CS2 update 1.6.4 - S88 problems in Rocrail

Moderator: Moderators

CS2 update 1.6.4 - S88 problems in Rocrail

Postby LucioTS » 20.09.2011, 18:46

Hello,
is available an update for the CS2.
The new version is the 1.6.4
After installed the update, Rocrail don't recive any informations from S88.

In the CS2, is available a new windows (under setting) to controlthe time and the frequency of S88 modules but nothing of the possible combinations works with rocrail (last release available a t today).

Any suggestion?

Thanks

Lucio
LucioTS
 

Postby rjversluis » 20.09.2011, 19:29

Hi,

as you can read in other threads, the s88 messages from the CS2 are not documented and there for re-engineerd.
http://forum.rocrail.net/viewtopic.php?t=3122
http://wiki.rocrail.net/doku.php?id=cs2 ... ck_support

Every upgrade of the firmware can cause incompatibility with Rocrail regarding the s88 messages.
Please ask the manufacturer of the CS2 for documentation of the s88 messages so we can implement it properly.

[EDIT]
Or just use the previous working firmware. And send your complains to the manufacturer. (Märklin?)
Last edited by rjversluis on 21.09.2011, 06:09, edited 1 time in total.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Postby teddych » 21.09.2011, 06:08

Hi Lucio
Hi Rob

In the CS2-settings under CAN-Gatway you have to choose "broadcast" instead of auto and as IP you have to insert the IP of your PC/Notebook. Then it works again. Do not forget to restart everything.

Teddy
__________________________
LED an Wechselstrom
teddych
 

Postby Apsara » 21.09.2011, 07:56

teddych wrote:Hi Lucio
Hi Rob

In the CS2-settings under CAN-Gatway you have to choose "broadcast" instead of auto and as IP you have to insert the IP of your PC/Notebook. Then it works again. Do not forget to restart everything.

Teddy
__________________________
LED an Wechselstrom


For me this change of the setting "auto" -> "broadcast" is working very well!

Frank
Windows 10, jeweils aktuellste Rocrail-Version
Märklin C-Gleis, K-Gleis, M-Gleis...
CS2 v 4.2.1
RM mit Gleisreporter und Stromsniffer (CDB) und LDT RM-GB-8-N, HSI-88
Apsara
 

Postby LucioTS » 21.09.2011, 13:49

Hi Teddy,

Many thanks :D .
I changed the CAN parameters as your indication and now all is working.

Bye.
LucioTS
 


Return to ECoS - Marklin CS1