[doc] Using Dinamo OC32 To Control Aspect Signals

Post Reply
mgxtreme
Posts: 84
Joined: 02.03.2016, 23:01

[doc] Using Dinamo OC32 To Control Aspect Signals

Post by mgxtreme » 09.04.2018, 08:43

All

Through a great deal of trial and error I eventually got a Dinamo OC32 to control my aspect signals on my layout.

The attached document on this post maybe helpful to other who maybe trying to get this configuration working.

Regards

Rob
You do not have the required permissions to view the files attached to this post.

rjversluis
Site Admin
Posts: 42335
Joined: 10.04.2006, 08:48
Location: Speyer, Germany
Contact:

Re: Using Dinamo OC32 To Control Aspect Signals

Post by rjversluis » 09.04.2018, 09:19

Thanks Rob,

I added this document into the Wiki if its OK with you.
http://wiki.rocrail.net/doku.php?id=din ... en#signals

mgxtreme
Posts: 84
Joined: 02.03.2016, 23:01

Re: Using Dinamo OC32 To Control Aspect Signals

Post by mgxtreme » 09.04.2018, 09:45

Hi Rob

That is fine with me :D

If I ever get my DR5088RC working properly (as per one of my other threads) I will also document that setup in a similar manner and upload that document also, if that is of any help. The same goes for the OC32NG and using that with turnout motors also, I will document that also.

if you want the original word version of the PDF above I can post/send that also if you wish.

Regards

Rob

Post Reply

Return to “Signal Systems”