ricominciamo da capo

andez8
Posts: 92
Joined: 03.03.2008, 10:21
Location: Pistoia - Italia
Contact:

Re: ricominciamo da capo

Post by andez8 » 01.09.2016, 16:03

hello Tom,
it's all right, anyway thanks,
my best regards, andrea

andez8
Posts: 92
Joined: 03.03.2008, 10:21
Location: Pistoia - Italia
Contact:

Re: ricominciamo da capo

Post by andez8 » 01.09.2016, 19:01

hello Tom,
my central station is like Roco (but better)
it's all right, anyway thanks,
my best regards, andrea

andez8
Posts: 92
Joined: 03.03.2008, 10:21
Location: Pistoia - Italia
Contact:

Re: ricominciamo da capo

Post by andez8 » 01.09.2016, 19:05

ciao di nuovo,
questo tracciato è un estratto (una semplificazione) di quello completo
giusto per provare e veder girare i treni
un saluto, andrea
You do not have the required permissions to view the files attached to this post.

eroncelli
Posts: 350
Joined: 11.01.2009, 19:09
Location: Bergamo - Italy

Re: ricominciamo da capo

Post by eroncelli » 04.09.2016, 06:46

Usa sempre la funzione "issue": solo così possiamo vedere il tuo sistema !!
http://wiki.rocrail.net/doku.php?id=issue-it

andez8
Posts: 92
Joined: 03.03.2008, 10:21
Location: Pistoia - Italia
Contact:

Re: ricominciamo da capo

Post by andez8 » 08.09.2016, 16:39

ciao,
dopo varie correzzioni / aggiustamenti e variarioni il plan9 (ovvero il tracciato completo) sembra funzionare. !!!
almeno nella modalità semiautomatica, ovvero : imposta destinazione ed avvia loco (da blocco a blocco);
ho fatto tanti tentativi ma non ho ancora capito bene come funzionano i blocchi + e - (inverti senso)
bhé un passo avanti lo ho fatto e vi ringrazio
saluti andrea

eroncelli
Posts: 350
Joined: 11.01.2009, 19:09
Location: Bergamo - Italy

Re: ricominciamo da capo

Post by eroncelli » 08.09.2016, 21:40

Vediamo il senso dei blocchi (ovvero il + ed il -)
Poniamo che il blocco abbia 2 sensori (A e B): per saper quale dei 2 deve fungere da "enter" devi sapere da che parte si entra nel blocco e quindi ecco il senso del +/-.
Tutto qui, solo questione di logica (è un computer).

andez8
Posts: 92
Joined: 03.03.2008, 10:21
Location: Pistoia - Italia
Contact:

Re: ricominciamo da capo

Post by andez8 » 24.09.2016, 08:24

ciao eroncelli, ciao Tom,
ieri sera, non so per quale motivo,
sul circuito basso del mio layout (quello non in salute e postato quì,
ha funzionato tutto.! ! !
era uno spettacolo vedere i treni arrivare e partire ed incrociarsi senza problemi.
grazie a tutti, andrea

andez8
Posts: 92
Joined: 03.03.2008, 10:21
Location: Pistoia - Italia
Contact:

Re: ricominciamo da capo

Post by andez8 » 25.09.2016, 05:31

ciaa a tutti duìi nuovo,
scuasate se vi disturbo ancora.
cosa significano queste scritte in rosso che mi da "analyrer"?

