beginner needs advice

STEVEHEAT
Posts: 12
Joined: 09.04.2018, 22:48

Re: beginner needs advice

Post by STEVEHEAT » 12.04.2018, 10:07

yes thanks to you both

STEVEHEAT
Posts: 12
Joined: 09.04.2018, 22:48

Re: beginner needs advice

Post by STEVEHEAT » 12.04.2018, 20:52

have now completed track plan not sure I formed the scissors correctly, am now trying to check if plan is healthy and analyse . opened rocrail server whilst I have rocview open with my plan in view , entered z in server and get reply on last line saying please restart sever to activate 21 modifications , have tried this a number of times and have tried altering track plan to see if something else changes when I analyse. It does not seem to change the result so not even sure I am analysing the right track plan.
Have been reading the sheets regarding analyse but cant find the first sheet I came across

rjversluis
Site Admin
Posts: 41610
Joined: 10.04.2006, 08:48
Location: Speyer, Germany
Contact:

Re: beginner needs advice

Post by rjversluis » 12.04.2018, 21:08

Hi, no greeting is OK as long the story is good,
STEVEHEAT wrote:have now completed track plan not sure I formed the scissors correctly, am now trying to check if plan is healthy and analyse . opened rocrail server whilst I have rocview open with my plan in view , entered z in server and get reply on last line saying please restart sever to activate 21 modifications , have tried this a number of times and have tried altering track plan to see if something else changes when I analyse. It does not seem to change the result so not even sure I am analysing the right track plan.
Have been reading the sheets regarding analyse but cant find the first sheet I came across
I must admit that my English knowledge is poor, but I do not understand just one line of your story.

Check this:
http://wiki.rocrail.net/doku.php?id=stepbystep-en

Add your story:
http://wiki.rocrail.net/doku.php?id=issue-en

STEVEHEAT
Posts: 12
Joined: 09.04.2018, 22:48

Re: beginner needs advice

Post by STEVEHEAT » 12.04.2018, 22:14

have been trying a few more things and I think it is analysing plan.xml which is the demo plan and not the plan I have created. the plan I have created only appears to be visible when rocrail is not connected to server ie when I set it to off line
can anyone one tell me what I am doing wrong

Besra
Moderator
Posts: 3749
Joined: 10.08.2009, 17:54
Location: North Rhine-Westphalia, Germany

Re: beginner needs advice

Post by Besra » 12.04.2018, 22:24

I am beginning to lose my patience, too.
have been trying a few more things
-o .
can anyone one tell me what I am doing wrong
Yes, I can: Read the tutorial, please.

Besra
Moderator
Posts: 3749
Joined: 10.08.2009, 17:54
Location: North Rhine-Westphalia, Germany

Re: beginner needs advice

Post by Besra » 13.04.2018, 08:27

the plan I have created only appears to be visible when rocrail is not connected to server ie when I set it to off line
Ok, this probably means you created a plan, used "Save as..." to save it 'somewhere' with a name of your choice. Correct?
Are you using Windows? If yes I may be able to help. What's the name of your file an where is it now?

STEVEHEAT
Posts: 12
Joined: 09.04.2018, 22:48

Re: beginner needs advice

Post by STEVEHEAT » 13.04.2018, 09:26

Yes I used save as but have now saved it as plan.xml and overwritten the existing, I have used the health check and corrected the overlayed objects and the plan is now healthy, have used analyser and getting a these for some of blocks
Loop route (Source == Destination) bk012- to bk012+. Check your plan

trying to work out what I am supposed to do to correct

Its not that I am not trying to read the guides its finding the right section and also knowing your on the right section

I am also getting

ANALYSER: max. recursion depth (101 > 100) reached

which I assume is some sort of limit which I hope will get better as I fix any problems

STEVEHEAT
Posts: 12
Joined: 09.04.2018, 22:48

Re: beginner needs advice

Post by STEVEHEAT » 13.04.2018, 09:31

I Have not as yet given the switches any addresses as yet which are coming up as warnings would this make any difference to the above

rjversluis
Site Admin
Posts: 41610
Joined: 10.04.2006, 08:48
Location: Speyer, Germany
Contact:

Re: beginner needs advice

Post by rjversluis » 13.04.2018, 09:37

STEVEHEAT wrote: ANALYSER: max. recursion depth (101 > 100) reached
this means you have more then 100, mostly useless, track objects between two blocks. Or just no blocks in your plan... -o -o -o
http://wiki.rocrail.net/doku.php?id=goldenrules-en

Besra
Moderator
Posts: 3749
Joined: 10.08.2009, 17:54
Location: North Rhine-Westphalia, Germany

Re: beginner needs advice

Post by Besra » 13.04.2018, 09:42

Loop route (Source == Destination) bk012- to bk012+. Check your plan
The line says it all: You created a loop, source block is identical to destination block.
ANALYSER: max. recursion depth (101 > 100) reached
cf. http://wiki.rocrail.net/doku.php?id=ana ... server_log
You have too many (track) elements between some blocks (max is 100). See http://wiki.rocrail.net/doku.php?id=goldenrules-en
I Have not as yet given the switches any addresses as yet which are coming up as warnings would this make any difference to the above
No.

rjversluis
Site Admin
Posts: 41610
Joined: 10.04.2006, 08:48
Location: Speyer, Germany
Contact:

Re: beginner needs advice

Post by rjversluis » 13.04.2018, 09:44

Hi Bernd,

it seems he just do not want to reed the "First Steps".
I'm out of this thread.

STEVEHEAT
Posts: 12
Joined: 09.04.2018, 22:48

Re: beginner needs advice

Post by STEVEHEAT » 13.04.2018, 09:59

I am trying as best i can and would like to thank you all for your help but don't think i will ask any further questions

Post Reply

Return to “General”