Philips HUE Accessory

Content → Command Stations → Philips

Accessory Types

The following accessory types are supported:

Type	Units	Remark
ZLLSwitch	number [1,2,3,4]	Button number last pressed.
ZLLPresence	boolean [0,1]	Movement detection.
ZLLTemperature	hundreds of °C	Room temperature.
ZLLLightlevel	log10 lux	Light level.
Daylight	boolean [0,1]	True in case daylight is detected.

HUE sensors are numbered from 1 to 12, which are used as address in Rocrail.
The sensor type must be set to register.
See also:

At which point the sensor will turn on/off, depends on the used threshold value on the interface tab.