. BR  OLoc     2124 Runner for "061. BR 101" started.
20160131.223028.597 r9999I 669. BR  OLoc     2124 Runner for "669. BR 146" started.
20160131.223028.598 r9999I 673. BR  OLoc     2124 Runner for "673. BR 103" started.
20160131.223028.600 r9999I 668. BR  OLoc     2124 Runner for "668. BR 141" started.
20160131.223028.602 r9999I 066. RE  OLoc     2124 Runner for "066. RE 482 RAG" started.
20160131.223028.603 r9999I 674. BR  OLoc     2124 Runner for "674. BR 216" started.
20160131.223028.604 r9999I 664. BR  OLoc     2124 Runner for "664. BR 220" started.
20160131.223028.605 r9999I 064. BR  OLoc     2124 Runner for "064. BR 044" started.
20160131.223028.606 r9999I 070. BDn OLoc     2124 Runner for "070. BDn738" started.
20160131.223028.607 r9999I 073. BR  OLoc     2124 Runner for "073. BR 212" started.
20160131.223028.608 r9999I 670. BR  OLoc     2124 Runner for "670. BR 515" started.
20160131.223028.608 r9999I main     OModel   3696 init Track Driver blocks...
20160131.223028.609 r9999I main     OModel   0681 updateFB
20160131.223028.609 r9999I 075. BR  OLoc     2124 Runner for "075. BR 442" started.
20160131.223028.611 r9999I 076. Tha OLoc     2124 Runner for "076. Thalys" started.
20160131.223028.612 r9999I 078. Due OLoc     2124 Runner for "078. Duewag GT8" started.
20160131.223028.613 r9999I 666. EMD OLoc     2124 Runner for "666. EMD F7" started.
20160131.223028.615 r9999I 077. Sta OLoc     2124 Runner for "077. Staubsaugerwagen" started.
20160131.223028.617 r9999I 663. BT2 OLoc     2124 Runner for "663. BT2" started.
20160131.223028.617 r9999I 063. RE  OLoc     2124 Runner for "063. RE 482 Cargo" started.
20160131.223028.619 r9999I 068. BR  OLoc     2124 Runner for "068. BR 420" started.
20160131.223028.621 r9999I 662. G12 OLoc     2124 Runner for "662. G1206 E+H 543" started.
20160131.223028.621 r9999I 670. BR  OLoc     2124 Runner for "670. BR 815" started.
20160131.223028.623 r9999I 074. BR  OLoc     2124 Runner for "074. BR 185" started.
20160131.223028.625 r9999I 661. G12 OLoc     2124 Runner for "661. G1206 E+H 542" started.
20160131.223028.625 r9999I 667. G12 OLoc     2124 Runner for "667. G1206 E+H 549" started.
20160131.223028.627 r9999I 064. BR  OLoc     2124 Runner for "064. BR 044 II" started.
20160131.223028.629 r9999I 068. BR  OLoc     2124 Runner for "068. BR 420 II" started.
20160131.223028.630 r9999I 660. G12 OLoc     2124 Runner for "660. G1206 E+H 541" started.
20160131.223028.630 r9999I 665. G12 OLoc     2124 Runner for "665. G1206 E+H 546" started.
20160131.223028.883 r9999I statread OP50x    0666 Version info requested...
20160131.223028.895 r9999I statread OP50x    0835 TamsMC version --- 1.4.8 --- extended functions enabled
20160131.223028.895 r9999I statread OP50x    0848 TamsMC serial# --- 00000607 ---
20160131.223106.979 r9999I cconmngr OClntCon 0420 client connect count: 1
20160131.223106.985 r9999I cmdrB700 OClntCon 0251 cmdReader started for:192.168.2.109.
20160131.223106.985 r9999I infwB700 OClntCon 0105 infoWriter started for:192.168.2.109.
20160131.223107.986 r9999I cmdrB700 OClntCon 0307 monitoring for client is on
20160131.223107.986 r9999I cmdrB700 OClntCon 0323 client has control access
20160131.223107.987 r9999I cmdrB700 OControl 1369 command from [rocview,-1249887924,2134]
20160131.223107.987 r9999I cmdrB700 OSystem  0564 expdate = 08-05-2016
20160131.223107.987 r9999I cmdrB700 OModel   2485 valid donation key:
20160131.223109.047 r9999I cmdrB700 OModel   2551 Sending 0 fstats to client...
20160131.223119.361 r9999W statread OControl 1636 power off, freeze clock
20160131.223119.361 r9999I statread OControl 0834 freeze/resume clock not possible with real time
20160131.223135.044 r9999c cmdrB700 OSwitch  1182 Switch [79] will be set to [turnout,0,0]
20160131.223135.045 r9999c cmdrB700 OP50x    0315 turnout 79 thrown
