[Issue Fixed] Rocweb loco pop-up. Not working

All about the Rocrail WEB solution.

[Issue Fixed] Rocweb loco pop-up. Not working

Postby rvooyen » 25.07.2017, 17:51

Hi,

HELP!
Now that I am starting to use Rocweb I find that on all my mobile devices the long click loco pop-up eg for block and destination setting is not working.

I call the throttle display and select a loco. It is in a block and can be given a schedule - since I see this on Rocview.

However when I long click on the tablet/phone the only thing that happens is that the X at the top right of the loc pop-up goes bluish and nothing happens - eg no pop-up with the block info.

Can anyone help me further. It worked in the past I think, I have not used Rocweb for a long time. (I have enabled pop-ups)

This is the basis for my entire operation - mobile throttle - call loco and assign schedule - fine in andRoc now not working on any device or any browser. All show the same - just the top right X goes blue after long click!
HELP!

Thanks

Robert
Last edited by rvooyen on 26.07.2017, 15:10, edited 1 time in total.
Robert van Ooijen.
Building Rhineland2. 3 levels. CS=IB1-Loconet+HSI-s88, 70 blocks, 160 sensors, 4 boosters. M&K 3rail.
Goal: Scheduled Pass. trains, "OPS" with car cards etc.. Using andRoc and Rocweb/xs throttles.
Rocrail on WinXP.
rvooyen
 

Re: [Issue] Rocweb loco pop-up. Not working

Postby rjversluis » 26.07.2017, 08:08

This popup does not need a long click but just a short one.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Re: [Issue] Rocweb loco pop-up. Not working

Postby rvooyen » 26.07.2017, 08:31

Rob

The short click on the loc popup brings up the loc list. This works. The long click is for the destination etc menu.
The destination menu is the one that is not working ie only blue x.

Robert
Robert van Ooijen.
Building Rhineland2. 3 levels. CS=IB1-Loconet+HSI-s88, 70 blocks, 160 sensors, 4 boosters. M&K 3rail.
Goal: Scheduled Pass. trains, "OPS" with car cards etc.. Using andRoc and Rocweb/xs throttles.
Rocrail on WinXP.
rvooyen
 

Re: [Issue] Rocweb loco pop-up. Not working

Postby rjversluis » 26.07.2017, 09:48

Robert,

I just tested it and it works OK.
I published Androc 522 at Play Store.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Re: [Issue] Rocweb loco pop-up. Not working

Postby rvooyen » 26.07.2017, 10:26

Rob,

Here some pics of Rocweb. On ALL devices PC and mobile the same thing occurs.

Short click on the loc and the loc list is correctly shown.
Long click (hold) on the loc and the X goes blue (top right) and nothing happens. (PC's and mobiles!)

Is it some system setting?
Here example taken from PC screen.

rocweb1.jpg
The loc.
rocweb2.jpg
After short click the loc list is shown correctly.
rocweb3.jpg
After long click only the top right X goes blue - nothing happens

Robert
You do not have the required permissions to view the files attached to this post.
Robert van Ooijen.
Building Rhineland2. 3 levels. CS=IB1-Loconet+HSI-s88, 70 blocks, 160 sensors, 4 boosters. M&K 3rail.
Goal: Scheduled Pass. trains, "OPS" with car cards etc.. Using andRoc and Rocweb/xs throttles.
Rocrail on WinXP.
rvooyen
 

Re: [Issue] Rocweb loco pop-up. Not working

Postby rjversluis » 26.07.2017, 10:28

Robert,

which browser are you using?
Please attach your files so I can test with it. (incl. images also.)
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Re: [Issue] Rocweb loco pop-up. Not working

Postby rjversluis » 26.07.2017, 10:34

Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Re: [Issue] Rocweb loco pop-up. Not working

Postby rvooyen » 26.07.2017, 11:11

Here is an issue.zip file.

It is all browsers on all devices. The loc is in a block. The system on auto.
I have just updated all browsers (Chrome Firefox) to latest. The same!

If I click on an empty block then the pop up is shown.
If I click on a loc in a block nothing seems to happen.

Only if I click on a loc in a block after clicking on an empty block does the loc show, but no schedules.

After all updates it remains the same - all browsers on all devices - no action on long click. Except blue X.

Robert
You do not have the required permissions to view the files attached to this post.
Robert van Ooijen.
Building Rhineland2. 3 levels. CS=IB1-Loconet+HSI-s88, 70 blocks, 160 sensors, 4 boosters. M&K 3rail.
Goal: Scheduled Pass. trains, "OPS" with car cards etc.. Using andRoc and Rocweb/xs throttles.
Rocrail on WinXP.
rvooyen
 

Re: [Issue] Rocweb loco pop-up. Not working

Postby rjversluis » 26.07.2017, 11:31

Hi Robert,

thanks.
I found the problem which had todo with trying to evaluate sub-blocks in locations.
I fixed it. Please test and report.
12.463+
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Re: [Issue] Rocweb loco pop-up. Not working

Postby rjversluis » 26.07.2017, 12:27

In about an hour the new Windows build must be available for testing.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Re: [Issue] Rocweb loco pop-up. Not working

Postby RedTrain » 26.07.2017, 14:10

rjversluis wrote:I published Androc 522 at Play Store.


Hello Rob - on my phone, andRoc reports Version 551. Do I miss something?
Edit: ah was a typo - I have now updated from playstore to 552 as well
Beste Grüsse / kind regards - Carlo

[H0m 2L DCC] Layout "Rhaetian Flyer" Swiss Proto-Freelance RhB+FO+zB; 6% completed, partly operational
W10, Ubuntu 16.04, Rocweb, andRoc; CANbus GC1e, GC3-ORD3, GC2, GC6; Bemo, Peco, handlaid;
RedTrain
 

Re: [Issue] Rocweb loco pop-up. Not working

Postby rvooyen » 26.07.2017, 15:10

Thanks Rob,

All is now working again as before after I loaded 12463.

So now both Rocweb(xs) and andRoc are working again and trains can be controlled and scheduled.

THANKS. :beer: :beer:

Robert
Robert van Ooijen.
Building Rhineland2. 3 levels. CS=IB1-Loconet+HSI-s88, 70 blocks, 160 sensors, 4 boosters. M&K 3rail.
Goal: Scheduled Pass. trains, "OPS" with car cards etc.. Using andRoc and Rocweb/xs throttles.
Rocrail on WinXP.
rvooyen
 


Return to Rocweb