Hello - bonjour

New users can introduce themself here

Hello - bonjour

Postby ademes » 07.12.2017, 17:52

Hi everybody,
I'm happy to be accepted in this forum as I'm completely new in RocRail.
I'm leaving in Belgium (Brussels) and my motherlanguage is french. However, I really like english too :wink: and even flemmish :?
My project is to implement a layout in the "Z" scale, in digital, of course. Currently I've 5 engines already digitalized and the sixth one will be transfomed very soon (I just need time and quite).
I also will connect my real layout to RocRail on a PC with Windows 10 and 3D Train Studio.
I will surely need your help in these objectives.
Regards
Ademes

Bonjour tout le monde,
Je suis heureux d'être accepté dans ce forum, étant donné que je suis complètement nouveau dans RocRail.
J'habite à Bruxelles, en Belgique et je suis francophone. Mais j'aime aussi l'anglais et même le flamand :wink:
Mon projet est d'implémenter un réseau au format "Z", en digital bien entendu! Actuellement, 5 locos sont digitalisées et la sixième le sera bientôt (juste du temps et du calme).
Je vais connecter mon réseau réel à RocRail sur un PC sous Windows 10 et aussi à 3D Trin Studio.
J'aurai besoin de votre aide pour ces projets.
Cordialement
Ademes
ademes
 

Re: Hello - bonjour

Postby ademes » 10.12.2017, 18:23

Hello
I suppose that my 1st msg may be suppressed, is'nt it? As I currently receive a lot of answer in french.
Regards
André
ademes
 

Re: Hello - bonjour

Postby cds » 10.12.2017, 18:28

Hello!

Welcome to RR!

Why do you think your message is suppressed?
Beste Grüße/Kind regards
Claus

M* H0 M
HW: TAMS MC, B-2 & B-4, WD-34, VIESSMANN 5211(1), LITTFINSKY & TAMS S88-3
Decoder: Mä & TAMS (MM2)
SW: Win7 64, RR 64, andRoc
cds
 

Re: Hello - bonjour

Postby smitt48 » 10.12.2017, 18:58

Hi Andre,

Welcome to Rocrail.
Maybe because you are writing in French in the English forum?!
Je ne parle pas francais, maar wel nederlands. :mrgreen:

Tom
Kind regards,
Tom Smit
Kralendijk, Bonaire - Dutch Caribbean

Märklin M & K-rails with ECoS2 (4.2.2) - Win10
RoSoft: S88n & WDD switch & SDD signal decoders
Display: Tri-ang from 1950's, Märklin from early 1960's
In build phase
smitt48
 

Re: Hello - bonjour

Postby ademes » 11.12.2017, 14:23

Hi,
First of all... Sorry for french in the english forum. The reason was that, at that moment, I did'nt realise that a french forum still exists.
As already said, I'm new in the rocrail world and I have some questions :
1. why does the demo plan not start when I open the standard workspace.
2. What is the difference, at the installation time, between WIKI plan and demo plan?
3. Are there some parameters to highlight when (trying) starting the demo plan?

Many thanks in advance
Regards
André
ademes
 

Re: Hello - bonjour

Postby smitt48 » 11.12.2017, 15:06

Hi Andre,

1. You have to load a plan first described here.
2. the plans are different, the wiki plan is the same one described in the wiki, the demo plan is more of a railroad.
demo03.PNG

Demo plan
The Demo/wiki plan is in the following directory.
demo01.PNG


Start Rocrail and select:
File-> Open Workspace. Select the directory (called Rocrail) from the previous picture. (It should be the same on your Win machine)
demo02.PNG


Select Folder, this loads the plan in Rocrail.
(The second time you want to load this plan use the recent workspaces option.

Turn on Automode and find a loc, right mouse click and start loco. Click on the sensors and the train moves to a new block. etc.

Tom
You do not have the required permissions to view the files attached to this post.
Kind regards,
Tom Smit
Kralendijk, Bonaire - Dutch Caribbean

Märklin M & K-rails with ECoS2 (4.2.2) - Win10
RoSoft: S88n & WDD switch & SDD signal decoders
Display: Tri-ang from 1950's, Märklin from early 1960's
In build phase
smitt48
 


Return to Introduction