20160131.223140.720 r9999c cmdrB700 OSwitch  1182 Switch [79] will be set to [straight,0,0]
20160131.223140.721 r9999c cmdrB700 OP50x    0315 turnout 79 straight
20160131.223258.883 r9999I phts0981 OPClient 0357 write options 10
20160131.223258.986 r9999I phts0981 OSystem  0564 expdate = 08-05-2016
20160131.223259.103 r9999I phts0981 OPClient 0393 write model plan 88256
20160131.223443.620 r9999c cmdrB700 OP50x    0496 Power OFF
20160131.223443.631 r9999I cmdrB700 OModel   2344 informing 31 listeners of a system event name=sys val=stop...
20160131.223444.616 r9999c cmdrB700 OP50x    0510 Power ON
20160131.223444.637 r9999I cmdrB700 OModel   2344 informing 31 listeners of a system event name=sys val=go...
20160131.223444.942 r9999I tid0xB72 OLoc     0467 restore started for 061. BR 101
20160131.223444.942 r9999I tid0xB72 OLoc     0473 restoring lights for 061. BR 101
20160131.223444.953 r9999c 061. BR  OP50x    0392 loc 61 speed=0 lights=on dir=forwards
20160131.223445.142 r9999I tid0xB72 OLoc     0467 restore started for 065. BR 403
20160131.223445.142 r9999I tid0xB72 OLoc     0473 restoring lights for 065. BR 403
20160131.223445.156 r9999c 065. BR  OP50x    0392 loc 65 speed=0 lights=on dir=forwards
20160131.223445.443 r9999I tid0xB72 OLoc     0492 restoring lights for 061. BR 101
20160131.223445.472 r9999I 061. BR  OLoc     1293 lc=061. BR 101 [addr=61] [fn=0] lights=on -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20160131.223445.472 r9999c 061. BR  OP50x    0392 loc 61 speed=0 lights=on dir=forwards
20160131.223445.493 r9999c 061. BR  OP50x    0478 loc 61 f1=off f2=off f3=off f4=off f5=off f6=off f7=off f8=off
20160131.223445.643 r9999I tid0xB72 OLoc     0492 restoring lights for 065. BR 403
20160131.223445.690 r9999I 065. BR  OLoc     1293 lc=065. BR 403 [addr=65] [fn=0] lights=on -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20160131.223445.691 r9999c 065. BR  OP50x    0392 loc 65 speed=0 lights=on dir=forwards
20160131.223445.738 r9999c 065. BR  OP50x    0478 loc 65 f1=off f2=off f3=off f4=off f5=off f6=off f7=off f8=off
20160131.223445.943 r9999I tid0xB72 OLoc     0505 restoring function 1 for 061. BR 101 fg=1 fx=1
20160131.223446.040 r9999I 061. BR  OLoc     1293 lc=061. BR 101 [addr=61] [fn=1] lights=on 01 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20160131.223446.040 r9999c 061. BR  OP50x    0478 loc 61 f1=on f2=off f3=off f4=off f5=off f6=off f7=off f8=off
20160131.223447.142 r9999I tid0xB72 OLoc     0467 restore started for 073. BR 212
20160131.223447.142 r9999I tid0xB72 OLoc     0473 restoring lights for 073. BR 212
20160131.223447.225 r9999c 073. BR  OP50x    0392 loc 73 speed=0 lights=on dir=reverse
20160131.223447.342 r9999I tid0xB72 OLoc     0467 restore started for 670. BR 515
20160131.223447.343 r9999I tid0xB72 OLoc     0473 restoring lights for 670. BR 515
20160131.223447.432 r9999c 670. BR  OP50x    0392 loc 670 speed=0 lights=on dir=forwards
20160131.223447.542 r9999I tid0xB72 OLoc     0467 restore started for 075. BR 442
20160131.223447.542 r9999I tid0xB72 OLoc     0473 restoring lights for 075. BR 442
20160131.223447.625 r9999c 075. BR  OP50x    0392 loc 75 speed=0 lights=on dir=forwards
20160131.223447.643 r9999I tid0xB72 OLoc     0492 restoring lights for 073. BR 212
20160131.223447.680 r9999I 073. BR  OLoc     1293 lc=073. BR 212 [addr=73] [fn=0] lights=on -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20160131.223447.681 r9999c 073. BR  OP50x    0392 loc 73 speed=0 lights=on dir=reverse
20160131.223447.738 r9999c 073. BR  OP50x    0478 loc 73 f1=off f2=off f3=off f4=off f5=off f6=off f7=off f8=off
20160131.223447.744 r9999I tid0xB72 OLoc     0467 restore started for 076. Thalys
20160131.223447.744 r9999I tid0xB72 OLoc     0473 restoring lights for 076. Thalys
