padRoc: The coming iPad Client

iPad based Rocrail client

Postby rjversluis » 24.11.2010, 09:53

Hi Gérald,

I can use the translations made for iRoc.
If new words are missing you can help translate them.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Postby geraldfg95 » 24.11.2010, 12:24

ok
give me acces , and i translate it quickly

br
gg
lenz lzv 100 v3.1 , lh100 , mac mini core 2 duo 2ghz , snow leopard , cdf accesory interfaces , rs8 detection interfaces . ipad + 2 ROCRAIL CAPS !
geraldfg95
 

Postby rjversluis » 24.11.2010, 12:54

Hi Gérald,

just add it here:
http://wiki.rocrail.net/doku.php?id=iph ... lations-en

If you do not have Wiki access just ask.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Postby geraldfg95 » 24.11.2010, 13:18

Yes , i have not wiki acces ....
Br
Gg
lenz lzv 100 v3.1 , lh100 , mac mini core 2 duo 2ghz , snow leopard , cdf accesory interfaces , rs8 detection interfaces . ipad + 2 ROCRAIL CAPS !
geraldfg95
 

Postby geraldfg95 » 24.11.2010, 14:46

Ok Rob

French language is set ... 8)
Br
GG
lenz lzv 100 v3.1 , lh100 , mac mini core 2 duo 2ghz , snow leopard , cdf accesory interfaces , rs8 detection interfaces . ipad + 2 ROCRAIL CAPS !
geraldfg95
 

Postby rjversluis » 24.11.2010, 18:02

OK,

to all iRoc/padRoc translators:

I added some new strings which are found in the Dutch translation:
http://wiki.rocrail.net/doku.php?id=iph ... lations-en

Please update your own language.

DE, IT, FR, ...
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Postby RainerK » 24.11.2010, 23:45

Hi,

DE done

Best Regards
RainerK
Best Regards, es grüßt RainerK

DCC++ with Arduino Uno / Motor shield and LocoNet GCA85, 50, 93 and 136. Special interests: DIY electronic assemblies. http://www.rainermoba.blogspot.com
Planning replace the coincidence by the mistake
RainerK
 

Postby rjversluis » 25.11.2010, 07:06

Tnx Rainer!
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Postby RainerK » 25.11.2010, 20:10

Hi Rob,

I saw that you had to add the quotes in the "Settings".
Please excuse this mishap. :oops:
The loosing went without realizing it, while I was editing in Excel (the eternal annoyance) :cry:

Best Regards
RainerK
Best Regards, es grüßt RainerK

DCC++ with Arduino Uno / Motor shield and LocoNet GCA85, 50, 93 and 136. Special interests: DIY electronic assemblies. http://www.rainermoba.blogspot.com
Planning replace the coincidence by the mistake
RainerK
 

Postby rjversluis » 25.11.2010, 20:17

Hi Rainer,

no problem; "Less is more." :wink:
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Postby gramels » 26.11.2010, 10:40

Hi

is padroc now commercial? Under a commercial licence?

I just saw it for 14 CHF in the AppStore.

Personnally, a commercial licence affects my desire to contribute, review and provide test feedback.

Don't get me wrong, I extremely value Robs contributions.

However, this mix between GPL based rocrail and commercial proprietary licenced padroc is problematic.
Especially since most likely padroc shares certain GPL based code & translation files from rocrail. That would be a violation of the GPL of rocrail.

Why not just stick with donation and donation key to kill annoying reminder as before?

Lothar
openDCC - MultiMaus - (MERG RFID) - testing a planned garden layout in IIm -
gramels
 

Postby rjversluis » 26.11.2010, 10:59

Hi Lothar,

padRoc is GPL and open source:
https://code.launchpad.net/~r.j.versluis/rocrail/padRoc

You can download it, modify it and install it on your iPad without paying a penny!

The App Store is commercial:
I must pay $99 yearly and Apple takes 30% of the purchase price!

Its not Rocrail going commercial but Apple, iPad and iPhone users are pushing it!

The testers of padRoc insisted to ask money for it!!!

Sigh.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Postby gramels » 26.11.2010, 11:07

Hi Rob,

ok, this way its perfect, thanks.
So the 9.99 EU are for your compilation and Apples publication service, not for the actual coding.
Works license wise and is a nice twist. :-)

I like it.

Cheers
openDCC - MultiMaus - (MERG RFID) - testing a planned garden layout in IIm -
gramels
 

Postby jeanmichel » 26.11.2010, 21:31

Hi,

That would be a violation of the GPL of rocrail.


nope, not at all. (as you and Rob said).

EDIT: and iRoc will from this evening charged as well with 9,99€ .

Gruß
Jean-Michel
jeanmichel
 

Postby gramels » 27.11.2010, 08:57

For my own curiosity I digged in to that GPL / App store stuff a little more.
It seems not so easy to have GPLd apps in the app store and stay in line with the GPL thow:

http://www.macnotes.de/2010/11/02/vlc-p ... cheinlich/

http://www.fsf.org/blogs/licensing/more ... nforcement

http://www.ifross.org/artikel/gpl-im-ap ... erwuenscht

However all comments and articles read more like political statements than a solid license situation analysis.

messy stuff, I start to hate this
openDCC - MultiMaus - (MERG RFID) - testing a planned garden layout in IIm -
gramels
 

PreviousNext

Return to padRoc