The statistics on z21 and GBM16XN.

The statistics on z21 and GBM16XN.

Postby andrey » 03.09.2017, 10:05

Hi. Can anyone tell me how the Work is "Statistics" on z21 and GBM16XN?
http://wiki.rocrail.net/doku.php?id=sensor-statistic-en
andrey
 

Re: The statistics on z21 and GBM16XN.

Postby rjversluis » 03.09.2017, 10:53

Hi Andrey,

as you can read in the Wiki:

Supported Command Stations:
BiDiB GBMBoost Master
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Re: The statistics on z21 and GBM16XN.

Postby andrey » 31.12.2017, 08:16

The information is already outdated. Latest news
http://wiki.rocrail.net/doku.php?id=sensor-statistic-en
Happy New year to all!
andrey
 

Re: The statistics on z21 and GBM16XN.

Postby andrey » 02.01.2018, 17:52

The table, which reflects the functions RailCom needed to work with the above words. Perhaps this information is already somewhat outdated. https://www.opendcc.de/info/railcom/rai ... rview.html
andrey
 

Re: The statistics on z21 and GBM16XN.

Postby andrey » 05.01.2018, 13:37

The Statistics function is now available for the Z21 and in the "Properties" Block. But it is not clear whether this feedback with RailCom or simply locomotive decoders with QoS ( RailCom)?
http://wiki.rocrail.net/doku.php?id=block-statistics-en
andrey
 

Re: The statistics on z21 and GBM16XN.

Postby rjversluis » 05.01.2018, 13:43

The loco decoder must set to send info on Railcom channel 2 and the reader must be able to read and report it.
Just check the Rocrail server trace...
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Re: The statistics on z21 and GBM16XN.

Postby andrey » 07.01.2018, 19:06

Hallo, Rob haben Sie eine Beschreibung auf der Software-Ebene der Realisierung von QoS-Funktionen in Lokomotiven Decoder (ZIMO)?
andrey
 

Re: The statistics on z21 and GBM16XN.

Postby peter&basti » 07.01.2018, 21:14

Hi Andrey,

regarding your question about ZIMO Documentation:

The Railcom QoS Feedback was implemented by ZIMO e.g. with SW Release 31.57 as of 2015-06-24 for "small" decoders MX618, MX620-MX623, MX630-MX633. For other Decoder types please refer to the ZIMO Web http://www.zimo.at/web2010/support/Deco ... Update.htm

This feature is not documented within the ZIMO User manuals, because this is a standard feature of railcom.

In case this QoS Feature does not work with your ZIMO Decoders:

- check your Decoder SW Release, if not fit then update necessary
- in any case Railcom shall be activated in the CV-Setting, see manual http://www.zimo.at/web2010/documents/MX ... oder_E.pdf
Liebe Grüße / best regards
Peter


System: DCC 2-Leiter H0, Rocrail 64bit auf Win10 Pro 64
Traktion: OpenDCC GBM
Fahrweg: RocNetNode & GCA PI01/2/3, GCA41/Arduino RFID, GCA145 Drehscheibe, etc.
Decoder: 99% Zimo
Experimentell: MQTT & Node-Red
peter&basti
 

Re: The statistics on z21 and GBM16XN.

Postby andrey » 08.01.2018, 06:03

Hallo Peter. Vielen Dank für die ausführliche Antwort
andrey
 


Return to Wiki