Rocweb wishes

All about the Rocrail WEB solution.

Re: Rocweb wishes

Postby rjversluis » 21.06.2015, 15:21

Hi Tom,

normally you do not have to fiddle with the browser settings.
Local storage will be deleted every time if you are using private browsing or you restricted the browser to save anything at all.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBUS - CANGCx ] - [ G: CBUS - CANGCx ]
rjversluis
Site Admin
 

Re: Rocweb wishes

Postby smitt48 » 21.06.2015, 15:31

Hi Rob,

Thanks! So the solution is indeed to keep history.

What about sliderdelta, how is that stored?

Thanks for your valuable insight,

Tom
Kind regards,
Tom Smit
Kralendijk, Bonaire - Dutch Caribbean

Märklin M & K-rails with ECoS2 (4.2.4) - Win10
RoSoft: S88n & WDD switch & SDD signal decoders
Display: Tri-ang from 1950's, Märklin from early 1960's
In build phase
smitt48
 

Re: Rocweb wishes

Postby rjversluis » 21.06.2015, 15:51

Hi Tom,
smitt48 wrote:What about sliderdelta, how is that stored?

in the same way all other stuff is stored.
If its not stored a default value will be used.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBUS - CANGCx ] - [ G: CBUS - CANGCx ]
rjversluis
Site Admin
 

Re: Rocweb wishes

Postby Blackpixel83 » 25.06.2015, 16:21

Do you want a french translation ?
You do not have the required permissions to view the files attached to this post.
Christophe Lygrisse.
A.M.F.M. VP.
Blackpixel83
 

Re: Rocweb wishes

Postby rjversluis » 25.06.2015, 16:38

Hi Christophe,

yes of course.
But you must use an UTF-8 editor and the getString() function is missing.
The uploaded text file ist not UTF-8.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBUS - CANGCx ] - [ G: CBUS - CANGCx ]
rjversluis
Site Admin
 

Re: Rocweb wishes

Postby Blackpixel83 » 25.06.2015, 18:02

Ho sory,

two questions ,

what is "second hand" in options ?
what does "Swap placing" mean for blocks ?
it seam I'm not enouth bright to play with :)

Christophe.
Christophe Lygrisse.
A.M.F.M. VP.
Blackpixel83
 

Re: Rocweb wishes

Postby smitt48 » 25.06.2015, 18:29

Hi Christophe,

second hand = trotteuse d'une horloge

swap placing = changer l'orientation

Tom
Kind regards,
Tom Smit
Kralendijk, Bonaire - Dutch Caribbean

Märklin M & K-rails with ECoS2 (4.2.4) - Win10
RoSoft: S88n & WDD switch & SDD signal decoders
Display: Tri-ang from 1950's, Märklin from early 1960's
In build phase
smitt48
 

Re: Rocweb wishes

Postby Blackpixel83 » 25.06.2015, 18:40

Hi Tom,

La trotteuse :) lol I did not see it !

"swap placing" change the locomotive direction ?

Christophe
Christophe Lygrisse.
A.M.F.M. VP.
Blackpixel83
 

Re: Rocweb wishes

Postby smitt48 » 25.06.2015, 18:46

Christophe,

Mais oui!

Tom
Kind regards,
Tom Smit
Kralendijk, Bonaire - Dutch Caribbean

Märklin M & K-rails with ECoS2 (4.2.4) - Win10
RoSoft: S88n & WDD switch & SDD signal decoders
Display: Tri-ang from 1950's, Märklin from early 1960's
In build phase
smitt48
 

Re: Rocweb wishes

Postby rjversluis » 25.06.2015, 18:47

In Rocview:
Code: Select all
  <Msg id="swapplacing">
    <de txt="Ändern der Platzierung"/>
    <en txt="Swap placing"/>
    <nl txt="Omkeren"/>
    <sv txt="Byt plats"/>
    <fr txt="Changer l'orientation"/>
...


In fact the loco is logically swapped, so direction forwards is after a swap in the other direction.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBUS - CANGCx ] - [ G: CBUS - CANGCx ]
rjversluis
Site Admin
 

Re: Rocweb wishes

Postby Blackpixel83 » 25.06.2015, 18:53

Thank you guys,

Better one knowing than one searching ! ;)
So I'll prefer "Changer de direction" !

Here is the file.

Christophe.
You do not have the required permissions to view the files attached to this post.
Christophe Lygrisse.
A.M.F.M. VP.
Blackpixel83
 

Re: Rocweb wishes

Postby Besra » 25.06.2015, 20:24

Hi Christophe,

in fact placing and direction are not the same! As Rob wrote
Rob wrote:[...] the loco is logically swapped, so direction forwards is after a swap in the other direction.

Forwards is in the other direction but not reverse :? . I know, this is hard to understand.
See http://wiki.rocrail.net/doku.php?id=direction-en for more info on directions and placing.

Best regards
Besra
Maerklin H0, DCC and MM, Intellibox (I) via ULNI, Booster Tams B4, Throttle Digitrax UT4, LocoNet.
Loco decoders: Zimo, Uhlenbrock, Maerklin & ESU.
Rocweb, Win10 32bit & 64bit
Besra
 

Re: Rocweb wishes

Postby rjversluis » 25.06.2015, 20:42

Hi Christophe,
Blackpixel83 wrote:Thank you guys,

Better one knowing than one searching ! ;)
So I'll prefer "Changer de direction" !

Here is the file.

Christophe.

looks good and I will merge it in tomorrow.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBUS - CANGCx ] - [ G: CBUS - CANGCx ]
rjversluis
Site Admin
 

Re: Rocweb wishes

Postby rvooyen » 25.06.2015, 20:44

I also after using Rocrail for some years now, still cannot figure out the reason for the swap placing and the change block side enter and reverse for locs function.

If the loc is pointing in the right direction AND the block shows the loc in the right direction, still it will not start. You then have to swap placing and,or change blockside enter before it will start.

The experts can explain this perhaps, Personally I think it could be simpler, but I leave to the experts the full explanation of and for this.

For the rest Rocrail is great, would not want anything else, and I have moved from the program Koploper to Rocrail.

Regards,

Robert
Robert van Ooijen.
Building Rhineland2. 3 levels. CS=IB1-Loconet+HSI-s88, 70 blocks, 160 sensors, 4 boosters. M&K 3rail.
Goal: Scheduled Pass. trains, "OPS" with car cards etc.. Using andRoc and Rocweb/xs throttles.
Rocrail on WinXP.
rvooyen
 

Re: Rocweb wishes

Postby Blackpixel83 » 25.06.2015, 20:56

Besra wrote:Hi Christophe,

in fact placing and direction are not the same! As Rob wrote
Rob wrote:[...] the loco is logically swapped, so direction forwards is after a swap in the other direction.

Forwards is in the other direction but not reverse :? . I know, this is hard to understand.
See http://wiki.rocrail.net/doku.php?id=direction-en for more info on directions and placing.

Best regards
Besra


Yes I see, so l'll check for the best translation (not easy in this case :) ).
thank you.
Christophe Lygrisse.
A.M.F.M. VP.
Blackpixel83
 

PreviousNext

Return to Rocweb