Differences

This shows you the differences between two versions of the page.

--- arduino:wio-setup-en [2025/04/14 11:39] – [?] rjversluis
+++ arduino:wio-setup-en [2025/05/03 16:30] (current) – [WEB Browser] babbel
@@ Line 45: / Line 45: @@
 ====Report====
-{{ :arduino:wio-report.jpg?200}}
+{{:arduino:wio-report.jpg?200}}\\
 A usage report is generated for all WIO modules in the query.\\
 The default program wil be started to view the CSV file.\\
-====WEB Browser====
+==== WEB Browser ====
-This will open the default WEB Browser with the IP of the selected WIO to be able to __**[[:arduino:amp-en#upload_by_web_browser|maintain SPIFFS files]]**__.\\
+This function opens the default web browser and connects to the IP address of the selected WIO.\\
+{{:arduino:wio-web-setup-en.png?200|}} \\
+The following settings can be configured via the web interface:
+  * IP address of the Rocrail server
+  * Name of the WIO
+  * SSID and password for the first and second WiFi connection
+After entering the desired data, click the Submit button to apply the changes.
+**List files...**\\
+Opens the file view of the WIO's flash memory. The following files can be managed here:
+  * [[:wio:wio-ledscript-en|LED scripts]]
+  * [[:wio:wio-ioscript-en|IOScript]]
+  * [[:wio:wio-crontab-en|Crontab]]
+  * [[:arduino:amp-en#upload_by_web_browser|SPIFFS files]]
+**WiFi tracing**\\
+With the WiFi tracing ON/OFF switch you can activate and deactivate the debug output of the serial interface, in the trace and as output in Rocview under Controller.
 ====CAM Stream====
 In case of type CAM the streaming link can be used:
@@ Line 67: / Line 94: @@
 ====CAN====
-{{ :arduino:wio-mbus-can-en.png?200}}
+{{:arduino:wio-mbus-can-en.png?200}} \\
 The extra service on port 5550 can be used to communicate with a CAN bus like MBUS.\\
 A power off command is send to CAN if the WiFi or Rocrail connection is lost.\\
@@ Line 180: / Line 207: @@
 ===LDR===
-LDR between 3V3 and GP28. (PicoW)\\
+LDR between 3V3 and GP28 needs 10 kOhm pulldown. (PicoW)\\
 This will report the brightness to Rocrail. ([[:text-gen-en#variables|%bri%]])\\