help to set up märklin s88

Moderator: Moderators

help to set up märklin s88

Postby mike ip » 02.09.2012, 11:40

hey rocrail user.
I have a problem with getting my Märklin S88 to work, it is tested and it works, so it must be a software problem but I can not find it in bottom of my screen there are 3 red and 2 green lights when I starts rocrail number 1 is red, number 2 and 3 are green and 4/5 are red and I do not know if it has anything to do with it that it does not work.
control panel is Märklin 6021 and 6050 interface and PC with linux
so I need help. :cry:
You do not have the required permissions to view the files attached to this post.
mike ip
 

Postby rjversluis » 02.09.2012, 12:20

Attache the rocrail.ini and the rocrail.*.trc files.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Postby mike ip » 02.09.2012, 14:05

okay Here are the, I can not upload trc. files can I email you?
You do not have the required permissions to view the files attached to this post.
mike ip
 

Postby rjversluis » 02.09.2012, 14:13

mike ip wrote:okay Here are the, I can not upload trc. files can I email you?

No, just compress(Zip, GZip, tar.gz) it.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Postby mike ip » 02.09.2012, 14:32

okay
You do not have the required permissions to view the files attached to this post.
mike ip
 

Postby mike ip » 02.09.2012, 14:34

here are some more
You do not have the required permissions to view the files attached to this post.
mike ip
 

Postby rjversluis » 02.09.2012, 14:34

The number of sensor units is not set:
http://wiki.rocrail.net/doku.php?id=6050-en#sensors

PS: Next time you should make one archive, tar.gz, with all needed files.
Last edited by rjversluis on 02.09.2012, 14:36, edited 1 time in total.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Postby mike ip » 02.09.2012, 14:35

here are some more
You do not have the required permissions to view the files attached to this post.
mike ip
 

Postby mike ip » 02.09.2012, 14:36

here are the last one
You do not have the required permissions to view the files attached to this post.
mike ip
 

Postby mike ip » 02.09.2012, 15:06

Okay now I have inserted 1 sensor but it does not help. there are only green light in the same as before. what is the first adesse on port 1
mike ip
 

Postby rjversluis » 02.09.2012, 15:17

Don't botter the indicators on the right bottom of Rocview; Its not implemented in all Command Stations.

An s88 modules has 2 x 8 ports so you must set it to 2.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Postby LDG » 02.09.2012, 15:23

Hi Mike,

some things I discovered when testing your plan.xml and rocrail.ini:

Your p50 command station is configured to have no feedback sensors :arrow: the Rocrail server will never read in any sensors.

Please remove the virtual command station from your layout or use the "Interface ID" of the p50 command station with all your "real" sensors.

Your plan is not healthy (and has to be cleaned manually :( ) but this has no side effect on your s88-problem.

The feedback assignments to the blocks is "strange".

Regards,
Lothar
LDG
Site Admin
 

Postby mike ip » 02.09.2012, 15:28

ok. I have done now but I can not get it to work. Do you have any suggestions
mike ip
 

Postby mike ip » 02.09.2012, 16:14

Hi LDG.
it seems that I've got it working after I delete the virtual command station. so many thanks to all of you. from Denmark
mike ip
 

Postby mike ip » 02.09.2012, 19:11

Hi LDG
what do you mean by unhealthy plan and it has to be cleaned manually?
mike ip
 

Next

Return to P50 and P50x