(operator error) Analyser changes

(operator error) Analyser changes

Postby smitt48 » 15.10.2017, 13:40

Hi,

Lothar created a "route change log" a while back, which showed the changes in routes, which were generated in the analyser.
I noted that this "change log" is gone, can it be re-instated?

Thanks Tom
Last edited by smitt48 on 15.10.2017, 14:23, edited 1 time in total.
Kind regards,
Tom Smit
Kralendijk, Bonaire - Dutch Caribbean

Märklin M & K-rails with ECoS2 (4.2.0) - WinXP as server, 10
RoSoft: S88n & WDD switch & SDD signal decoders
Display: Tri-ang from 1950's, Märklin from early 1960's
In build phase
smitt48
 

Re: Analyser changes

Postby LDG » 15.10.2017, 14:10

Hi Tom,

the "route change log" is still there and works as expected ("autogen-"routes with different names are reported):
copyied from Rocview's server trace window wrote:15:06:48 Please restart Rocrail server.
15:06:48 route generator (re)created routes (54 -> 54)
15:06:47 Please restart Rocrail server.
15:06:47 route generator ADDED route[autogen-[A1-]-[B5+]]
15:06:47 route generator REMOVED route[autogen-[A1-]-[B5+]_old_route]
15:06:46 Connector test: no errors detected
15:06:46 Connector test: in progress...


Regards,
Lothar
LDG
Site Admin
 

Re: Analyser changes

Postby smitt48 » 15.10.2017, 14:19

Hi Lothar,

Good, I liked that feature.
Well that is weird, I added a new block to the layout. It generated the Routes, but it did not show which ones.
I will be watching it :shock: :coffee:

Thanks Tom
Kind regards,
Tom Smit
Kralendijk, Bonaire - Dutch Caribbean

Märklin M & K-rails with ECoS2 (4.2.0) - WinXP as server, 10
RoSoft: S88n & WDD switch & SDD signal decoders
Display: Tri-ang from 1950's, Märklin from early 1960's
In build phase
smitt48
 

Re: Analyser changes

Postby smitt48 » 15.10.2017, 14:23

Hi Lothar,

The coffee helped :shock:
It is further down the server window :oops:

Thanks Tom
Kind regards,
Tom Smit
Kralendijk, Bonaire - Dutch Caribbean

Märklin M & K-rails with ECoS2 (4.2.0) - WinXP as server, 10
RoSoft: S88n & WDD switch & SDD signal decoders
Display: Tri-ang from 1950's, Märklin from early 1960's
In build phase
smitt48
 


Return to General