10806 10807 - Z21 BOOSTER

Post Reply
andrey
Posts: 152
Joined: 11.01.2016, 11:47
Location: Беларусь
Contact:

10806 10807 - Z21 BOOSTER

Post by andrey » 17.01.2019, 17:40


rjversluis
Site Admin
Posts: 42034
Joined: 10.04.2006, 08:48
Location: Speyer, Germany
Contact:

Re: 10806 10807 - Z21 BOOSTER

Post by rjversluis » 17.01.2019, 18:51

Hi Andrey,

why this information?
Relevant for Rocrail? Or just advertising?

It could be of interest if those new boosters would report their voltage/current/temp. over CAN.

andrey
Posts: 152
Joined: 11.01.2016, 11:47
Location: Беларусь
Contact:

Re: 10806 10807 - Z21 BOOSTER

Post by andrey » 17.01.2019, 20:39

rjversluis wrote:
17.01.2019, 18:51
Hi Andrey,

why this information?
Relevant for Rocrail? Or just advertising?

It could be of interest if those new boosters would report their voltage/current/temp. over CAN.
Hi Rob.
Detailed instructions for this equipment appeared recently on the site. On sale noverovo search is not.
Perhaps the users of your software, after reading the instructions, will have a desire to equip their layouts with these boosters. After this, it will be possible to find out the operation of this equipment by CAN.

andrey
Posts: 152
Joined: 11.01.2016, 11:47
Location: Беларусь
Contact:

Re: 10806 10807 - Z21 BOOSTER

Post by andrey » 19.02.2019, 18:30

In the new boosters from ROCO 10806 and 10807, information on the voltage and load in Z21 via CAN is provided, followed by reflection in the KC control program (see screenshot).
But the owners of this know that in addition to this, the heating temperature of the Z21 itself is also displayed. Booster heating temperatures in the program Z21 no. In this regard, wrote to ROCO. Interest in this was due to the promising possibility of displaying such information on each booster in Rocrail. The answer came:

Sehr geehrter ....,

Wir haben ihr Anliegen an die zuständige Entwicklungsabteilung weitergeleitet. Vorab möchten wir sie dahingehend informieren, dass eine regelmäßige Übertragung der Temperatur beim ZCAN20-Protokoll nicht vorgesehen ist.

Es tut uns leid hier keine besseren Nachrichten zu haben.

Wir danken für Ihr Verständnis und wünschen Ihnen auch weiterhin viel Vergnügen mit Ihrem Hobby, der Modelleisenbahn.

Mit freundlichen Grüßen

________________________________________________________________________________
After Sales Department
Roco Customer Service

Fleischmann | Roco
Modelleisenbahn München GmbH Branch Austria

Plainbachstrasse 4
5101 Bergheim
Austria

Register of Companies: Salzburg FN 321881f
Registered Office: Bergheim
General Manager: Tassilo Gruber, Rupert Schiefer

Modelleisenbahn München GmbH
Kronstadter Straße 4
81677 München
Germany

Register of Companies: München HBR 159908
Registered Office: München
General Manager: Tassilo Gruber, Rupert Schiefer

Hotline DE-AT-CH | Phone: 00800 57626000
Hotline International | Phone: +43 820 200 668
E-Mail: roco@roco.cc | www.modelleisenbahn-muenchen.com
You do not have the required permissions to view the files attached to this post.

Post Reply

Return to “Roco”