06:20:22 analyzer skipped see previous lines.
06:20:22 This plan is not healthy.
06:20:22 Plan is NOT healthty. See previous ERROR lines.
06:20:22 zlevel check: 257 problems
06:20:22 zlevel check: 3 warnings
06:20:22 ERROR: visible item[tx] id[tx20091226185858710] on invalid z level [1]
06:20:22 ERROR: visible item[tx] id[tx20081228230323712] on invalid z level [5]
06:20:22 ERROR: visible item[tk] id[tk20080215180130920] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180129029] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180128528] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180128897] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180127096] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180126475] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180126644] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180125783] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180124951] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180123461] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180122329] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180122618] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180121927] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180120986] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180119435] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180119914] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180118383] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180117721] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180116970] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180115868] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180114907] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180113306] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180112315] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180112784] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180111923] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180110272] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180110791] on invalid z level [1]
06:20:22 ERROR: visible item[tk] id[tk20080215180109320] on invalid z level [1]
06:20:21 ERROR: visible item[tk] id[tk20080215180109810] on invalid z level [1]
06:20:21 ERROR: visible item[tk] id[tk20080215180108259] on invalid z level [1]
06:20:21 ERROR: visible item[tk] id[tk20080215180107358] on invalid z level [1]
06:20:21 ERROR: visible item[tk] id[tk20080215180107797] on invalid z level [1]
06:20:21 ERROR: visible item[tk] id[tk20080215180106276] on invalid z level [1]
06:20:21 ERROR: visible item[tk] id[tk20080215180106765] on invalid z level [1]
06:20:21 ERROR: visible item[tk] id[tk20080215180105275] on invalid z level [1]
06:20:21 ERROR: visible item[tk] id[tk20080215180105594] on invalid z level [1]
06:20:21 ERROR: visible item[tk] id[tk20080215180104973] on invalid z level [1]
06:20:21 ERROR: visible item[tk] id[tk20080215180103522] on invalid z level [1]
06:20:21 ERROR: visible item[tk] id[tk20080215180103811] on invalid z level [1]
06:20:21 ERROR: visible item[tk] id[tk20080215180102310] on invalid z level [1]
06:20:21 ERROR: visible item[tk] id[tk20080215180102790] on invalid z level [1]
06:20:21 ERROR: visible item[tk] id[tk20080215180101189] on invalid z level [1]
06:20:21 ERROR: visible item[tk] id[tk20080215180101578] on invalid z level [1]
06:20:21 ERROR: visible item[tk] id[tk20080215180100897] on invalid z level [1]
06:20:21 ERROR: visible item[tk] id[tk20080215180058315] on invalid z level [1]
06:20:21 ERROR: visible item[tk] id[tk20080215180028251] on invalid z level [1]
06:20:21 ERROR: visible item[tk] id[tk20080215180028580] on invalid z level [1]
06:20:21 ERROR

sono sovrascrizioni del mio layout? dove devo andare per cancellarle ?? come faccio a cancellarle ???
oppure ignoro ???
grazie ancora, cordiali salluti andrea

LDG
Site Admin
Posts: 2701
Joined: 18.10.2010, 00:03
Location: near Karlsruhe/Germany

Re: ricominciamo da capo

Post by LDG » 25.09.2016, 13:42

Hello Andrea,

sorry for writing in english.

You deleted some levels but not the content of that levels. How to fix this:

Rocview: "Panello traciato"/"Aggiungi panello..."
Nome: dummy1
Livello: 1
"OK"

Select new level "dummy1"

Rocview: "Panello traciato"/"Modifica panello..."
right click with mouse on an empty element and delect last entry: "Elimina panello traciato"
-> "Sei sicuro di volero cancellare" : -> "Yes/Si"
-> "Cancellare tutti i binari collegati a quetso livello?" : -> "Yes/Si"

Do the same with a level (Livello) 5.

Regards,
Lothar

eroncelli
Posts: 350
Joined: 11.01.2009, 19:09
Location: Bergamo - Italy

Re: ricominciamo da capo

Post by eroncelli » 27.09.2016, 13:22

La risposta di Lothar, anche se è parzialmente in inglese, mi sembra chiara: se hai dubbi, chiedi ancora.

andez8
Posts: 92
Joined: 03.03.2008, 10:21
Location: Pistoia - Italia
Contact:

Re: ricominciamo da capo

Post by andez8 » 27.09.2016, 21:13

ciao,
ecco quello che sono riuscito a fare :
You do not have the required permissions to view the files attached to this post.

andez8
Posts: 92
Joined: 03.03.2008, 10:21
Location: Pistoia - Italia
Contact:

