[opgelost] SPROG Loc rijdt niet

[opgelost] SPROG Loc rijdt niet

Postby eporocrail » 14.03.2015, 10:21

Hi Rob,

Decoder ingebouwd. Vanuit sprog throttle rijdt de loc op de testbaan. Licht schakelt aan en uit.

Vanuit rocrail schakelt licht aan en uit maar de loc rijdt niet.

Uiteraard diverse settings geprobeerd maar kennelijk staat er ergens nog iets verkeerd?????
You do not have the required permissions to view the files attached to this post.
Kind regards Ellard.
Scale N Peco Code 55, WiFi Eltraco for sensing and switching, DCC++ on Arduino Nano for driving, ROCRAIL server on Raspi
eporocrail
 

Re: SPROG Loc rijdt niet

Postby rjversluis » 14.03.2015, 11:14

Hi,

toevallig had ik ook nog een Sprog 3 liggen en het werkt direct:

Code: Select all
20150314.111143.534 r9999c sprogrx  OSprog   0951 SPROG read: [SPROG 3 Ver 2.5]
20150314.111143.593 r9999c sprogrx  OSprog   0951 SPROG read: [P> ]
20150314.111143.799 r9999c sprogrx  OSprog   0951 SPROG read: [SPROG 3 Ver 2.5]
20150314.111154.774 r9999I cconmngr OClntCon 0395 client connect count: 1
20150314.111154.774 r9999I cmdrE9E0 OClntCon 0215 cmdReader started for:127.0.0.1.
20150314.111154.774 r9999I infwE9E0 OClntCon 0109 infoWriter started for:127.0.0.1.
20150314.111155.778 r9999I cmdrE9E0 OClntCon 0271 monitoring for client is on
20150314.111155.778 r9999I cmdrE9E0 OControl 1056 command from [rocview,293107392,71897]
20150314.111155.779 r9999I cmdrE9E0 OSystem  0575 expdate = 28-11-2015
20150314.111155.779 r9999I cmdrE9E0 OModel   2346 valid donation key:
20150314.111155.858 r9999I cmdrE9E0 OModel   2412 Sending 0 fstats to client...
20150314.111226.185 r9999I cmdrE9E0 OModel   0670 adding lc NS2404...
20150314.111226.187 r9999I cmdrE9E0 OLoc     4149 no restore wanted: reset speed for loco [NS2404]
20150314.111226.187 r9999I cmdrE9E0 OLoc     4153 no restore wanted: reset functions for loco [NS2404]
20150314.111226.189 r9999I cmdrE9E0 OLcDrive 0718 LcDriver 2.0.0 loaded for NS2404
20150314.111226.189 r9999I cmdrE9E0 OLoc     4173 loco [NS2404] enterside=[+]
20150314.111226.190 r9999I cmdrE9E0 OModel   0962 new item added lc NS2404
20150314.111226.690 r9999I NS2404   OLoc     2027 Runner for "NS2404" started.
20150314.111230.140 r9999c cmdrE9E0 OSprog   0366 Power ON
20150314.111230.146 r9999I cmdrE9E0 OModel   2209 informing 2 listeners of a system event name=sys val=go...
20150314.111232.953 r9999c cmdrE9E0 OSprog   0539 Loco command for address 2404
20150314.111232.953 r9999c cmdrE9E0 OSprog   0547 Loco slot=0
20150314.111232.954 r9999c cmdrE9E0 OSprog   0567 slot=0 addr=2404 V=12 steps=128 dir=1 long=1
20150314.111236.406 r9999c cmdrE9E0 OSprog   0539 Loco command for address 2404
20150314.111236.406 r9999c cmdrE9E0 OSprog   0547 Loco slot=0
20150314.111236.407 r9999c cmdrE9E0 OSprog   0567 slot=0 addr=2404 V=12 steps=128 dir=0 long=1
20150314.111238.624 r9999c cmdrE9E0 OSprog   0539 Loco command for address 2404
20150314.111238.624 r9999c cmdrE9E0 OSprog   0547 Loco slot=0
20150314.111238.625 r9999c cmdrE9E0 OSprog   0567 slot=0 addr=2404 V=0 steps=128 dir=0 long=1


In de loc zit een Lenz Standaard decoder.
You do not have the required permissions to view the files attached to this post.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Re: SPROG Loc rijdt niet

Postby eporocrail » 14.03.2015, 13:30

Hi Rob,

Its magic! Het werkt zonder dat ik iets veranderd heb.

Prettig weekend.

Ellard
Kind regards Ellard.
Scale N Peco Code 55, WiFi Eltraco for sensing and switching, DCC++ on Arduino Nano for driving, ROCRAIL server on Raspi
eporocrail
 


Return to Centrales (NL)