[Fixed] No LONG click in Rocweb and xs?

All about the Rocrail WEB solution.

[Fixed] No LONG click in Rocweb and xs?

Postby rvooyen » 05.10.2016, 13:16

Hi,

I have been trying Rocweb and XS lately and nearly all functions work as expected (of course) however,
on all platforms I have tried (multiple smart phones and PC) and using either Firefox or Chrome the LONG CLICK seems to be lost?

The long click in the throttle window is supposed to bring up the menu to set schedules and start the loc etc.
This is not working on any of my mobile devices or PCs.

Is it gone and replaced with something else? How do I now call the loc pop-up to set a schedule in Rocweb? Wiki still mentions long clicks.

Have to use andRoc now for mobile throttle.

Robert
Last edited by rvooyen on 13.10.2016, 21:34, edited 1 time in total.
Robert van Ooijen.
Building Rhineland2. 3 levels. CS=IB1-Loconet+HSI-s88, 70 blocks, 160 sensors, 4 boosters. M&K 3rail.
Goal: Scheduled Pass. trains, "OPS" with car cards etc.. Using andRoc and Rocweb/xs throttles.
Rocrail on WinXP.
rvooyen
 

Re: [Issue] No LONG click in Rocweb and xs?

Postby rjversluis » 05.10.2016, 13:45

Hi Robert,

its not gone, and since XS, 3 months ago, there are no changes made to the source code of Rocweb.
Maybe you Rocrail install is mixed up...
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Re: [Issue] No LONG click in Rocweb and xs?

Postby rvooyen » 05.10.2016, 14:18

Rob,

I reinstalled Rocrail.
Still no long click on anything with Rocweb. IS there anything else I can try/set or provide any further info (trace)??
andRoc does do long click.
I would think it is in Rocrail since all other devices and browsers show the same loss.

Perhaps the tours change did sometjhing??

Does anyone else have this issue (no long click in Rocweb anymore)?

Robert
Robert van Ooijen.
Building Rhineland2. 3 levels. CS=IB1-Loconet+HSI-s88, 70 blocks, 160 sensors, 4 boosters. M&K 3rail.
Goal: Scheduled Pass. trains, "OPS" with car cards etc.. Using andRoc and Rocweb/xs throttles.
Rocrail on WinXP.
rvooyen
 

Re: [Issue] No LONG click in Rocweb and xs?

Postby rjversluis » 05.10.2016, 14:37

Hi,

I just tested Rocweb and XS; Long clicks still work.
The selected loco must be in a block, otherwise the long click does not work.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Re: [Issue] No LONG click in Rocweb and xs?

Postby rvooyen » 05.10.2016, 14:46

All the locs I try are in blocks because they start schedules/tours when started from Rocview.
The same locs/blocks do not give a pop-up after i touch or click the loc for a long time - nothing.

Robert
Robert van Ooijen.
Building Rhineland2. 3 levels. CS=IB1-Loconet+HSI-s88, 70 blocks, 160 sensors, 4 boosters. M&K 3rail.
Goal: Scheduled Pass. trains, "OPS" with car cards etc.. Using andRoc and Rocweb/xs throttles.
Rocrail on WinXP.
rvooyen
 

Re: [Issue] No LONG click in Rocweb and xs?

Postby rjversluis » 05.10.2016, 14:49

What can I do more then test and cannot reproduce your issue?
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Re: [Issue] No LONG click in Rocweb and xs?

Postby rvooyen » 05.10.2016, 17:38

screen1.jpg
Another test.

I loaded the standard DEMO plan. I added two scheds and a tour with the two scheds.
These work fine and GO with Tour1 works, all as expected.
See attached zip.

However
This makes no difference re long click, all mobile devices with rocweb give no reaction to long click.
(one excpetion - if I click/touch for a long time F13 is activated for some reason).

Robert
You do not have the required permissions to view the files attached to this post.
Robert van Ooijen.
Building Rhineland2. 3 levels. CS=IB1-Loconet+HSI-s88, 70 blocks, 160 sensors, 4 boosters. M&K 3rail.
Goal: Scheduled Pass. trains, "OPS" with car cards etc.. Using andRoc and Rocweb/xs throttles.
Rocrail on WinXP.
rvooyen
 

Re: [Issue] No LONG click in Rocweb and xs?

