Rocrail sources access.

Questions and discussions around compiling of Rocrail, usage of wxWidgets etc.

Moderators: dadolphs, Moderators

Rocrail sources access.

Postby rjversluis » 08.09.2015, 06:25

Hi,

the GitBlit Server already runs and looks good.
I will switch to this and if you need direct source access you can post it here.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Re: Rocrail sources access.

Postby Liviu M » 08.09.2015, 08:06

Hello Rob,

I'm using Rocrail with openSUSE/Raspberry Pi. If you think I'm trustworthy, I'll appreciate having access to the sources.

Best regards,
Liviu
----------------------------------------------
System: DCC N-Scale
CS: Profiboss (Loconet)
Server: RaspberryPi/OdroidC1/OpenSuse
Client: OpenSuse/Windows(?)
----------------------------------------------
Liviu M
 

Re: Rocrail sources access.

Postby woodyboy » 08.09.2015, 08:17

Hi Rob,

This looks a smart solution to gain controlled access. I would like to have access to the sources to test my contributions :coding: with the last branch.

Edit: Working like a charm! Thanks.
Last edited by woodyboy on 08.09.2015, 18:54, edited 1 time in total.
Regards,

Bert

Equipment: Roco WLANMaus, MS2, Gleisbox 2x(separated switch & rollingstock). Ubuntu 16. Edits booster. Arduino: S88 CANbus interface & Ethernet-CANbus gateway
woodyboy
 

Re: Rocrail sources access.

Postby eporocrail » 08.09.2015, 10:52

Hi Rob,

This is to react on the message i received. I would like to have access.
Kind regards Ellard.
Scale N Peco Code 55, WiFi Eltraco for sensing and switching, DCC++ on Arduino Nano for driving, ROCRAIL server on Raspi
eporocrail
 

Re: Rocrail sources access.

Postby thera » 08.09.2015, 11:00

Hi Rob,

as I've said in german forum, I'll be happy if you trust me and provide access to source code to maintain local personal changes compiled in RasPi and Ubuntu.

Thanks in advance.
Best Regards
Tomás
-------------------------------------------------------------------------------------------
N-Gauge
Rocrail Server on RasPi
XPressNet & I2C DIY Devices (CTC & Field actuators)
NanoX-S88 CS
thera
 

Re: Rocrail sources access.

Postby Richard-TX » 08.09.2015, 13:47

Rob,

I need access to the source tree

rich
Richard
Dallas/Fort Worth
Texas USA
Richard-TX
 

Re: Rocrail sources access.

Postby rjversluis » 08.09.2015, 15:02

Hi all,

please do **not** publish in this Forum the SourceCode URL.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Re: Rocrail sources access.

Postby mserrano » 09.09.2015, 20:16

Hi Rob,

I would also need access to the code. As you know I use rocrail with the rpi, not only as a server, so I do compile rocwin at the rpi. Moreover, I am currently thinking in moving to arch linux.

Thanks in advance,

Manolo
mserrano
 

Re: Rocrail sources access.

Postby ech » 10.09.2015, 12:31

Hi Rob,

I would also like to have access to the code. I use rocrail on Ubuntu 15.04 and compile it myself.
I am looking everyday to the changes and find the project very nice, every day I checked ¨Rocrail Revisions Information¨ to see what is going on on Rocrail.
It is really a pitty that that info is not accessible anymore (even checked those page with my phone now an then...)

Could you allow me to git pull on the project? Username for 'https://github.com': is that the same as the username on the forum?
Thanks in advance,
kind regards,
Enzo
ech
 

Re: Rocrail sources access.

Postby roco007 » 10.09.2015, 17:53

Hi Rob

I am very happy with Rocrail, I am using it on a RaPi running the server and rocview on a Ubuntu 64bit 14.04 LTS machine. Additionally I am running androc (I am aware that this part is not developed anymore) and rocweb on my tablet. Maybe that I am stupid but I would like to stay up to date with the development of rocrail and rocview and would like to take advanteges of new developments as soon as possible. To do so I have up to now build rocrail from source on a RasPi and under Ubuntu 14.04. To do so I have created a cron-scipts on the computers running "git update" to get the source, to compile the program, to create deb-packages and to submit them to my private repository, of course that one is not accessible from the internet. This procedure has provide me a very comfortable way to keep my installations up to date.
With the password-protected source code git archive I have lost this possibility.
I have to mention that I am not a developer, doing programming on that level is far above my capabilities. Even without the source code access I am happy with rocrail. I have also missed the reason for the change if it has been discussed or mentioned public, of course its your work, I honour it and I have no right, no legitimation, to question that decision.
Nevertheless I would be happy to get again access to the source code if possible.

Thanks a lot for your great work with rocrail & co.

Best regards

Uli

ps.: If it is of interest for anybody else I have attached my script to compile rocrail.
You do not have the required permissions to view the files attached to this post.
Roco H0, BiDiB mit Roco-Multimaus und Roco-Wlan-Multimaus, Rocrail auf Raspberry Pi 3 B, Rocview auf (X)Ubuntu 18.04 LTS 64 bit, andRoc und Rocweb am Tablet
roco007
 

Re: Rocrail sources access.

Postby Open » 10.09.2015, 20:29

Hi Rob,

I´d like to update my Raspberry via git. Is it possible to get success? Would be great.

Marco
Open
 

Re: Rocrail sources access.

Postby Couchpotato » 10.09.2015, 22:27

Hello Rob,
i would also like to have access to the source, because looking for whats going on, what you have changed and so on. Sometimes two eyes more are good.
You know, that i'm not evil! 8) :rr_cap:
Grüße von der CouchPotato (Ralph)
Lenz LZ100 V2.3 (uralt), LH100, LI100 Prolific-USB
Rautenhaus SLX852, SLX816, SLX815, Digitus-USB
Tams MC, padRoc, andRoc, iRoc
Meine Teppichbahn-Videos:
http://vimeo.com/user10112730
Couchpotato
 

Re: Rocrail sources access.

Postby rjversluis » 11.09.2015, 06:19

Hi Ralph,
Couchpotato wrote:Hello Rob,
i would also like to have access to the source, because looking for whats going on, what you have changed and so on. Sometimes two eyes more are good.
You know, that i'm not evil! 8) :rr_cap:

changes are public:
http://rocrail.net/software/rocrail-snapshot/log.txt
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Re: Rocrail sources access.

Postby Couchpotato » 11.09.2015, 08:11

rjversluis wrote:Hi Ralph,
Couchpotato wrote:Hello Rob,
i would also like to have access to the source, because looking for whats going on, what you have changed and so on. Sometimes two eyes more are good.
You know, that i'm not evil! 8) :rr_cap:

changes are public:
http://rocrail.net/software/rocrail-snapshot/log.txt
Hi Rob,
I've seen that.
But from time to time i look in the source what you have changed in detail. Do you remember that i showed you a bug in the xpressnet-library some years ago?
Grüße von der CouchPotato (Ralph)
Lenz LZ100 V2.3 (uralt), LH100, LI100 Prolific-USB
Rautenhaus SLX852, SLX816, SLX815, Digitus-USB
Tams MC, padRoc, andRoc, iRoc
Meine Teppichbahn-Videos:
http://vimeo.com/user10112730
Couchpotato
 

Re: Rocrail sources access.

Postby rjversluis » 11.09.2015, 08:56

Hi Ralph,

its on its way.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Next

Return to Building & Compiling