connection fail

connection fail

Postby geraldfg95 » 27.11.2010, 21:20

All is ok but it happens that rocrail connection with my unit crash ..
I have connection broken message in rocview , no action possible , must reboot mac mini ....
After all is ok for one or two hours ....
see trace .

Thanks
Gérald
You do not have the required permissions to view the files attached to this post.
lenz lzv 100 v3.1 , lh100 , mac mini core 2 duo 2ghz , snow leopard , cdf accesory interfaces , rs8 detection interfaces . ipad + 2 ROCRAIL CAPS !
geraldfg95
 

Postby rjversluis » 27.11.2010, 21:40

Hi Gérald,

looks like a device driver problem.
Maybe you should check for newer releases:

http://wiki.rocrail.net/doku.php?id=mac ... ial_driver
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Postby geraldfg95 » 27.11.2010, 21:59

Hi Rob
Is already last driver version who is installed ....

br
GG
lenz lzv 100 v3.1 , lh100 , mac mini core 2 duo 2ghz , snow leopard , cdf accesory interfaces , rs8 detection interfaces . ipad + 2 ROCRAIL CAPS !
geraldfg95
 

Postby rjversluis » 27.11.2010, 22:17

Hi Gérald,

I had a simular problem in March this year on an exhibition...

Finally I solved the problem: There where 240VAC transformers to near by the connection cable between the MacBook and the Command Station...
It was very stressing because it did not happen at once but after a random time running the trains very well.
I also had to reboot the Mac to regain a new connection.

Electricians told me it can not be that those transformers cause trouble to the communication, but they where wrong. Maybe real RS232 connections won't suffer this problem but USB-RS232 seems to be very sensitive.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Postby geraldfg95 » 27.11.2010, 22:20

Hey !
My tranformator is at 20 cm to the connexion cable .
I modifi it very quickly ... :P
Br
Gg
lenz lzv 100 v3.1 , lh100 , mac mini core 2 duo 2ghz , snow leopard , cdf accesory interfaces , rs8 detection interfaces . ipad + 2 ROCRAIL CAPS !
geraldfg95
 

Postby geraldfg95 » 05.12.2010, 12:27

Hi Rob
Since i have modified location of li-usb that seems to function .
So i think you found the reason of trouble ...

Thanks to you ! :D

Br
GG
lenz lzv 100 v3.1 , lh100 , mac mini core 2 duo 2ghz , snow leopard , cdf accesory interfaces , rs8 detection interfaces . ipad + 2 ROCRAIL CAPS !
geraldfg95
 

Postby rjversluis » 05.12.2010, 14:31

Hi Gérald,

very good.

Its now in the FAQ:
http://wiki.rocrail.net/doku.php?id=faq-en#usb
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 


Return to Snapshots