20160131.223447.864 r9999c 076. Tha OP50x    0392 loc 76 speed=0 lights=on dir=forwards
20160131.223447.869 r9999I tid0xB72 OLoc     0492 restoring lights for 670. BR 515
20160131.223447.891 r9999I 670. BR  OLoc     1293 lc=670. BR 515 [addr=670] [fn=0] lights=on -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20160131.223447.892 r9999c 670. BR  OP50x    0392 loc 670 speed=0 lights=on dir=forwards
20160131.223447.981 r9999c 670. BR  OP50x    0478 loc 670 f1=off f2=off f3=off f4=off f5=off f6=off f7=off f8=off
20160131.223448.077 r9999I tid0xB72 OLoc     0492 restoring lights for 075. BR 442
20160131.223448.144 r9999I tid0xB72 OLoc     0505 restoring function 1 for 073. BR 212 fg=1 fx=1
20160131.223448.185 r9999I 075. BR  OLoc     1293 lc=075. BR 442 [addr=75] [fn=0] lights=on -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20160131.223448.186 r9999c 075. BR  OP50x    0392 loc 75 speed=0 lights=on dir=forwards
20160131.223448.188 r9999I 073. BR  OLoc     1293 lc=073. BR 212 [addr=73] [fn=1] lights=on 01 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20160131.223448.189 r9999c 073. BR  OP50x    0478 loc 73 f1=on f2=off f3=off f4=off f5=off f6=off f7=off f8=off
20160131.223448.209 r9999c 075. BR  OP50x    0478 loc 75 f1=off f2=off f3=off f4=off f5=off f6=off f7=off f8=off
20160131.223448.244 r9999I tid0xB72 OLoc     0492 restoring lights for 076. Thalys
20160131.223448.295 r9999I 076. Tha OLoc     1293 lc=076. Thalys [addr=76] [fn=0] lights=on -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20160131.223448.296 r9999c 076. Tha OP50x    0392 loc 76 speed=0 lights=on dir=forwards
20160131.223448.320 r9999c 076. Tha OP50x    0478 loc 76 f1=off f2=off f3=off f4=off f5=off f6=off f7=off f8=off
20160131.223448.745 r9999I tid0xB72 OLoc     0505 restoring function 1 for 076. Thalys fg=1 fx=1
20160131.223448.765 r9999I 076. Tha OLoc     1293 lc=076. Thalys [addr=76] [fn=1] lights=on 01 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20160131.223448.766 r9999c 076. Tha OP50x    0478 loc 76 f1=on f2=off f3=off f4=off f5=off f6=off f7=off f8=off
20160131.223540.259 r9999I cmdrB700 OSocket  0676 Other side has closed connection.
20160131.223540.260 r9999I cmdrB700 OClntCon 0388 Server ended.
20160131.223540.260 r9999I infwB700 OClntCon 0173 InfoService ended.
20160131.223556.378 r9999I tick090F OApp     1215 SHUTDOWN
20160131.223556.378 r9999I tick090F OModel   2344 informing 31 listeners of a system event name=sys val=shutdown...
20160131.223556.379 r9999I tick090F OApp     1224 Informing clients...
20160131.223556.583 r9999I tick090F OApp     1237 Informing model...
20160131.223556.583 r9999s tick090F OModel   2756 Saving plan [/home/peter/rocrail/aktuell.xml]...
20160131.223556.734 r9999I tick090F OModPlan 1274 Serialized Loc List=46338
20160131.223556.757 r9999I tick090F OModPlan 1251 46338 bytes saved in /home/peter/rocrail/loco.xml.
20160131.223556.881 r9999I tick090F OModel   2796 Serialized Plan=41976
20160131.223556.900 r9999I tick090F OModel   0330 backup /home/peter/rocrail/aktuell.xml to backup/20160131223556900-aktuell.xml
20160131.223556.917 r9999I tick090F OModel   0361 41976 bytes saved in /home/peter/rocrail/aktuell.xml.
20160131.223556.917 r9999s tick090F OModel   2801 Plan file saved.
20160131.223556.917 r9999I tick090F OModel   5848 writing occupancy file [occ.xml]
20160131.223556.918 r9999W tick090F OApp     1242 For shutdown in console mode use q<enter>
20160131.223557.775 r9999I phts0981 OPClient 0357 write options 10
20160131.223557.925 r9999I phts0981 OSystem  0564 expdate = 08-05-2016
20160131.223558.067 r9999I phts0981 OPClient 0393 write model plan 88260
20160131.223606.626 r9999I phts0981 OPClient 0357 write options 10
20160131.223606.755 r9999I phts0981 OSystem  0564 expdate = 08-05-2016
20160131.223606.904 r9999I phts0981 OPClient 0393 write model plan 88260

