The Analyser -> Auto Route Creation

Postby andre0604 » 09.10.2010, 18:59

Hi,

here are some more infos about my window crashes. The server only or rocgui only is running. It crashes only if try to run both.

Best regards
Andre
andre0604
 

Postby rjversluis » 09.10.2010, 19:54

Hi Andre,

I started today XP and did try the same as you did.
Guess what?
Everything worked as expected.

No clue what your problem is.
But this is definitely the wrong thread.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Postby gramels » 10.10.2010, 09:29

great feature, thanks a lot
openDCC - MultiMaus - (MERG RFID) - testing a planned garden layout in IIm -
gramels
 

Postby andre0604 » 10.10.2010, 09:48

Hi Rob,

yes it is the wrong thread and no more words about crashes. Rev 2016 is working and I did test this great new feature. Fantastic.

Best regards
Andre
andre0604
 

Postby jeanmichel » 10.10.2010, 12:23

Moin,

from 2020 I activated the so called "strict analyzer". it will do in short the following additional things:

- it will add to all items going from the block to the signal in that direction the blockid. so those items will get red as the block is occupied. because on the layout the train will not stop at the block end but on the signal at IN event.

- with this feature "crossing turnouts can be calculated autmatically. -> this needs to be implemented that a turnout can't be set if it's state is occ.

- it will stop as well analysing the occ on a turnout that has a decistion (coming from the points).

And as allways: please make a backup uf your plan prior testing experimental features!

Have fun!

BR
Jean-Michel
jeanmichel
 

Postby andre0604 » 14.10.2010, 15:05

Hi all,

the Analyser is working but not all possible routes will be generated. My manual setup contains 19 routes but the analyser only found 13 routes. My manual routes are all for one direction and did not contain crossing blocks or connectors. What is the experience of other Rocrailers or maybe I did something wrong?

Best regards
Andre
andre0604
 

Postby jeanmichel » 14.10.2010, 15:12

Hi Andre,

I think it would help if you post your plan here so I can have a look.

BR
Jean-Michel
jeanmichel
 

Postby andre0604 » 14.10.2010, 15:38

Hi Jean Michel,

please find attached my plan. I did edit the plan without testing but hopefully everything is fine. Thanks in advance for having a look.

Best regards
Andre
You do not have the required permissions to view the files attached to this post.
andre0604
 

Postby jeanmichel » 14.10.2010, 16:25

Hi Andre,

your plan allows loops: routes starting and ending at the same block. This is logically not possible. After deleting two tracks to cut the loops it generated this routes:

Code: Select all
20101014.172117.239 r9999I main     OModel   2473 add route autogen-[b8-]-[b1+]
20101014.172117.339 r9999I main     OModel   2473 add route autogen-[b8-]-[b7+]
20101014.172117.439 r9999I main     OModel   2473 add route autogen-[b8+]-[b5-]
20101014.172117.540 r9999I main     OModel   2473 add route autogen-[b8+]-[b6-]
20101014.172117.640 r9999I main     OModel   2473 add route autogen-[b4-]-[b2+]
20101014.172117.740 r9999I main     OModel   2473 add route autogen-[b3-]-[b2+]
20101014.172117.841 r9999I main     OModel   2473 add route autogen-[b1-]-[b8+]
20101014.172117.941 r9999I main     OModel   2473 add route autogen-[b2+]-[b4-]
20101014.172118.041 r9999I main     OModel   2473 add route autogen-[b2+]-[b3-]
20101014.172118.142 r9999I main     OModel   2473 add route autogen-[b5+]-[b8-]
20101014.172118.242 r9999I main     OModel   2473 add route autogen-[b6-]-[b8+]
20101014.172118.342 r9999I main     OModel   2473 add route autogen-[b7+]-[b8-]


this should be all possible, right?

BR
Jean-Michel
jeanmichel
 

Postby jeanmichel » 14.10.2010, 16:35

and: the dcrossings are only crossings so only the ways of a crossing will be analyzed. set them to dcrossing in the properties.

BR
jmf
jeanmichel
 

Postby jeanmichel » 14.10.2010, 16:46

Hi,

after setting the crossings to dcrossing it will find more of course:

Code: Select all
20101014.174405.443 r9999I main     OModel   2473 add route autogen-[b8-]-[b1+]
20101014.174405.544 r9999I main     OModel   2473 add route autogen-[b8-]-[b2+]
20101014.174405.644 r9999I main     OModel   2473 add route autogen-[b8-]-[b7+]
20101014.174405.744 r9999I main     OModel   2473 add route autogen-[b8+]-[b5-]
20101014.174405.845 r9999I main     OModel   2473 add route autogen-[b8+]-[b6-]
20101014.174405.945 r9999I main     OModel   2473 add route autogen-[b4-]-[b2+]
20101014.174406.046 r9999I main     OModel   2473 add route autogen-[b4-]-[b1+]
20101014.174406.146 r9999I main     OModel   2473 add route autogen-[b3-]-[b2+]
20101014.174406.246 r9999I main     OModel   2473 add route autogen-[b3-]-[b1+]
20101014.174406.347 r9999I main     OModel   2473 add route autogen-[b1+]-[b8-]
20101014.174406.447 r9999I main     OModel   2473 add route autogen-[b1+]-[b4-]
20101014.174406.547 r9999I main     OModel   2473 add route autogen-[b1+]-[b3-]
20101014.174406.648 r9999I main     OModel   2473 add route autogen-[b2+]-[b4-]
20101014.174406.748 r9999I main     OModel   2473 add route autogen-[b2+]-[b3-]
20101014.174406.848 r9999I main     OModel   2473 add route autogen-[b2+]-[b8-]
20101014.174406.949 r9999I main     OModel   2473 add route autogen-[b5+]-[b8-]
20101014.174407.049 r9999I main     OModel   2473 add route autogen-[b6+]-[b8-]
20101014.174407.149 r9999I main     OModel   2473 add route autogen-[b7+]-[b8-]


I added a filter for the "loop routes" (rev 2070) if your version is < 2070 it will find them as well ...

BR
jmf
jeanmichel
 

Postby andre0604 » 14.10.2010, 16:57

Hi Jean Michel,

thanks for your fast reply and good hints. I will change the propertie for the crossings and I expect that all routes will be generated then. Maybe in future the Analyser can automatically check for loops.

Just saw your note about Rev 2070 :D

Best regards
Andre
andre0604
 

Postby andre0604 » 14.10.2010, 17:18

Hi Jean Michel,

I compared my manual routes with your automatically generated routes and now there is only the route B7 to B6 missing. Only like to inform you because I think it is working very well now.

Best regards
Andre
andre0604
 

Postby rjversluis » 14.10.2010, 17:26

Hi,

Jean-Michel is a good analyzer builder and brings Rocrail to the top. :D
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Postby jeanmichel » 14.10.2010, 18:27

Hi Andre,

it can't find a route from b7 to b6 because of the dir-item left of b6. excahnage it with a straight track and everythig works as expected.

BR
Jean-Michel
jeanmichel
 

PreviousNext

Return to Announcements