Postby rvooyen » 05.10.2016, 17:45

EUREKA!

I found it.

As soon as I delete the tour the LONG click works again!!!

So this is another issue as a result of the tours change.
Sorry Rob but I am now using Rocrail intensively for the first time in many months, so things appear!

Robert
Robert van Ooijen.
Building Rhineland2. 3 levels. CS=IB1-Loconet+HSI-s88, 70 blocks, 160 sensors, 4 boosters. M&K 3rail.
Goal: Scheduled Pass. trains, "OPS" with car cards etc.. Using andRoc and Rocweb/xs throttles.
Rocrail on WinXP.
rvooyen
 

Re: [Issue] No LONG click in Rocweb and xs?

Postby rjversluis » 06.10.2016, 08:00

Hi,

Rocweb supports the new tour format starting with Rocrail revision 11.477.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Re: [Issue] No LONG click in Rocweb and xs?

Postby rvooyen » 06.10.2016, 16:02

Tested 11478.

The long clicks are back and working.

Just one issue left - the schedule button only shows schedules and no tours.
Can the tours be added?

Thanks,

Robert
Robert van Ooijen.
Building Rhineland2. 3 levels. CS=IB1-Loconet+HSI-s88, 70 blocks, 160 sensors, 4 boosters. M&K 3rail.
Goal: Scheduled Pass. trains, "OPS" with car cards etc.. Using andRoc and Rocweb/xs throttles.
Rocrail on WinXP.
rvooyen
 

Re: [Issue] No LONG click in Rocweb and xs?

Postby rjversluis » 06.10.2016, 18:28

The tours are only listed if the first destination in the first tour schedule fitst to the current block of the loco.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Re: [Issue] No LONG click in Rocweb and xs?

Postby rvooyen » 06.10.2016, 18:56

Rob,

Most (all?) my tours start with a schedule from a location. Is this a problem?
These schedules are shown but not the tours.


Robert
Robert van Ooijen.
Building Rhineland2. 3 levels. CS=IB1-Loconet+HSI-s88, 70 blocks, 160 sensors, 4 boosters. M&K 3rail.
Goal: Scheduled Pass. trains, "OPS" with car cards etc.. Using andRoc and Rocweb/xs throttles.
Rocrail on WinXP.
rvooyen
 

Re: [Issue] No LONG click in Rocweb and xs?

Postby rvooyen » 06.10.2016, 19:34

AN example of tour not showing on XS.

Loc is in block 66 which is part of location Almere.
Almere is used in schedule ALM-EINDH. This schedule is the first schedule in Tour CommuterALM.
See attached. From Rocview the selection of a tour for the loc in block 66/location Almere, shows the CommuterALM tour.
This is a non-timed tour as before the change.
This is the only tour that start from location Almere - blocks 65 and 66.
selectTour.jpg


Hier the schedule and destinations of ALM-EINDH are shown.
Toursched.jpg


On XS only the (first) schedule is shown ALM-EINDH.
Screenshot 2016-10-06 20.12.55.jpg


The tour can be started from Rocview but not from rocweb/XS (not selectable)
Hope this helps.

Robert
You do not have the required permissions to view the files attached to this post.
Robert van Ooijen.
Building Rhineland2. 3 levels. CS=IB1-Loconet+HSI-s88, 70 blocks, 160 sensors, 4 boosters. M&K 3rail.
Goal: Scheduled Pass. trains, "OPS" with car cards etc.. Using andRoc and Rocweb/xs throttles.
Rocrail on WinXP.
rvooyen
 

Re: [Issue] No LONG click in Rocweb and xs?

Postby rjversluis » 07.10.2016, 06:32

Hi,

this is fixed in 11.479.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Re: [Issue] No LONG click in Rocweb and xs?

Postby rjversluis » 07.10.2016, 07:17

Hi Robert,

if you want to test you can replace rocweb.js with the attached file.
You do not have the required permissions to view the files attached to this post.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Next

Return to Rocweb