ricominciamo da capo

Re: ricominciamo da capo

Postby andez8 » 01.09.2016, 16:03

hello Tom,
it's all right, anyway thanks,
my best regards, andrea
andez8
 

Re: ricominciamo da capo

Postby andez8 » 01.09.2016, 19:01

hello Tom,
my central station is like Roco (but better)
it's all right, anyway thanks,
my best regards, andrea
andez8
 

Re: ricominciamo da capo

Postby andez8 » 01.09.2016, 19:05

ciao di nuovo,
questo tracciato è un estratto (una semplificazione) di quello completo
giusto per provare e veder girare i treni
un saluto, andrea
You do not have the required permissions to view the files attached to this post.
andez8
 

Re: ricominciamo da capo

Postby eroncelli » 04.09.2016, 06:46

Usa sempre la funzione "issue": solo così possiamo vedere il tuo sistema !!
http://wiki.rocrail.net/doku.php?id=issue-it
HO Maerklin, CS2+MS2, PC with Win10, Android phone, electronics by IEK, decoder by Maerklin-ESU-TAMS
".. and let your dog enjoy Rocrail"
eroncelli
 

Re: ricominciamo da capo

Postby andez8 » 08.09.2016, 16:39

ciao,
dopo varie correzzioni / aggiustamenti e variarioni il plan9 (ovvero il tracciato completo) sembra funzionare. !!!
almeno nella modalità semiautomatica, ovvero : imposta destinazione ed avvia loco (da blocco a blocco);
ho fatto tanti tentativi ma non ho ancora capito bene come funzionano i blocchi + e - (inverti senso)
bhé un passo avanti lo ho fatto e vi ringrazio
saluti andrea
andez8
 

Re: ricominciamo da capo

Postby eroncelli » 08.09.2016, 21:40

Vediamo il senso dei blocchi (ovvero il + ed il -)
Poniamo che il blocco abbia 2 sensori (A e B): per saper quale dei 2 deve fungere da "enter" devi sapere da che parte si entra nel blocco e quindi ecco il senso del +/-.
Tutto qui, solo questione di logica (è un computer).
HO Maerklin, CS2+MS2, PC with Win10, Android phone, electronics by IEK, decoder by Maerklin-ESU-TAMS
".. and let your dog enjoy Rocrail"
eroncelli
 

Re: ricominciamo da capo

Postby andez8 » 24.09.2016, 08:24

ciao eroncelli, ciao Tom,
ieri sera, non so per quale motivo,
sul circuito basso del mio layout (quello non in salute e postato quì,
ha funzionato tutto.! ! !
era uno spettacolo vedere i treni arrivare e partire ed incrociarsi senza problemi.
grazie a tutti, andrea
andez8
 

Re: ricominciamo da capo

Postby andez8 » 25.09.2016, 05:31

ciaa a tutti duìi nuovo,
scuasate se vi disturbo ancora.
cosa significano queste scritte in rosso che mi da "analyrer"?