In den Zeilen 212 und 213 steht, dass der Rocweb-Manager gestartet wurde. Ich kann leider nicht erkennen, wo da etwas schief läuft.



hermannk wrote:wenn auf dem Web-Browser sich keine Änderungen anzeigen, obwohl man doch die Konfiguration geändert hat, dann liegt es gerne an dem Cache des Web-Browsers. Ich musste nach jeder Konfigurations-Änderung den Cache von Safari auf meinem Mac löschen.

Cache habe ich auch gelöscht, keine Verbesserung.



Noch eine Frage zu meinem Screenshot einen Beitrag früher. Ist bei Euch dort die RocRail-Version eingetragen?
Sincerely, Peter


I like the active participation in patchwork model railroading, layouts that are built up by several teammates quickly for a short time.
Peter Mueller
 

Re: kein Gleisplan und keine Lokomotiven

Postby Pirat-Kapitan » 01.02.2016, 00:47

Hi Peter,
Hast Du ggf. unkorrekte Pfade in der Rocweb-Konfiguration eingetragen?
Das hatte ich am Anfang auch ml bei Deiner Beschreibung ( nut Titelzeile).

Schoene Gruesse
Johannes
Clearasilfahrer auf Spur G&H0m, Lenz LZV (3.6), ORD-20, Manhart-Funki und WLM, RS-Bus Rückmelder (Reedkontakte/GBM),
Rocrail auf RasPi mit mobilen Geräten (andRoc). Details auf http://wiki.rocrail.net/doku.php?id=use ... at-kapitan.
Pirat-Kapitan
 

Re: kein Gleisplan und keine Lokomotiven

Postby hermannk » 01.02.2016, 06:52

Moin Peter,
mir ist da noch was ganz Kurioses eingefallen:
- als ich zum ersten Mal deinen Plan auf meinem kleinen 13 Zoll Bildschirm geöffnet habe, war da eine grosse weisse Fläche zu sehen.
Löung: das erste Gleis-Element ist ganz weit rechts und weit unten angeordnet.
Ich habe den Zoom auf 50% gestellt, um wenigstens beim Starten schon ein wenig von dem Gleisplan zu sehen.

Eventuell musst du auch erst auf deinem Rocweb-Client weit scrollen, um etwas zu sehen.

