[closed]Does DDX still support POM with ORD1 ?

Moderator: Moderators

[closed]Does DDX still support POM with ORD1 ?

Postby bbernhard » 24.01.2015, 14:07

Hi there

I use an ORD1 since several years and it had worked fine for me all the time. Programming was always done withPT track which works fine as well.
Now with all the BBT trial runs I played around with POM first time.
Unfortunatelly I am not able to write any CV. Neither with the Loco tab nor with RocPro

Power is ON. PT Track is OFF. POM checkbox is ON.
Everytime I try to write a CV, the track power automatically switch OFF (controlled with oscilloscope)and thats it. Nothing else happens.
If I reread the CV at the PT track i can see that there was no change.

I do not use BIDI. Only DCC is enabled in the DDX settings tab. Only ZIMO and CT Electronic decoders are in use.

I do not know if this had ever worked for me. But as far as I understand POM commands are the same like all other DCC packets.
So I do not suspect any hardware or Windows issue.

Any clue what might be wrong ?
thx and best rgds
bb
Last edited by bbernhard on 04.02.2015, 19:54, edited 1 time in total.
HO Scale mostly from Kleinbahn and Roco -
OpenDCC GBMBoost, LightControl, TLE-S88-Bridge, LDT and some DiY stuff, Win10
bbernhard
 

Re: Does DDX still support POM with ORD1 ?

Postby rjversluis » 24.01.2015, 14:28

If you only are interested in DCC without a programming track support I can only advice you to swap DDX for DCC232.
Excepts for bugs I do no longer maintain DDX.
I use DCC232 in combination with RocNetNode and ORD3.
POM works just fine.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Re: Does DDX still support POM with ORD1 ?

Postby bbernhard » 24.01.2015, 21:49

Hi

Yes I have already read that there is no more support for ORD1. Therefore I do not reqest to spend any effort for this issue.
The question was just placed to understand if i made something wrong, or if this is a known limitation.

For myself Iam still happy with his thing so there is no major reason to use something else.

br
bb
HO Scale mostly from Kleinbahn and Roco -
OpenDCC GBMBoost, LightControl, TLE-S88-Bridge, LDT and some DiY stuff, Win10
bbernhard
 

Re: Does DDX still support POM with ORD1 ?

Postby bbernhard » 04.02.2015, 19:54

Hi all
Stefan from German Forum told me that he has exactly the same issue with DDX and ORD 1.
So i guess we can consider there is any old bug.

However we understand this is outdated and therefore we do not request a fix.

best rgds
bb
HO Scale mostly from Kleinbahn and Roco -
OpenDCC GBMBoost, LightControl, TLE-S88-Bridge, LDT and some DiY stuff, Win10
bbernhard
 


Return to ddx