help to set up märklin s88

LDG
Site Admin
Posts: 2668
Joined: 18.10.2010, 00:03
Location: near Karlsruhe/Germany

Post by LDG » 02.09.2012, 19:36

Hi Mike,
my name is Lothar :wink:
mike ip wrote:Hi LDG
what do you mean by unhealthy plan and it has to be cleaned manually?
The first of the five squares in the lower right corner (indicating plan health) is red :( There are multiple definitions for switch 03. I tried to "cleanup" within Rocview (plan editing) but without success, so here is the "manual" way:
- close Rocview and Rocrail server
- open plan.xml with your preferred (text-)editor
- Remove/Delete the following lines and only these short ones! (in your posted plan.xml lines 212-214):

Code: Select all

    <sw type="left" ori="south" id="03" x="9" y="12" z="0"/>
    <sw type="left" ori="south" id="03" x="8" y="11" z="0"/>
    <sw type="left" ori="south" id="03" x="8" y="11" z="0"/> 
- Do NOT delete the follwing block (the correct definition of switch 03):

Code: Select all

    <sw type="left" ori="south" id="03" x="9" y="12" z="0" switched="37" prev_id="03" desc="" blockid="" routeids="" accnr="1" savepos="none" dir="false" swtype="default" road="false" show="true" rectcrossing="true" iid="" bus="0" addr1="1" port1="1" gate1="0" inv="true" singlegate="false" addr2="0" port2="0" inv2="false" actdelay="false" delay="0" prot="N" fbR="" fbG="" fb2R="" fb2G="" fbOcc="" fbRinv="false" fbGinv="false" fb2Rinv="false" fb2Ginv="false" ctciid1="" ctciid2="" ctcaddr1="0" ctcaddr2="0" ctccmdon1="false" ctccmdon2="false" ctcflip1="true" ctcflip2="true" ctciidled1="" ctciidled2="" ctcaddrled1="0" ctcaddrled2="0" ctcportled1="0" ctcportled2="0" ctcgateled1="0" ctcgateled2="0" ctcasswitchled1="false" ctcasswitchled2="false" state="straight">
      <accessoryctrl active="false" interval="0" delay="0" lockroutes=""/>
    </sw> 
- Save plan.xml
- start Rocrail/Rocview

The first of the five squares in the lower right corner (indicating plan health) should be green now :wink:

Regards,
Lothar

mike ip

Post by mike ip » 02.09.2012, 19:57

Hi Lothar

thank you.
it do not work. my plan is still unhealthy.

Regards.
Mike

LDG
Site Admin
Posts: 2668
Joined: 18.10.2010, 00:03
Location: near Karlsruhe/Germany

Post by LDG » 02.09.2012, 20:06

Hi Mike,

please post your actual plan here.

Regards,
Lothar

mike ip

Post by mike ip » 02.09.2012, 20:19

okay
Attachments
plan.xml
(116.19 KiB) Downloaded 96 times

LDG
Site Admin
Posts: 2668
Joined: 18.10.2010, 00:03
Location: near Karlsruhe/Germany

Post by LDG » 02.09.2012, 20:25

... the 3 short lines were still there :shock:
Attached is plan.xml without them :)

Regards,
Lothar
Attachments
plan.xml
(116.02 KiB) Downloaded 100 times

mike ip

Post by mike ip » 02.09.2012, 20:51

now it works

Post Reply

Return to “P50 and P50x”