location[Lillviken] has no blocks defined

Post Reply
lgrfbs
Posts: 75
Joined: 11.07.2016, 14:57
Location: Sweden
Contact:

location[Lillviken] has no blocks defined

Post by lgrfbs » 28.12.2018, 02:08

Rocrail version:
RocRail20181228.png

Code: Select all

01:49:24 analyzer skipped see previous lines.
01:49:24 This plan is not healthy.
01:49:24 Plan is NOT healthty. See previous ERROR lines.
01:49:24 location check: 4 problematic entries
01:49:24 ERROR: location[Granholmen] has no blocks defined
01:49:24 ERROR: location[Lillviken] has no blocks defined
01:49:24 ERROR: location[Magasinet] has no blocks defined
01:49:24 ERROR: location[Höjersvik] has no blocks defined
If this problem has already been discussed "1000 Times " I apologize that in that case I missed that page with the solution, if so, please give me the link and I will read it.
If there is no previous solution, how do I proceed to resolve this error?
You do not have the required permissions to view the files attached to this post.

RainerK
Moderator
Posts: 4077
Joined: 29.04.2009, 09:31
Location: Sprockhövel (zwischen BO u. W)
Contact:

Re: location[Lillviken] has no blocks defined

Post by RainerK » 28.12.2018, 03:36

Hi nameless rocrail user,

You need to assign blocks to the locations with the errors in the trace file.
Please look in this wiki page: https://wiki.rocrail.net/doku.php?id=locations-def-en
There You need to select the location to be worked on.
Then change to tab "Blocks" described on this page: https://wiki.rocrail.net/doku.php?id=locations-block-en

BTW: The screenshot of "Rocrail version" in Your post is dispensable load
because the information is also included in the plan file and in the trace file of Rocrail startup.

Post Reply

Return to “General”