Re: ricominciamo da capo

Post by andez8 » 27.09.2016, 21:33

anche questo :
22:27:43 issue [plan non in health] created in directory: [C:\Users\Andrea\Documents\RocRail_plan09_-_1.1.16\issues\plan_non_in_health]
22:24:41 analyzer skipped see previous lines.
22:24:41 This plan is not healthy.
22:24:41 Plan is NOT healthty. See previous ERROR lines.
22:24:41 zlevel check: 3 warnings
22:24:41 WARNING: definition of level[0] title[piano 0] is following level[0] title[livello 1] (first definition is valid)
22:24:41 WARNING: definition of level[0] title[piano 0] is following level[0] title[Ande.Z_9 plain] (first definition is valid)
22:24:41 WARNING: definition of level[0] title[livello 1] is following level[0] title[Ande.Z_9 plain] (first definition is valid)
22:24:41 ERROR: plan position[3-13-0] object[tx] id[tx20120120153827293] overlaps object[sw] id[cross_1]
22:24:41 ERROR: plan position[19-5-0] object[tx] id[tx20110103153557798] overlaps object[tx] id[tx20091226231704866]
22:24:41 ERROR: plan position[15-15-0] object[tx] id[tx20110103150919680] overlaps object[tk] id[tk20091226200508269]
22:24:41 ERROR: plan position[15-15-0] object[tx] id[tx20110103150842559] overlaps object[tk] id[tk20091226200508269]
22:24:41 ERROR: plan position[7-18-0] object[tx] id[tx20090624191133510] overlaps object[tk] id[tk20080211221335508]
22:24:41 ERROR: plan position[3-9-0] object[tx] id[tx20090121215637332] overlaps object[bk] id[b.15-1]
22:24:41 ERROR: plan position[1-6-0] object[tx] id[tx20081231201748127] overlaps object[tk] id[tk20151220145623347]
22:24:41 ERROR: plan position[65-41-0] object[tk] id[tk20160828130716117] overlaps object[tk] id[tk20160828130715285]
22:24:41 ERROR: plan position[9-19-0] object[tk] id[tk20091213190905699] overlaps object[tk] id[tk20080211223624815]
22:24:41 ERROR: plan position[1-16-0] object[tk] id[tk20151220151332898] overlaps object[tk] id[tk20151220151106434]
22:24:41 ERROR: plan position[0-14-0] object[tk] id[tk20110216160309886] overlaps object[tk] id[tk20120120160553970]
22:24:41 WARNING: signal s. 01 has no primary address set
22:24:41 ERROR: loco FS Gr 893 has no address set
22:24:41 ERROR: loco FS Gr 421 has no address set
22:24:41 WARNING: switch sc45_C has no address set
22:24:41 WARNING: switch sc.04a has no address set
22:24:41 WARNING: switch sc.39b_(B) has no address set
22:24:41 WARNING: switch sc 43a_(B) has no address set
22:24:41 WARNING: switch gh has no address set
22:24:41 WARNING: switch sc 39a_(B) has no address set
22:24:41 switch sc 38a_(B) has an already used address 2-1 by sc 37_(B) (aMapKey=2-1-1-0-1-KDCCX-GenLi-0-)
22:24:41 WARNING: switch sc 15 has no address set
22:24:41 switch test has an already used address 0-1 by sc 06 (aMapKey=0-1-0-0-1-KDCCX-GenLi-0-)

di nuovo grazie, andrea

eroncelli
Posts: 350
Joined: 11.01.2009, 19:09
Location: Bergamo - Italy

Re: ricominciamo da capo

Post by eroncelli » 28.09.2016, 06:19

Hai questi errori:
1) alcuni simboli sono sovrapposti
2) alcune loco non hanno indirizzo
3) idem per scambi etc

Non mi è chiaro il primo tipo di "warning": dovrebbe essere un "doppio nome" dato ai livelli (però funziona lo stresso e ti dice che applica il primo nome)

LDG
Site Admin
Posts: 2701
Joined: 18.10.2010, 00:03
Location: near Karlsruhe/Germany

Re: ricominciamo da capo

Post by LDG » 28.09.2016, 06:38

Hello,
eroncelli wrote:Hai questi errori:
1) alcuni simboli sono sovrapposti
2) alcune loco non hanno indirizzo
3) idem per scambi etc
ERRORs have to be solved/removed. WARNING and INFO are not so important but should be removed in further steps.
eroncelli wrote:Non mi è chiaro il primo tipo di "warning": dovrebbe essere un "doppio nome" dato ai livelli (però funziona lo stresso e ti dice che applica il primo nome)
Naming of level 0 is located multiple times in "plan_09 Rocrail-Andez8.xml" (renamed plan.xml by Andrea). Only the first name is shown.
Use "Clean basic problems on all items". Do not forget to restart Rocrail server twice as mentioned on the base of that page.

