ORD-3 Common Ground

RocNet(RaspberryPi), mergCBUS and LocoNet based hardware developed by Peter Giling. (GCA)
Documentation: http://wiki.rocrail.net/doku.php?id=english#hardware
Order information: http://wiki.rocrail.net/doku.php?id=gca:gca-index-en/

ORD-3 Common Ground

Postby Merdeka » 12.02.2015, 22:08

Hi,

Quick question: When using an ORD-3 Booster. Does it need a common ground. I'm talking about the track connections not the transformer.
I know that the 2 wires from the transformers may only be connected to the device they are powering.

Example 1:
Intellibox with ORD-3 on the Loconet-B. Do I need to connect the brown track connections together?

Example 2:
Multiple ORD-3 boosters. Do I need to connect the brown track connections together?

Cheers,

Timo
Merdeka
 

Re: ORD-3 Common Ground

Postby Merdeka » 17.02.2015, 08:39

Looks like I finally found the answer.

But i'll update the post so other can benefit.

The ORD-3 used an L6203 which is an H-Bridge. H-Bridge Boosters may not have their ground connected together.

Typically there are 2 booster designs:

- H-Bridge commonly used with DCC (grounds not connected)
- Common Ground Booster used primarily for Motorola/Marklin.

It is not advised to use the two designs together in one layout.

Cheers,

Timo
Merdeka
 


Return to GCA (Hardware by Peter Giling)