[Solved] Error messages at startup Rocrail server

Moderator: Moderators

[Solved] Error messages at startup Rocrail server

Postby agre30 » 10.03.2013, 14:46

When I start Rocrail server I get some error messages conserning the HSI88. the messages are:
- S88 module count does not match! should be 4 instead of 6
- Timeout waiting for version response
- Init response expecting 0x73, length 3 but got 0x00, lenght 0
When I start Rocview the HSI88 doesn't work.

Next thing I do is end the Rocrail server with 'q' and restart. Then the error messages don't appear and everything workx fine.
When working with Windows XP I had no problems, but since I use Lubuntu I got these messages.

What can I do to make the HSI88 work properly?
You do not have the required permissions to view the files attached to this post.
Last edited by agre30 on 13.03.2013, 17:08, edited 1 time in total.
Albert,
Märklin 3-rail
Lubuntu 16.04 (server and client) / TamsMC - Booster B-2 / HSI88 / S88N
Stoom / steam / dampf / diesel / E-loc
agre30
 

Postby agre30 » 10.03.2013, 15:28

I think this thread has a relationship with my problem: http://forum.rocrail.net/viewtopic.php?t=5325&highlight=
Albert,
Märklin 3-rail
Lubuntu 16.04 (server and client) / TamsMC - Booster B-2 / HSI88 / S88N
Stoom / steam / dampf / diesel / E-loc
agre30
 

Postby rjversluis » 10.03.2013, 16:54

Hi Albert,

if you switch of the info trace level the trace file is unusable.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Postby agre30 » 10.03.2013, 18:25

Hi Rob,

Thanks for your response.
I started Rocrail with the -info parameter. No error messages on the HSI88. Everything works fine. Strange isn't it?

I will turn the info trace on and post a new trace file.

Greetings,
Albert.
Albert,
Märklin 3-rail
Lubuntu 16.04 (server and client) / TamsMC - Booster B-2 / HSI88 / S88N
Stoom / steam / dampf / diesel / E-loc
agre30
 

Postby agre30 » 11.03.2013, 21:00

Hello Rob,
When I turn trace level 'info' on the problem does not occur. Is it still usefull to upload an issue?

Albert.
Albert,
Märklin 3-rail
Lubuntu 16.04 (server and client) / TamsMC - Booster B-2 / HSI88 / S88N
Stoom / steam / dampf / diesel / E-loc
agre30
 

Postby rjversluis » 11.03.2013, 22:50

Hi Albert,

provide a trace file with the following error lines:

Code: Select all
- S88 module count does not match! should be 4 instead of 6
- Timeout waiting for version response
- Init response expecting 0x73, length 3 but got 0x00, lenght 0
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Postby agre30 » 12.03.2013, 20:34

Hi Rob,
When I turn user trace level automatic and monitor on there is no error. Everything works fine. So, I can't give you a trace file.
Could it be that the HSI88 needs more time to initiate


Greetings,
Albert
Albert,
Märklin 3-rail
Lubuntu 16.04 (server and client) / TamsMC - Booster B-2 / HSI88 / S88N
Stoom / steam / dampf / diesel / E-loc
agre30
 

Postby rjversluis » 12.03.2013, 21:22

Hi Albert,

I don't understand how you could see those trace lines if they do not show up if you activate the trace...
Just leave all levels switch off and provide the trace with those lines...
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Postby agre30 » 12.03.2013, 21:30

Hi Rob,
All the trace levels are off.
I start Rocrail server as a root because I use DDX.
Here is the trace file with the error messages.

Albert.
You do not have the required permissions to view the files attached to this post.
Albert,
Märklin 3-rail
Lubuntu 16.04 (server and client) / TamsMC - Booster B-2 / HSI88 / S88N
Stoom / steam / dampf / diesel / E-loc
agre30
 

Postby rjversluis » 12.03.2013, 22:17

Hi Albert,

I added in 4830 a startup sleep and a wakeup sequence.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Postby agre30 » 13.03.2013, 17:09

Hi Rob,
I installed the update and with all the trace levels turned off there are no error messages.

Thanks for your help.

Albert.
Albert,
Märklin 3-rail
Lubuntu 16.04 (server and client) / TamsMC - Booster B-2 / HSI88 / S88N
Stoom / steam / dampf / diesel / E-loc
agre30
 

Error message at startup of Rocrail with HSI88

Postby lemi » 16.03.2013, 13:46

Hello,

I have a problem at the startup of the Rocrail server.

This is the message from the log file:
"20130316.132827.296 r9999W hsi88fb OHSI88 0547 Init response expecting 0x73, length 3 but got 0x0D, length 1"

Then the HSI88 will not work, and I do not get feedback states.

Following version I have tested:
Revision 4827 -> OK
Revision 4830 -> NOK
Revision 4863 -> NOK

Please can some one help me?
I have a LDT HSI-88-USB.

Thank you

lemi
You do not have the required permissions to view the files attached to this post.
lemi
 

Postby rjversluis » 16.03.2013, 13:57

Hi lemi,

can you test 4864+?
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Error message at startup of Rocrail with HSI88

Postby lemi » 16.03.2013, 14:07

Hello,

yes, I will test it as soon a new version is online.

Thanks

lemi
lemi
 

Error message at startup of Rocrail with HSI88

Postby lemi » 16.03.2013, 19:47

Hello,

now it works correct.

Thank you for the very quick fix.

Best regards

lemi
lemi
 


Return to HSI88

cron