Regards,
Lothar

andez8
Posts: 92
Joined: 03.03.2008, 10:21
Location: Pistoia - Italia
Contact:

Re: ricominciamo da capo

Post by andez8 » 01.10.2016, 08:23

hello to all,
also again thank for your advices,
sorry but this last time i didin't understand the procedure to remove the last errors:
<< Naming of level 0 is located multiple times in "plan_09 Rocrail-Andez8.xml" (renamed plan.xml by Andrea). Only the first name is shown.
Use "Clean basic problems on all items". Do not forget to restart Rocrail server twice as mentioned on the base of that page. >>
<< This plan is not healthy.
22:24:41 Plan is NOT healthty. See previous ERROR lines.
22:24:41 zlevel check: 3 warnings
22:24:41 WARNING: definition of level[0] title[piano 0] is following level[0] title[livello 1] (first definition is valid)
22:24:41 WARNING: definition of level[0] title[piano 0] is following level[0] title[Ande.Z_9 plain] (first definition is valid)
22:24:41 WARNING: definition of level[0] title[livello 1] is following level[0] title[Ande.Z_9 plain] (first definition is valid)
22:24:41 ERROR: plan position[3-13-0] object[tx] id[tx20120120153827293] overlaps object[sw] id[cross_1]
22:24:41 ERROR: plan position[19-5-0] object[tx] id[tx20110103153557798] overlaps object[tx] id[tx20091226231704866]
22:24:41 ERROR: plan position[15-15-0] object[tx] id[tx20110103150919680] overlaps object[tk] id[tk20091226200508269]
22:24:41 ERROR: plan position[15-15-0] object[tx] id[tx20110103150842559] overlaps object[tk] id[tk20091226200508269]
22:24:41 ERROR: plan position[7-18-0] object[tx] id[tx20090624191133510] overlaps object[tk] id[tk20080211221335508]
22:24:41 ERROR: plan position[3-9-0] object[tx] id[tx20090121215637332] overlaps object[bk] id[b.15-1]
22:24:41 ERROR: plan position[1-6-0] object[tx] id[tx20081231201748127] overlaps object[tk] id[tk20151220145623347]
22:24:41 ERROR: plan position[65-41-0] object[tk] id[tk20160828130716117] overlaps object[tk] id[tk20160828130715285]
22:24:41 ERROR: plan position[9-19-0] object[tk] id[tk20091213190905699] overlaps object[tk] id[tk20080211223624815]
22:24:41 ERROR: plan position[1-16-0] object[tk] id[tk20151220151332898] overlaps object[tk] id[tk20151220151106434]
22:24:41 ERROR: plan position[0-14-0] object[tk] id[tk20110216160309886] overlaps object[tk] id[tk20120120160553970]
22:24:41 WARNING: signal s. 01 has no primary address set
22:24:41 ERROR: loco FS Gr 893 has no address set
22:24:41 ERROR: loco FS Gr 421 has no address set
22:24:41 WARNING: switch sc45_C has no address set
22:24:41 WARNING: switch sc.04a has no address set
22:24:41 WARNING: switch sc.39b_(B) has no address set
22:24:41 WARNING: switch sc 43a_(B) has no address set
22:24:41 WARNING: switch gh has no address set
22:24:41 WARNING: switch sc 39a_(B) has no address set
22:24:41 switch sc 38a_(B) has an already used address 2-1 by sc 37_(B) (aMapKey=2-1-1-0-1-KDCCX-GenLi-0-)
22:24:41 WARNING: switch sc 15 has no address set
22:24:41 switch test has an already used address 0-1 by sc 06 (aMapKey=0-1-0-0-1-KDCCX-GenLi-0-) >>
again thank and regards, andrea

Post Reply

Return to “Modalità automatica (IT)”