PT & Tams MasterControl

Moderator: Moderators

PT & Tams MasterControl

Postby fanky » 04.05.2010, 00:22

Hello.
I have a Tams MasterControl central unit (EasyControl) and use the RocRail library P50X but when use the PT I find some errors on the serial port and I do not able to read/write the CV. From then the communication with the central unit is not more working and must restar RocRail. I have since in the documentation there is a reference to a link on purpose of the PT with TAMS that but does not work.
The link is :
http://sourceforge.net/tracker/index.ph ... tid=501346

Someone can help me?
fanky
 

Postby andre0604 » 18.09.2010, 10:22

Hi Fanky,

I am using TAMS too and today I did try the first time to use the programming track together with rocrail and it failed also. I am using the latest rocrail snapshot and latest firmware for my TAMS Easy Control. I will attach a trace file which contains the errors. Maybe somebody can have a look at that to get a idea about this issue.

Best regards
Andre
You do not have the required permissions to view the files attached to this post.
andre0604
 

Postby fanky » 18.09.2010, 11:31

We hope. I have tried to also contact the Tams for this problem and they have told me that to the moment don't support RocRails ... :(
fanky
 

Postby rjversluis » 18.09.2010, 11:55

Hi,

try to read cv's without activating the PT button; Is for Intellibox only.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBUS - CANGCx ] - [ G: CBUS - CANGCx ]
rjversluis
Site Admin
 

Postby rjversluis » 18.09.2010, 12:02

Oops!

We had this issue some time ago:

http://wiki.rocrail.net/doku.php?id=p50 ... ming_track
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBUS - CANGCx ] - [ G: CBUS - CANGCx ]
rjversluis
Site Admin
 

Postby andre0604 » 18.09.2010, 18:10

Hi Rob,

thanks for your Info. I did try all that (reading without pushing the PT button, checking PT or not) but all without success. It looks like, that the workaround is not working anymore.

Best regards
Andre
andre0604
 

Postby rjversluis » 18.09.2010, 19:04

Ask Tams to give information on how to program mobile decoders.
The p50x protocol defines how to and that works with IB and OpenDCC.
I will not contact Tams.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBUS - CANGCx ] - [ G: CBUS - CANGCx ]
rjversluis
Site Admin
 

Postby opendcc » 19.09.2010, 05:52

Hello,

AFAIK, p50xb is not implemented in the tams EC (at least this was the status im 'tams release notes 1.4.5m'), programming is done with p50xa only. Is rocrail operating with p50xa or p50xb?

br Wolfgang
opendcc
 

Postby rjversluis » 19.09.2010, 07:31

Hi Wolfgang,

Rocrail only uses p50xb.

Does Tams need a mixed salad of both?
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBUS - CANGCx ] - [ G: CBUS - CANGCx ]
rjversluis
Site Admin
 

Postby opendcc » 20.09.2010, 04:27

rjversluis wrote:Does Tams need a mixed salad of both?

Hi Rob,
I fear so ... as stated above: programming is done with p50xa only. In 'tams release notes 1.4.5m' at the end there is a list of commands supported by the Tams. And you are not the only one, who run into this trap.

br Wolfgang
opendcc
 

Postby rjversluis » 20.09.2010, 08:14

Hi Wolfgang,

programming is done with p50xa only


that is a pity; We must wait until Tams implemented the p50xb commands.

@allTamsOwners: Complain by writing an email to Tams.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBUS - CANGCx ] - [ G: CBUS - CANGCx ]
rjversluis
Site Admin
 

Postby andre0604 » 20.09.2010, 09:27

Hi,

yes I will complain to TAMS but so far I can see TAMS do not like to support Rocrailers. Maybe somebody knows a commercial software which can not use the programming feature. This would give a little bit more pressure to TAMS.

Best regards
Andre
andre0604
 

Postby rjversluis » 20.09.2010, 12:57

Hi,

if there are enough Tams users who would like to see the programming working I will create a Tams library which will use the p50x for all except the programming of decoders.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBUS - CANGCx ] - [ G: CBUS - CANGCx ]
rjversluis
Site Admin
 

Postby andre0604 » 20.09.2010, 13:19

Hi Rob,

good offer. So all TAMS users please cry here I am...

Best regards
Andre
andre0604
 

Postby rjversluis » 20.09.2010, 13:21

Hi Andre,

I will create it anyway if you are willing to test.
There is not so much work involved to create it.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBUS - CANGCx ] - [ G: CBUS - CANGCx ]
rjversluis
Site Admin
 

Next

Return to P50 and P50x