Switch over on the main line

Switch over on the main line

Postby 4527pink » 03.04.2018, 08:12

I have two laptops one with win 7 ,the other win 10, for the layout
This is in regards of a main up and down line for switching over.
So with the track layout switch diagram, I have set the two of them, to show the path has been set to cross for the main up line to the
main down line,
under win 7 works,
but under win 10 this does not happen you have to throw each switch diagram to set the path,
wondering if could ask for some help please.
Andrew.
4527pink
 

Re: Switch over on the main line

Postby rjversluis » 03.04.2018, 14:38

Hi Andrew,

I do not understand your issue.

Attach some screenshots or what ever to make it clear.
Also you should attach your files.
http://wiki.rocrail.net/doku.php?id=issue-en
There is only one source of Rocrail, and there is no switch for detecting Windows XP...10.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Re: Switch over on the main line

Postby 4527pink » 03.04.2018, 16:02

You got two main lines the up and down you set the points to allow the train to cross over from one track to the other
on the layout you can see the points have changed over to allow the train to cross over from the up to the down main line
But on the computer screen does not show you this is set to allow the train for the cross over.
Andrew
Last edited by 4527pink on 03.04.2018, 16:08, edited 1 time in total.
4527pink
 

Re: Switch over on the main line

Postby rjversluis » 03.04.2018, 16:06

can't help you without screenshots and files.
Best Regards, Rob.
:!: PS: Do not forget to attach the usual files.
:!: PS: Nicht vergessen die übliche Dateien an zu hängen.
[ macOS - Linux] - [ N: CBus - CAN-GCA ] - [ 0: RocNetNode - GCA-Pi ]
rjversluis
Site Admin
 

Re: Switch over on the main line

Postby 4527pink » 03.04.2018, 16:10

That something else i have to learn to do
As well
Andrew
4527pink
 

Re: Switch over on the main line

Postby smitt48 » 03.04.2018, 16:26

Hi Andrew,

Here is a picture that shows upload attachment, use this to add a file or a picture to the forum.
upload.PNG


Tom
You do not have the required permissions to view the files attached to this post.
Kind regards,
Tom Smit
Kralendijk, Bonaire - Dutch Caribbean

Märklin M & K-rails with ECoS2 (4.2.4) - Win10
RoSoft: S88n & WDD switch & SDD signal decoders
Display: Tri-ang from 1950's, Märklin from early 1960's
In build phase
smitt48
 


Return to Smalltalk