CS2 and locomotives

Märklin Central Station 2

CS2 and locomotives

Postby berHul226 » 12.10.2014, 09:23

I have change from 6021 to cs2.
When I try to use lokomotives I get "Lokomotives not found"
When i use switches in the plan its ok and good funktion.
I have change also what needs for mxf-decoder.
I Think I make some basic misstakes.
Can i get help?

Best regards
B-O
berHul226
 

Re: CS2 and locomotives

Postby rjversluis » 12.10.2014, 09:41

Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Re: CS2 and locomotives

Postby berHul226 » 17.10.2014, 08:44

It is function for motorola if the loco not defined in cs2.
For mfx I have translate hexadecimal regarding file locomote.cs2 but it is still problem.
Best regards
B-O
berHul226
 

Re: CS2 and locomotives

Postby woodyboy » 17.10.2014, 11:48

To me your desciption sounds very cryptographic.
Which value have you translated? As far as I know you need the SID of the mfx device to use as the address to command a loc and the protocol serverdefined. For me this works with a Gleisbox. Look here it for a clear explanation (dutch) http://wiki.rocrail.net/doku.php?id=cs2:cs2-nl
Regards,

Bert

Equipment: Roco WLANMaus, MS2, Gleisbox 2x(separated switch & rollingstock). Ubuntu 16. Edits booster. Arduino: S88 CANbus interface & Ethernet-CANbus gateway
woodyboy
 

Re: CS2 and locomotives

Postby berHul226 » 17.10.2014, 13:09

Thank You for the answer.
I have from the beginning translate to the sid address exact as in the manual of wiki.
But still problem.

Best regards
B-O
berHul226
 

Re: CS2 and locomotives

Postby eroncelli » 18.10.2014, 15:20

With recent versions of CS SW, you can see the loco file directly on you PC by typing 192.168.1.xxx/config/lokomotive.cs2 (192.168.1.xxx is the address of your CS2).

Then, as already explained, set the address (the "decimal" value, as converted from the "exadecimal" given in the file), version=2 and Interface=server defined

You will see that all the commands issued by RR for that loco shaw the "mfx" mark.
Don't forget to enter the "exact name" (Upper and lower cases, spaces etc): CS2 recognize locos by name
HO Maerklin, CS2+MS2, PC with Win10, Android phone, electronics by IEK, decoder by Maerklin-ESU-TAMS
".. and let your dog enjoy Rocrail"
eroncelli
 


Return to CS2