[SOLVED] RR, FTDI USBSerialDriver, Mac OS, CCShnitte2 &

Märklin Central Station 2

Postby macsddau » 02.11.2013, 07:27

Will it be possible for Rocrail team to implement the FTDI D2XX driver ?
[MS2] [C.D.B. StartSetCC2] [LDT S-DEC-DC] [Mac OSX MLion] [N:SNCF IV-V]
macsddau
 

Postby rjversluis » 02.11.2013, 08:53

SUCCESS!!!

It runs now on my Mac with 500000 baud rate! :)

With the Virtual Com Port Driver. (VCP)

Rocrail 6208+.

macsddau wrote:Will it be possible for Rocrail team to implement the FTDI D2XX driver ?

No. Not needed.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Postby macsddau » 02.11.2013, 11:05

:D :D :D :D

RR is commanding my model train !!!

There are somme errors :
- RR turn power OFF while the MS2 continue to work.
- Commands on the MS2 don't affect RocRail

Here are the traces files
You do not have the required permissions to view the files attached to this post.
[MS2] [C.D.B. StartSetCC2] [LDT S-DEC-DC] [Mac OSX MLion] [N:SNCF IV-V]
macsddau
 

Postby rjversluis » 02.11.2013, 11:10

CAN-ID 0x01 is not documented.

Turn off the BYTE level trace and you have to be more specific which commands you mean.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Postby rjversluis » 02.11.2013, 11:27

In 6211 I removed reading trash bytes which is no longer needed and did throw away valid CAN messages(partly) and thats why RR did not understand them.
You can download it in 15mins.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Postby rjversluis » 02.11.2013, 12:04

The looping "De Luxe Reporter" in demo mode:
Code: Select all
20131102.120307.297 r9999c mcs2read OMCS2    0509 sensor 0:1 = 1 (type=8)
20131102.120308.086 r9999c mcs2read OMCS2    0509 sensor 0:1 = 0 (type=8)
20131102.120308.108 r9999c mcs2read OMCS2    0509 sensor 0:2 = 1 (type=8)
20131102.120308.886 r9999c mcs2read OMCS2    0509 sensor 0:2 = 0 (type=8)
20131102.120308.908 r9999c mcs2read OMCS2    0509 sensor 0:3 = 1 (type=8)
20131102.120309.682 r9999c mcs2read OMCS2    0509 sensor 0:3 = 0 (type=8)
20131102.120309.705 r9999c mcs2read OMCS2    0509 sensor 0:4 = 1 (type=8)
20131102.120310.487 r9999c mcs2read OMCS2    0509 sensor 0:4 = 0 (type=8)
20131102.120310.509 r9999c mcs2read OMCS2    0509 sensor 0:5 = 1 (type=8)
20131102.120311.286 r9999c mcs2read OMCS2    0509 sensor 0:5 = 0 (type=8)
20131102.120311.313 r9999c mcs2read OMCS2    0509 sensor 0:6 = 1 (type=8)
20131102.120312.092 r9999c mcs2read OMCS2    0509 sensor 0:6 = 0 (type=8)
20131102.120312.114 r9999c mcs2read OMCS2    0509 sensor 0:7 = 1 (type=8)
20131102.120312.887 r9999c mcs2read OMCS2    0509 sensor 0:7 = 0 (type=8)
20131102.120312.909 r9999c mcs2read OMCS2    0509 sensor 0:8 = 1 (type=8)
20131102.120313.701 r9999c mcs2read OMCS2    0509 sensor 0:8 = 0 (type=8)
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Postby macsddau » 07.11.2013, 18:18

Very fine !

Rocrail works now with the CCSchnitte2 and the GleisBox Trix. There are some improvement to be made.

So I will close this post as [SOLVED].

I'll probably open other post to expose other sources of mistake during the use of the Rocrail (due or not to the CCS2).

Thanks Rob

Denis
[MS2] [C.D.B. StartSetCC2] [LDT S-DEC-DC] [Mac OSX MLion] [N:SNCF IV-V]
macsddau
 

Previous

Return to CS2

cron