Prüfung: lege irgend etwas Unnötiges (z.B. einen Text) in die linke obere Ecke des Plans. Das sollte dann immer beim Start auf dem Rocweb-Client zu sehen sein.
Es grüßt von der Ostsee der Hermann
[Spur N] [Mac OS X] [Raspberry Pi 2 B] [OpenDCC GBM-Master, GBM16T] [OneControl + BiDiBone] [Rocweb]
hermannk
 

Re: kein Gleisplan und keine Lokomotiven

Postby Peter Mueller » 01.02.2016, 13:28

hermannk wrote:Prüfung: lege irgend etwas Unnötiges (z.B. einen Text) in die linke obere Ecke des Plans. Das sollte dann immer beim Start auf dem Rocweb-Client zu sehen sein.
Es grüßt von der Ostsee der Hermann

Danke, es liegt an meinem Gleisplan - oder anders ausgedrück, mit dem Demo-Plan funktioniert es jetzt zumindest von meinem Windows-PC aus. Jetzt muss ich nur noch das Gleiche mit meinem Linux-Laptop an der Zentrale probieren.

Nachtrag: vom Laptop unter Linux klappt es grundsätzlich auch. Ein paar Sachen sind anders, Zentrale aus- und einschalten klappt nicht, aber grundsätzlich besteht jetzt eine Verbindung. Für den Rest habe ich heute Abend erst Zeit - oder nächstes Wochenende. Die "plan.xml" unter Linux ist eine andere wie die unter Windows. Hat mich auch wieder durcheinander gebracht.
Last edited by Peter Mueller on 01.02.2016, 13:50, edited 2 times in total.
Sincerely, Peter


I like the active participation in patchwork model railroading, layouts that are built up by several teammates quickly for a short time.
Peter Mueller
 

Re: kein Gleisplan und keine Lokomotiven

Postby LDG » 01.02.2016, 13:48

Hallo Peter,

Rocview ignoriert kleinere Fehler im XML des Plans, aber die Browserlösung benötigt einen absolut fehlerfreien Plan. Manche Browser sind da "zickiger" als Andere :roll:

Vielleicht mal mit
"Datei / Analysieren / Plankonsistenz prüfen"
und danach
"Datei / Analysieren / Erweiterte Plankonsistenzprüfung"
versuchen alle gemeldeten Problemchen (auch Warnungen und Hinweise) zu eliminieren.

Vielleicht kannst Du auch mal Deine aktuelle Rocrail-Umgebung (Konfig+Plan+Loks, ggf.via Hilfe/Problemfall als ZIP) hier zur Verfügung stellen. Dann können auch die "Spezialisten" nach der Ursache suchen :wink:

Gruß,
Lothar
LDG
Site Admin
 

Re: kein Gleisplan und keine Lokomotiven

Postby Peter Mueller » 01.02.2016, 13:59

LDG wrote:Vielleicht kannst Du auch mal Deine aktuelle Rocrail-Umgebung (Konfig+Plan+Loks, ggf.via Hilfe/Problemfall als ZIP) hier zur Verfügung stellen. Dann können auch die "Spezialisten" nach der Ursache suchen :wink:

Ich bin kein "Power-User", sondern brauche eigentlich nur ein Gleisbildstellpult und die Möglichkeit, eine Lokliste zu verwalten und über WLAN auf mobilen Endgeräten nutzbar zu machen.

Ich habe mich aber irgendwann vor vielen Jahren durch Aktionen und Fahrstraßen gearbeitet - mittlerweile alles wieder vergessen - und nutze heute noch die Programmzeilen, die ich damals quasi als funktionierende "Unterprogramme" erstellt habe. Ich kopiere sie in neue Pläne und passe sie an, ohne den Zusammenhang noch präsent zu haben. Das ändere ich jetzt, arbeite mich neu dadurch, dauert aber seine Zeit. Erschwerend kommt hinzu, dass ich mich allmählich in Linux einarbeiten möchte. Also zwei Baustellen gleichzeitig :wink:.

Allen geduldigen Helfern noch einmal vielen herzlichen Dank.
Sincerely, Peter


I like the active participation in patchwork model railroading, layouts that are built up by several teammates quickly for a short time.
Peter Mueller
 


Return to Rocweb (DE)