[erl.] BiDiB RF-Basis in Rocrail unterstützt !

http://www.opendcc.de
http://www.bidib.org

Re: BiDiB RF-Basis in Rocrail unterstützt !

Postby rjversluis » 15.05.2017, 06:28

Bergi wrote:@Rob, am I right to assume that this is a new sensor type?

no, just regular.
We already did use this with the Pi05.
The loco had its own RFID reader and scanned the tags between the tracks.
Best Regards, Rob.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Re: BiDiB RF-Basis in Rocrail unterstützt !

Postby rjversluis » 15.05.2017, 10:30

Bergi wrote:Hi,
Aleksey wrote:The problem is that the program from the car decoder does not receive the sensor status "off"
That's true, but I'd say it's by design. The program only receives "car decoder is now at position XY", and the next time "car decoder is now at position YZ". So you could query which point the car met last.

Other system reports arrival and depart, like transponders in LocoNet.
Best Regards, Rob.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Re: BiDiB RF-Basis in Rocrail unterstützt !

Postby Aleksey » 15.05.2017, 14:16

rjversluis wrote:Hi Aleksey,

I corrected the behaviour of the timer.


Hello!
Ok, it's working fine.
Thank you, Rob.
Sorry for my English. I use Google translator
HO, OpenDCC, GBMBoost, GBM16T, ORA decoders, OpenCar System(BiDiB-RF-Basis, IRM, OpenCar Decoder V3)
Aleksey
 

Re: BiDiB RF-Basis in Rocrail unterstützt !

Postby rjversluis » 15.05.2017, 14:26

Hi Aleksey,

can we close this thread, or are there more unsupported RF-Basis messages?
Best Regards, Rob.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Re: BiDiB RF-Basis in Rocrail unterstützt !

Postby Aleksey » 15.05.2017, 17:38

rjversluis wrote:Hi Aleksey,

can we close this thread, or are there more unsupported RF-Basis messages?


Hi, Rob!
Probably the topic can be closed, but I can not decide this, because this is not my topic.

P.S. I have a proposal that relates to information messages about the state of the battery.
It may be possible to add in the properties of cars, an option to enter a critical value for this parameter.
When receiving such a value from the decoder of the car, the program would automatically perform an action (what kind of action - this issue is worth discussing) or at least singled out this car, in a certain way in the list, on the locomotive panel.
1.png


Or the display of the car picture on the block would change. Also the program could automatically reset the destination of such a car in the block and discard the routes that are assigned to this car.

Maybe it's worth making a separate table for cars(autos), rather than keeping them together with the locomotives.
You do not have the required permissions to view the files attached to this post.
Sorry for my English. I use Google translator
HO, OpenDCC, GBMBoost, GBM16T, ORA decoders, OpenCar System(BiDiB-RF-Basis, IRM, OpenCar Decoder V3)
Aleksey
 

Re: [erl.] BiDiB RF-Basis in Rocrail unterstützt !

Postby rjversluis » 16.05.2017, 07:07

Hi Aleksey,

I implemented this.
Best Regards, Rob.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Re: [erl.] BiDiB RF-Basis in Rocrail unterstützt !

Postby rjversluis » 16.05.2017, 11:05

I also added energy state for actions:
http://wiki.rocrail.net/doku.php?id=act ... #sub_state

high > 75%
middle >= 40%
low < 40%
Best Regards, Rob.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Re: [erl.] BiDiB RF-Basis in Rocrail unterstützt !

Postby Aleksey » 16.05.2017, 19:20

rjversluis wrote:I also added energy state for actions:
http://wiki.rocrail.net/doku.php?id=act ... #sub_state

high > 75%
middle >= 40%
low < 40%

rjversluis wrote:Hi Aleksey,

I implemented this.


Hello, Rob!
It's wonderful, thank you very much for promptly resolving the issues. I will try these functions in the work.

The truth begins the season of barbecue and country construction.
Therefore, it is becoming more difficult to get to the layout. :-(
Sorry for my English. I use Google translator
HO, OpenDCC, GBMBoost, GBM16T, ORA decoders, OpenCar System(BiDiB-RF-Basis, IRM, OpenCar Decoder V3)
Aleksey
 

Previous

Return to OpenDCC-BiDiB (DE)