06:20:22 analyzer skipped see previous lines.
06:20:22 This plan is not healthy.
06:20:22 Plan is NOT healthty. See previous ERROR lines.
06:20:22 zlevel check: 257 problems
06:20:22 zlevel check: 3 warnings
06:20:22 ERROR: visible item[tx] id[tx20091226185858710] on invalid z level [1]
06:20:22 ERROR: visible item[tx] id[tx20081228230323712] on invalid z level [5]
06:20:22 ERROR: visible item[tk] id[tk20080215180130920] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180129029] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180128528] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180128897] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180127096] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180126475] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180126644] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180125783] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180124951] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180123461] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180122329] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180122618] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180121927] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180120986] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180119435] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180119914] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180118383] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180117721] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180116970] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180115868] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180114907] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180113306] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180112315] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180112784] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180111923] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180110272] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180110791] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180109320] on invalid z level [1]
06:20:21 ERROR: visible item[tk] id[tk20080215180109810] on invalid z level [1]
06:20:21 ERROR: visible item[tk] id[tk20080215180108259] on invalid z level [1]
06:20:21 ERROR: visible item[tk] id[tk20080215180107358] on invalid z level [1]
06:20:21 ERROR: visible item[tk] id[tk20080215180107797] on invalid z level [1]
06:20:21 ERROR: visible item[tk] id[tk20080215180106276] on invalid z level [1]
06:20:21 ERROR: visible item[tk] id[tk20080215180106765] on invalid z level [1]
06:20:21 ERROR: visible item[tk] id[tk20080215180105275] on invalid z level [1]
06:20:21 ERROR: visible item[tk] id[tk20080215180105594] on invalid z level [1]
06:20:21 ERROR: visible item[tk] id[tk20080215180104973] on invalid z level [1]
06:20:21 ERROR: visible item[tk] id[tk20080215180103522] on invalid z level [1]
06:20:21 ERROR: visible item[tk] id[tk20080215180103811] on invalid z level [1]
06:20:21 ERROR: visible item[tk] id[tk20080215180102310] on invalid z level [1]
06:20:21 ERROR: visible item[tk] id[tk20080215180102790] on invalid z level [1]
06:20:21 ERROR: visible item[tk] id[tk20080215180101189] on invalid z level [1]
06:20:21 ERROR: visible item[tk] id[tk20080215180101578] on invalid z level [1]
06:20:21 ERROR: visible item[tk] id[tk20080215180100897] on invalid z level [1]
06:20:21 ERROR: visible item[tk] id[tk20080215180058315] on invalid z level [1]
06:20:21 ERROR: visible item[tk] id[tk20080215180028251] on invalid z level [1]
06:20:21 ERROR: visible item[tk] id[tk20080215180028580] on invalid z level [1]
06:20:21 ERROR

sono sovrascrizioni del mio layout? dove devo andare per cancellarle ?? come faccio a cancellarle ???
oppure ignoro ???
grazie ancora, cordiali salluti andrea
andez8
 

Re: ricominciamo da capo

Postby LDG » 25.09.2016, 13:42

Hello Andrea,

sorry for writing in english.

You deleted some levels but not the content of that levels. How to fix this:

Rocview: "Panello traciato"/"Aggiungi panello..."
Nome: dummy1
Livello: 1
"OK"

Select new level "dummy1"

Rocview: "Panello traciato"/"Modifica panello..."
right click with mouse on an empty element and delect last entry: "Elimina panello traciato"
-> "Sei sicuro di volero cancellare" : -> "Yes/Si"
-> "Cancellare tutti i binari collegati a quetso livello?" : -> "Yes/Si"

Do the same with a level (Livello) 5.

Regards,
Lothar
LDG
Site Admin
 

Re: ricominciamo da capo

Postby eroncelli » 27.09.2016, 13:22

La risposta di Lothar, anche se è parzialmente in inglese, mi sembra chiara: se hai dubbi, chiedi ancora.
HO Maerklin, CS2+MS2, PC with Win10, Android phone, electronics by IEK, decoder by Maerklin-ESU-TAMS
".. and let your dog enjoy Rocrail"
eroncelli
 

Re: ricominciamo da capo

Postby andez8 » 27.09.2016, 21:13

ciao,
ecco quello che sono riuscito a fare :
You do not have the required permissions to view the files attached to this post.
andez8
 

