[Solved] SPROG: Serial device error "ioctl fionread"

http://www.sprog-dcc.co.uk/

[Solved] SPROG: Serial device error "ioctl fionread"

Postby agre30 » 05.01.2014, 21:17

I receive this error with a locomotive on a simple oval piece of track I use for programming and testing the decoder.
The error appears when I make the locomotive run faster. When it appears I have no longer control over the locomotive.
I've tested with 2 different locomotives, the zip file is from one error.
I have one CS connected, SprogIIV3.
You do not have the required permissions to view the files attached to this post.
Last edited by agre30 on 23.02.2014, 11:36, edited 1 time in total.
Albert,
Märklin 3-rail
Lubuntu 16.04 (server and client) / TamsMC - Booster B-2 / HSI88 / S88N
Stoom / steam / dampf / diesel / E-loc
agre30
 

Postby rjversluis » 06.01.2014, 08:23

The device driver has gone.
CHeck this:
http://wiki.rocrail.net/doku.php?id=faq-en#usb
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Postby agre30 » 06.01.2014, 18:33

Hi Rob,
Thanks. I will take a closer look at the place of the USB cable and sprog.
Will the drivers be restored at reboot?
Albert,
Märklin 3-rail
Lubuntu 16.04 (server and client) / TamsMC - Booster B-2 / HSI88 / S88N
Stoom / steam / dampf / diesel / E-loc
agre30
 

Re: SPROG: Serial device error "ioctl fionread"

Postby agre30 » 23.02.2014, 11:36

Problem solved. After all I found out the problem was noth with the sprog but with the mouse. I connected another mouse and now everything works fine.

Regards,
Albert.
Albert,
Märklin 3-rail
Lubuntu 16.04 (server and client) / TamsMC - Booster B-2 / HSI88 / S88N
Stoom / steam / dampf / diesel / E-loc
agre30
 


Return to sprog