[Solved] TamsMC: XTrnt error

Moderator: Moderators

[Solved] TamsMC: XTrnt error

Postby agre30 » 15.03.2014, 11:58

Hi,
I run Rocrail in automote. I had to switch off the power because of a derailment. I received an error XTrnt rc = 06h. Big problem is when I switched on the power afterwards some switches where not in the right position which causes another derailment :cry:
(I use a TamsMC with 2 B-2 boosters)
You do not have the required permissions to view the files attached to this post.
Last edited by agre30 on 16.03.2014, 11:05, edited 1 time in total.
Albert,
Märklin 3-rail
Lubuntu 16.04 (server and client) / TamsMC - Booster B-2 / HSI88 / S88N
Stoom / steam / dampf / diesel / E-loc
agre30
 

Re: TamsMC: XTrnt error

Postby rjversluis » 15.03.2014, 12:02

your trace only contains two lines... :roll:
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Re: TamsMC: XTrnt error

Postby rjversluis » 15.03.2014, 12:07

http://www.tams-online.de/htmls/downloa ... erface.txt
Code: Select all
  0x06   XPWOFF   - Befehl nicht ausgeführt, da MC im Modus STOP
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Re: TamsMC: XTrnt error

Postby agre30 » 15.03.2014, 12:16

I turned 'Info' trace on (as you suggested in my previous thread) and started the trains in auto mode. Within 30 seconds something went wrong because of some stuff on the tracks which did not belong there. Then I pressed the power button in Rocrail and the error occured.
What do you suggest I should do to give you more information?
Albert,
Märklin 3-rail
Lubuntu 16.04 (server and client) / TamsMC - Booster B-2 / HSI88 / S88N
Stoom / steam / dampf / diesel / E-loc
agre30
 

Re: TamsMC: XTrnt error

Postby rjversluis » 15.03.2014, 12:26

Code: Select all
I received an error XTrnt rc = 06h

This means: Command rejected by TamsMC because the power has been switched off.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Re: TamsMC: XTrnt error

Postby agre30 » 15.03.2014, 12:49

Thanks for explaining it, Rob.
I think that explains why the switches are not set when I switch the power back on.
When using the ORD3 with DDX I never had this problem, so what should I do when there is a problem? I think it is better to stop de individual train in stead of pressing power off or are the other (technical) solutions? Is is possible to power off the track while the TamsMC is still sending the switch command?
Albert,
Märklin 3-rail
Lubuntu 16.04 (server and client) / TamsMC - Booster B-2 / HSI88 / S88N
Stoom / steam / dampf / diesel / E-loc
agre30
 

Re: TamsMC: XTrnt error

Postby andre0604 » 15.03.2014, 19:25

Hi Albert,

try to switch automode off before sending power off. Now no more switch commands were send. There are system actions for automode off.

Best regards

Andre
TAMS Easy Control, TAMS Booster B4, Viessmann S88, ESU Switchpilot, Arnold, Minitrix, Fleischmann Spur N, Win XP
andre0604
 

Re: TamsMC: XTrnt error

Postby agre30 » 15.03.2014, 19:49

Thanks Andre, I will give it a try.
Albert,
Märklin 3-rail
Lubuntu 16.04 (server and client) / TamsMC - Booster B-2 / HSI88 / S88N
Stoom / steam / dampf / diesel / E-loc
agre30
 

Re: TamsMC: XTrnt error

Postby agre30 » 15.03.2014, 21:10

Question: is it better to use the emergency break instead?
Albert,
Märklin 3-rail
Lubuntu 16.04 (server and client) / TamsMC - Booster B-2 / HSI88 / S88N
Stoom / steam / dampf / diesel / E-loc
agre30
 

Re: [Solved] TamsMC: XTrnt error

Postby cds » 16.03.2014, 12:37

Hello!

Command rejected by TamsMC because the power has been switched off.

Thx! Now I know what it means. I get this error when I press on a switch while power is off.
Beste Grüße/Kind regards
Claus

M* H0 M
HW: TAMS MC, B-2 & B-4, WD-34, VIESSMANN 5211(1), LITTFINSKY & TAMS S88-3
Decoder: Mä & TAMS (MM2)
SW: Win7 64, RR 64, andRoc
cds
 


Return to P50 and P50x

cron