Re: ricominciamo da capo

Postby andez8 » 27.09.2016, 21:33

anche questo :
22:27:43 issue [plan non in health] created in directory: [C:\Users\Andrea\Documents\RocRail_plan09_-_1.1.16\issues\plan_non_in_health]
22:24:41 analyzer skipped see previous lines.
22:24:41 This plan is not healthy.
22:24:41 Plan is NOT healthty. See previous ERROR lines.
22:24:41 zlevel check: 3 warnings
22:24:41 WARNING: definition of level[0] title[piano 0] is following level[0] title[livello 1] (first definition is valid)
22:24:41 WARNING: definition of level[0] title[piano 0] is following level[0] title[Ande.Z_9 plain] (first definition is valid)
22:24:41 WARNING: definition of level[0] title[livello 1] is following level[0] title[Ande.Z_9 plain] (first definition is valid)
22:24:41 ERROR: plan position[3-13-0] object[tx] id[tx20120120153827293] overlaps object[sw] id[cross_1]
22:24:41 ERROR: plan position[19-5-0] object[tx] id[tx20110103153557798] overlaps object[tx] id[tx20091226231704866]
22:24:41 ERROR: plan position[15-15-0] object[tx] id[tx20110103150919680] overlaps object[tk] id[tk20091226200508269]
22:24:41 ERROR: plan position[15-15-0] object[tx] id[tx20110103150842559] overlaps object[tk] id[tk20091226200508269]
22:24:41 ERROR: plan position[7-18-0] object[tx] id[tx20090624191133510] overlaps object[tk] id[tk20080211221335508]
22:24:41 ERROR: plan position[3-9-0] object[tx] id[tx20090121215637332] overlaps object[bk] id[b.15-1]
22:24:41 ERROR: plan position[1-6-0] object[tx] id[tx20081231201748127] overlaps object[tk] id[tk20151220145623347]
22:24:41 ERROR: plan position[65-41-0] object[tk] id[tk20160828130716117] overlaps object[tk] id[tk20160828130715285]
22:24:41 ERROR: plan position[9-19-0] object[tk] id[tk20091213190905699] overlaps object[tk] id[tk20080211223624815]
22:24:41 ERROR: plan position[1-16-0] object[tk] id[tk20151220151332898] overlaps object[tk] id[tk20151220151106434]
22:24:41 ERROR: plan position[0-14-0] object[tk] id[tk20110216160309886] overlaps object[tk] id[tk20120120160553970]
22:24:41 WARNING: signal s. 01 has no primary address set
22:24:41 ERROR: loco FS Gr 893 has no address set
22:24:41 ERROR: loco FS Gr 421 has no address set
22:24:41 WARNING: switch sc45_C has no address set
22:24:41 WARNING: switch sc.04a has no address set
22:24:41 WARNING: switch sc.39b_(B) has no address set
22:24:41 WARNING: switch sc 43a_(B) has no address set
22:24:41 WARNING: switch gh has no address set
22:24:41 WARNING: switch sc 39a_(B) has no address set
22:24:41 switch sc 38a_(B) has an already used address 2-1 by sc 37_(B) (aMapKey=2-1-1-0-1-KDCCX-GenLi-0-)
22:24:41 WARNING: switch sc 15 has no address set
22:24:41 switch test has an already used address 0-1 by sc 06 (aMapKey=0-1-0-0-1-KDCCX-GenLi-0-)

di nuovo grazie, andrea
andez8
 

Re: ricominciamo da capo

Postby eroncelli » 28.09.2016, 06:19

Hai questi errori:
1) alcuni simboli sono sovrapposti
2) alcune loco non hanno indirizzo
3) idem per scambi etc

Non mi è chiaro il primo tipo di "warning": dovrebbe essere un "doppio nome" dato ai livelli (però funziona lo stresso e ti dice che applica il primo nome)
HO Maerklin, CS2+MS2, PC with Win10, Android phone, electronics by IEK, decoder by Maerklin-ESU-TAMS
".. and let your dog enjoy Rocrail"
eroncelli
 

Re: ricominciamo da capo

Postby LDG » 28.09.2016, 06:38

Hello,
eroncelli wrote:Hai questi errori:
1) alcuni simboli sono sovrapposti
2) alcune loco non hanno indirizzo
3) idem per scambi etc
ERRORs have to be solved/removed. WARNING and INFO are not so important but should be removed in further steps.
eroncelli wrote:Non mi è chiaro il primo tipo di "warning": dovrebbe essere un "doppio nome" dato ai livelli (però funziona lo stresso e ti dice che applica il primo nome)
Naming of level 0 is located multiple times in "plan_09 Rocrail-Andez8.xml" (renamed plan.xml by Andrea). Only the first name is shown.
Use "[url]Clean basic problems on all items[/url]". Do not forget to restart Rocrail server twice as mentioned on the base of that page.

