Problems with Lenz Silver and LokpilotV4 loco decoders

Moderator: Moderators

Problems with Lenz Silver and LokpilotV4 loco decoders

Postby Fogonero » 28.09.2011, 19:07

Hello everyone!!!

I have a small problem of Rocrail with some types of decoder, which I request your help.

I working with Nanox-S88, use loco decoder Lenz Silver, Lokpilot V3 and Lokpilot V4 at 128 steps.

Problem description: On some occasions (10% of time), always with Lenz Silver and Lokpilot V4 and never Lokpilot V3, when in manual mode I pulse STOP in locomotive control, does not stop and continued their march, is necessary to click 2 or 3 times to row stop.

The serius problem is on automatic mode: when a locomotive reaches a block where it should stop and does not. ACCIDENT!!!!

Any change in the decoder CV´s can solve the problem?

Best regards to all.
Fogonero
 

Return to Lenz