scroll-bar

Moderator: Moderators

scroll-bar

Postby Buddace » 02.03.2010, 01:46

Can show scrollbar ever time ? My current layout isn't small and I can't see if scale factor is more than 10%.
display cut bottom without scrollbar.
www.dccworld.com First and Only Italian DCC Website.

TMWDCC/TBX , zDCC, Lokmaus 2, Arnold DCC, Intellibox, Hornby Select, A lot of Loconet DIY (Loconet SwitcBoard, Loconet P50, etc..)
Buddace
 

Postby Buddace » 03.03.2010, 09:49

Try to explain..look attachment....bottom is cut :)
You do not have the required permissions to view the files attached to this post.
www.dccworld.com First and Only Italian DCC Website.

TMWDCC/TBX , zDCC, Lokmaus 2, Arnold DCC, Intellibox, Hornby Select, A lot of Loconet DIY (Loconet SwitcBoard, Loconet P50, etc..)
Buddace
 

Postby rjversluis » 03.03.2010, 10:33

Hi,

the solution for this is just under your fingers:
http://wiki.rocrail.net/doku.php?id=roc ... _plan_size
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Postby Buddace » 03.03.2010, 13:36

rjversluis wrote:Hi,

the solution for this is just under your fingers:
http://wiki.rocrail.net/doku.php?id=roc ... _plan_size

I changed size 64*200---last module Y=91 but don't work, plan is cut
www.dccworld.com First and Only Italian DCC Website.

TMWDCC/TBX , zDCC, Lokmaus 2, Arnold DCC, Intellibox, Hornby Select, A lot of Loconet DIY (Loconet SwitcBoard, Loconet P50, etc..)
Buddace
 

Postby rjversluis » 03.03.2010, 13:46

You are right.

It is not used for modular layouts at this moment; Tonight it will.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Postby rjversluis » 03.03.2010, 17:17

Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Postby Buddace » 04.03.2010, 16:21

Work! thanks :)
www.dccworld.com First and Only Italian DCC Website.

TMWDCC/TBX , zDCC, Lokmaus 2, Arnold DCC, Intellibox, Hornby Select, A lot of Loconet DIY (Loconet SwitcBoard, Loconet P50, etc..)
Buddace
 

Postby rjversluis » 04.03.2010, 17:31

OK,

now you only need a haircut and then you are ready for the exhibition. ;-)
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Postby Buddace » 08.03.2010, 16:20

rjversluis wrote:OK,

now you only need a haircut and then you are ready for the exhibition. ;-)

Hairycut? LOL my hairy are too crazy....every time!
So I tested during exhibition, around 60 linear meters of track:
http://cv19.altervista.org/4images/cate ... =21&page=1
I tried two schedule but find a problem in route definition for modular....wait for explain (I have to test with virtual command station in home pc).
Next exhibition will be June but with reduced layout.
www.dccworld.com First and Only Italian DCC Website.

TMWDCC/TBX , zDCC, Lokmaus 2, Arnold DCC, Intellibox, Hornby Select, A lot of Loconet DIY (Loconet SwitcBoard, Loconet P50, etc..)
Buddace
 

Postby Buddace » 08.03.2010, 16:22

Another Info. During exhibition I met a lot of people ask me information about Rocrail :)
www.dccworld.com First and Only Italian DCC Website.

TMWDCC/TBX , zDCC, Lokmaus 2, Arnold DCC, Intellibox, Hornby Select, A lot of Loconet DIY (Loconet SwitcBoard, Loconet P50, etc..)
Buddace
 


Return to Modular Layout Support

cron