[Closed] Question about TamsMC settings

Moderator: Moderators

[Closed] Question about TamsMC settings

Postby agre30 » 10.03.2014, 19:53

I bought a TamsMC with 3 B-2 boosters. I can't find an explanation for all the settings in the wiki so I hope someone can explain to me:
- what is the purpose of the timeout option? What is a good value for the TamsMC? I found some threads on the forum but couldn't figure out what is means.
- What is the purpose of the options system info, locomotives and switches.
You do not have the required permissions to view the files attached to this post.
Last edited by agre30 on 15.03.2014, 11:49, edited 1 time in total.
Albert,
Märklin 3-rail
Lubuntu 16.04 (server and client) / TamsMC - Booster B-2 / HSI88 / S88N
Stoom / steam / dampf / diesel / E-loc
agre30
 

Re: Question about TamsMC settings

Postby rjversluis » 11.03.2014, 07:06

This dialog is also used for other command stations and with general options.
Options not documented in the Wiki for your CS are not used.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Re: Question about TamsMC settings

Postby agre30 » 11.03.2014, 12:18

Thanks Rob. I read on the forum the Timeout option is used for de TamsMC. Can you explain to me what is does?
Albert,
Märklin 3-rail
Lubuntu 16.04 (server and client) / TamsMC - Booster B-2 / HSI88 / S88N
Stoom / steam / dampf / diesel / E-loc
agre30
 

Re: Question about TamsMC settings

Postby rjversluis » 11.03.2014, 12:27

The timeout is not directly used by the tamsmc library but by the p50x library.
Primary it is used as timeout on serial communication like waiting for the CTS line.
Secondary this value is also used as mutex timeout to prevent the serial port by multiple threads.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Re: Question about TamsMC settings

Postby agre30 » 12.03.2014, 17:09

What is a mutex timeout? I connected the TamsMC to the USB port. How relevant is this setting?
Albert,
Märklin 3-rail
Lubuntu 16.04 (server and client) / TamsMC - Booster B-2 / HSI88 / S88N
Stoom / steam / dampf / diesel / E-loc
agre30
 

Re: Question about TamsMC settings

Postby rjversluis » 12.03.2014, 17:18

Forumsregeln
4) If you are asking for support for Rocrail functionality, auto mode, switches, signals ... you have to post your rocrail.ini plan file and the trace file.

:?
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Re: Question about TamsMC settings

Postby agre30 » 12.03.2014, 19:02

Here is the cause of my question. I recieved an errror XTrnt rc = 06h. So I started searching the forum and the wiki.
I have atached the issue files.
You do not have the required permissions to view the files attached to this post.
Albert,
Märklin 3-rail
Lubuntu 16.04 (server and client) / TamsMC - Booster B-2 / HSI88 / S88N
Stoom / steam / dampf / diesel / E-loc
agre30
 

Re: Question about TamsMC settings

Postby rjversluis » 12.03.2014, 19:34

Bringt nix wenn du INFO level ausschaltest...
Code: Select all
20140222.145457.458 r9999W hsi88fb  OHSI88   0489 Tossing 8 bytes to wastebasket...
20140222.145520.785 r9999W main     OApp     1131 Shutting down because of [Console command]

:? :shock: :thumb_down:
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Re: Question about TamsMC settings

Postby agre30 » 12.03.2014, 21:18

Ok. I will try to force the error with the info trace level on.
Albert,
Märklin 3-rail
Lubuntu 16.04 (server and client) / TamsMC - Booster B-2 / HSI88 / S88N
Stoom / steam / dampf / diesel / E-loc
agre30
 

Re: [Closed] Question about TamsMC settings

Postby agre30 » 15.03.2014, 11:50

I started I new topic concerning the error.
Albert,
Märklin 3-rail
Lubuntu 16.04 (server and client) / TamsMC - Booster B-2 / HSI88 / S88N
Stoom / steam / dampf / diesel / E-loc
agre30
 


Return to P50 and P50x