Regards,
Lothar
LDG
Site Admin
 

Re: ricominciamo da capo

Postby andez8 » 01.10.2016, 08:23

hello to all,
also again thank for your advices,
sorry but this last time i didin't understand the procedure to remove the last errors:
<< Naming of level 0 is located multiple times in "plan_09 Rocrail-Andez8.xml" (renamed plan.xml by Andrea). Only the first name is shown.
Use "[url]Clean basic problems on all items[/url]". Do not forget to restart Rocrail server twice as mentioned on the base of that page. >>
<< This plan is not healthy.
22:24:41 Plan is NOT healthty. See previous ERROR lines.
22:24:41 zlevel check: 3 warnings
22:24:41 WARNING: definition of level[0] title[piano 0] is following level[0] title[livello 1] (first definition is valid)
22:24:41 WARNING: definition of level[0] title[piano 0] is following level[0] title[Ande.Z_9 plain] (first definition is valid)
22:24:41 WARNING: definition of level[0] title[livello 1] is following level[0] title[Ande.Z_9 plain] (first definition is valid)
22:24:41 ERROR: plan position[3-13-0] object[tx] id[tx20120120153827293] overlaps object[sw] id[cross_1]
22:24:41 ERROR: plan position[19-5-0] object[tx] id[tx20110103153557798] overlaps object[tx] id[tx20091226231704866]
22:24:41 ERROR: plan position[15-15-0] object[tx] id[tx20110103150919680] overlaps object[tk] id[tk20091226200508269]
22:24:41 ERROR: plan position[15-15-0] object[tx] id[tx20110103150842559] overlaps object[tk] id[tk20091226200508269]
22:24:41 ERROR: plan position[7-18-0] object[tx] id[tx20090624191133510] overlaps object[tk] id[tk20080211221335508]
22:24:41 ERROR: plan position[3-9-0] object[tx] id[tx20090121215637332] overlaps object[bk] id[b.15-1]
22:24:41 ERROR: plan position[1-6-0] object[tx] id[tx20081231201748127] overlaps object[tk] id[tk20151220145623347]
22:24:41 ERROR: plan position[65-41-0] object[tk] id[tk20160828130716117] overlaps object[tk] id[tk20160828130715285]
22:24:41 ERROR: plan position[9-19-0] object[tk] id[tk20091213190905699] overlaps object[tk] id[tk20080211223624815]
22:24:41 ERROR: plan position[1-16-0] object[tk] id[tk20151220151332898] overlaps object[tk] id[tk20151220151106434]
22:24:41 ERROR: plan position[0-14-0] object[tk] id[tk20110216160309886] overlaps object[tk] id[tk20120120160553970]
22:24:41 WARNING: signal s. 01 has no primary address set
22:24:41 ERROR: loco FS Gr 893 has no address set
22:24:41 ERROR: loco FS Gr 421 has no address set
22:24:41 WARNING: switch sc45_C has no address set
22:24:41 WARNING: switch sc.04a has no address set
22:24:41 WARNING: switch sc.39b_(B) has no address set
22:24:41 WARNING: switch sc 43a_(B) has no address set
22:24:41 WARNING: switch gh has no address set
22:24:41 WARNING: switch sc 39a_(B) has no address set
22:24:41 switch sc 38a_(B) has an already used address 2-1 by sc 37_(B) (aMapKey=2-1-1-0-1-KDCCX-GenLi-0-)
22:24:41 WARNING: switch sc 15 has no address set
22:24:41 switch test has an already used address 0-1 by sc 06 (aMapKey=0-1-0-0-1-KDCCX-GenLi-0-) >>
again thank and regards, andrea
andez8
 

PreviousNext

Return to Modalità automatica (IT)