ORD-3 24V DC Power Supply

RocNet(RaspberryPi), mergCBUS and LocoNet based hardware developed by Peter Giling. (GCA)
Documentation: http://wiki.rocrail.net/doku.php?id=english#hardware
Order information: http://wiki.rocrail.net/doku.php?id=gca:gca-index-en/

ORD-3 24V DC Power Supply

Postby Merdeka » 25.08.2017, 01:06

Hi,

According to the specs, the ORD-3 can be supplied with DC power.
- Wide power input range: 16-20V ac / 19-30V dc, due to the use of switching power supply.

If I would use a 24v DC power supply would I need a 2.5A (60w) or 5A (120w)?

Thanks,

Timo
Merdeka
 

Re: ORD-3 24V DC Power Supply

Postby RedTrain » 07.09.2017, 21:28

Hi Timo

If you want to use the ORD-3 with 3 Amps, I would recommend the larger supply. In the 1 Amp position, the smaller would be OK.
Beste Grüsse / kind regards - Carlo

[H0m 2L DCC] Layout "Rhaetian Flyer" Swiss Proto-Freelance RhB+FO+zB; 6% completed, partly operational
W10, Ubuntu 16.04, Rocweb, andRoc; CANbus GC1e, GC3-ORD3, GC2, GC6; Bemo, Peco, handlaid;
RedTrain
 


Return to GCA (Hardware by Peter Giling)