Rocrail sources access.

Questions and discussions around compiling of Rocrail, usage of wxWidgets etc.

Moderators: dadolphs, Moderators

Re: Rocrail sources access.

Postby flangel » 16.01.2018, 11:26

Hello Rob,

I'm a developer (C++, C# ) and would like to extend the xml scripts. I would like to have access to your sources for this.

Frank
------------------------------------------------------------------------------
Märklin H0, Only DCC, Rocrail Server on Windows, dr5000, Xpressnet
flangel
 

Re: Rocrail sources access.

Postby rjversluis » 16.01.2018, 11:43

Hi Frank,

source access is only for build locally, not for extending functionality.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Re: Rocrail sources access.

Postby flangel » 17.01.2018, 14:13

Hi Rob,

Too bad, I would like to have worked on your project. I have some old linux pc with ubuntu 16.04.3 LTS with limited desktop and would like to compile the sources themselves.
The downloads always ran into a bug.
If I can help you somehow, I like being there.

Best Regards
Frank
------------------------------------------------------------------------------
Märklin H0, Only DCC, Rocrail Server on Windows, dr5000, Xpressnet
flangel
 

Re: Rocrail sources access.

Postby thomass » 23.02.2018, 14:27

Hi Rob,

I am working on a small hardware project for RaspberryPi Zero W, similar to Gerd Bertelsmann's project for BananaPi ( http://lnxpps.de/bpi/ ) but with an additional IR-Receiver for the Maerklin IR-Transmitter and system power coming out of the Gleisbox.
From OS side I want to use LEDE, too. So please would you grant me access to the git repos since there are no pre-built LEDE-packages for rocrail on RPi available.

Thanks & Regards,
Thomas
thomass
 

Re: Rocrail sources access.

Postby rjversluis » 23.02.2018, 15:00

Hi Thomas,

first you must register at gitlab.com and write your username here.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Re: Rocrail sources access.

Postby thomass » 23.02.2018, 17:44

Hi Rob,

Indeed, that makes sense.

My gitlab.com username is thomassteinle

Thanks,
Thomas
thomass
 

Re: Rocrail sources access.

Postby thomass » 23.02.2018, 17:55

Hi Rob,

Thank you for your quick reply.

-Thomas
thomass
 

Re: Rocrail sources access.

Postby Elvar » 05.03.2018, 21:01

rjversluis wrote:Hi Elvar,

just check your email.


Hi Rob,
You sent me the access data to the source code a long time ago (August 2016) and I used the account frequently in that year. Then I had no time to work with the code any more and when I tried to access it today I got "server not found". Surely I missed something happened last year. So please send current access data again. Thanks,

Eckart (still my real first name...)
Elvar
 

Re: Rocrail sources access.

Postby smitt48 » 05.03.2018, 21:09

Hi Eckart,

Account changed to Gitlab.
register there and ask again!

Tom

edit hub changed to lab :oops:
Last edited by smitt48 on 06.03.2018, 12:58, edited 1 time in total.
Kind regards,
Tom Smit
Kralendijk, Bonaire - Dutch Caribbean

Märklin M & K-rails with ECoS2 (4.2.3) - Win10
RoSoft: S88n & WDD switch & SDD signal decoders
Display: Tri-ang from 1950's, Märklin from early 1960's
In build phase
smitt48
 

Re: Rocrail sources access.

Postby RainerK » 05.03.2018, 23:46

Hi Tom,
smitt48 wrote:...Account changed to Github...

that is not correct.
GitHub was the previuos Source server.
GitLab is the current server.
Best Regards, es grüßt RainerK

DCC++ with Arduino Uno / Motor shield and LocoNet GCA85, 50, 93 and 136. Special interests: DIY electronic assemblies. http://www.rainermoba.blogspot.com
Planning replace the coincidence by the mistake
RainerK
 

Re: Rocrail sources access.

Postby Elvar » 06.03.2018, 00:28

RainerK wrote:Hi Tom,
smitt48 wrote:...Account changed to Github...

that is not correct.
GitHub was the previuos Source server.
GitLab is the current server.


Ah, I've got it. So here is my GitLab username: emey05

Eckart
Elvar
 

Re: Rocrail sources access.

Postby rjversluis » 06.03.2018, 07:15

Elvar wrote:You sent me the access data to the source code a long time ago (August 2016) and I used the account frequently in that year. Then I had no time to work with the code any more and when I tried to access it today I got "server not found". Surely I missed something happened last year. So please send current access data again. Thanks,

Eckart (still my real first name...)

why do you need source access?
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Re: Rocrail sources access.

Postby Elvar » 06.03.2018, 14:59

rjversluis wrote:
Elvar wrote:You sent me the access data to the source code a long time ago (August 2016) and I used the account frequently in that year. Then I had no time to work with the code any more and when I tried to access it today I got "server not found". Surely I missed something happened last year. So please send current access data again. Thanks,

Eckart (still my real first name...)

why do you need source access?


Same reason than in 2016:
- I have a special Command Station driver for my own Arduino based Hardware
- addtionally, I implemented some modifications in the BiDiB driver (partly discussed somewhere in this forum or in opendcc forum a year ago or so)

Eckart
Elvar
 

Re: Rocrail sources access.

Postby rjversluis » 06.03.2018, 15:13

Why not share it here?
If it makes sense I can adopt it.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Re: Rocrail sources access.

Postby Elvar » 06.03.2018, 18:03

rjversluis wrote:Why not share it here?
If it makes sense I can adopt it.


Possible - but without access to the source ...
Elvar
 

PreviousNext

Return to Building & Compiling